netdev - Re: mlx5 endpoint driver problem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <0b1ffba7-b4f5-c1b9-f3ec-2efe16702d5c@synopsys.com>
Date:   Tue, 9 May 2017 18:57:14 +0100
From:   Joao Pinto <Joao.Pinto@...opsys.com>
To:     Saeed Mahameed <saeedm@....mellanox.co.il>,
        Joao Pinto <Joao.Pinto@...opsys.com>
CC:     Saeed Mahameed <saeedm@...lanox.com>,
        netdev <netdev@...r.kernel.org>
Subject: Re: mlx5 endpoint driver problem


Hi again Saeed,

Às 6:44 PM de 5/9/2017, Saeed Mahameed escreveu:
> On Tue, May 9, 2017 at 8:38 PM, Joao Pinto <Joao.Pinto@...opsys.com> wrote:
>> Hi Saeed,
>>
>> Às 6:35 PM de 5/9/2017, Saeed Mahameed escreveu:
>>> On Tue, May 9, 2017 at 7:25 PM, Joao Pinto <Joao.Pinto@...opsys.com> wrote:
>>>> Hello,
>>>>
>>>> I am making tests with a Mellanox MLX5 Endpoint, and I am getting kernel hangs
>>>> when trying to enable the hca:
>>>>
>>>> mlx5_core 0000:01:00.0: enabling device (0000 -> 0002)
>>>> mlx5_core 0000:01:00.0: Warning: couldn't set 64-bit PCI DMA mask
>>>> mlx5_core 0000:01:00.0: Warning: couldn't set 64-bit consistent PCI DMA mask
>>>> mlx5_core 0000:01:00.0: firmware version: 16.19.21102
>>>> INFO: task swapper:1 blocked for more than 10 seconds.
>>>>       Not tainted 4.11.0-BETAMSIX1 #51
>>>> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>>>> swapper         D    0     1      0 0x00000000
>>>>
>>>> Stack Trace:
>>>>   __switch_to+0x0/0x94
>>>>   __schedule+0x1da/0x8b0
>>>>   schedule+0x26/0x6c
>>>>   schedule_timeout+0x2da/0x380
>>>>   wait_for_completion+0x92/0x104
>>>>   mlx5_cmd_exec+0x70e/0xd60
>>>>   mlx5_load_one+0x1b4/0xad8
>>>>   init_one+0x404/0x600
>>>>   pci_device_probe+0x122/0x1f0
>>>>   really_probe+0x1ac/0x348
>>>>   __driver_attach+0xa8/0xd0
>>>>   bus_for_each_dev+0x3c/0x74
>>>>   bus_add_driver+0xc2/0x184
>>>>   driver_register+0x50/0xec
>>>>   init+0x40/0x60
>>>>
>>>> (...)
>>>>
>>>> Stack Trace:
>>>>   __switch_to+0x0/0x94
>>>>   __schedule+0x1da/0x8b0
>>>>   schedule+0x26/0x6c
>>>>   schedule_timeout+0x2da/0x380
>>>>   wait_for_completion+0x92/0x104
>>>>   mlx5_cmd_exec+0x70e/0xd60
>>>>   mlx5_load_one+0x1b4/0xad8
>>>>   init_one+0x404/0x600
>>>>   pci_device_probe+0x122/0x1f0
>>>>   really_probe+0x1ac/0x348
>>>>   __driver_attach+0xa8/0xd0
>>>>   bus_for_each_dev+0x3c/0x74
>>>>   bus_add_driver+0xc2/0x184
>>>>   driver_register+0x50/0xec
>>>>   init+0x40/0x60
>>>> mlx5_core 0000:01:00.0: wait_func:882:(pid 1): ENABLE_HCA(0x104) timeout. Will
>>>> cause a leak of a command resource
>>>> mlx5_core 0000:01:00.0: enable hca failed
>>>> mlx5_core 0000:01:00.0: mlx5_load_one failed with error code -110
>>>> mlx5_core: probe of 0000:01:00.0 failed with error -110
>>>>
>>>> Could you give me a clue of what might be happennig?
>>>>
>>>
>>> Hi Joao,
>>>
>>> Looks like FW is not responding, most likely due to the DMA mask
>>> setting warnings, which architecture is this ?
>>>
>>>> Thanks,
>>>> Joao
>>
>> I am working with a 32-bit ARC processor based board, connected to a prototyped
>> Gen4 PCI RC.
>>
> 
> Ok, i will consult with our PCI and FW experts and get back to you.
> 
> please note that the current mlx5 driver was never tested on 32-bit
> architecture and might not work properly for you.

I have new data for you. My colleague is using a Mellanox MT27800 Family
(ConnectX-5) with Firmware version 16.19.148 and it does have hangs, but it
fails in the CPU mask:

mlx5_core 0000:01:00.0: enabling device (0000 -> 0002)
mlx5_core 0000:01:00.0: Warning: couldn't set 64-bit PCI DMA mask
mlx5_core 0000:01:00.0: Warning: couldn't set 64-bit consistent PCI DMA mask
mlx5_core 0000:01:00.0: firmware version: 16.19.148
mlx5_core 0000:01:00.0: Port module event: module 0, Cable unplugged
mlx5_core 0000:01:00.0: mlx5_irq_set_affinity_hint:628:(pid 1):
irq_set_affinity_hint failed,irq 0x0032
mlx5_core 0000:01:00.0: Failed to alloc affinity hint cpumask
mlx5_core 0000:01:00.0: mlx5_load_one failed with error code -22
mlx5_core: probe of 0000:01:00.0 failed with error -22

Mine is a Mellanox MT28800 Family (ConnectX-5) with Firmware Version 16.19.21102.

Hopes it gives more data for analysis.

Thanks,
Joao

> 
>> Thanks,
>> Joao
>>
>>
>>