lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170512115650.11635-3-saeedm@mellanox.com>
Date:   Fri, 12 May 2017 14:56:46 +0300
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Gal Pressman <galp@...lanox.com>,
        kernel-team@...com, Saeed Mahameed <saeedm@...lanox.com>
Subject: [net 2/6] net/mlx5e: Use the correct pause values for ethtool advertising

From: Gal Pressman <galp@...lanox.com>

Query the operational pause from firmware (PFCC register) instead of
always passing zeros.

Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Gal Pressman <galp@...lanox.com>
Cc: kernel-team@...com
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 0a7734761ece..87a7a66363de 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -855,6 +855,8 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 	struct mlx5e_priv *priv    = netdev_priv(netdev);
 	struct mlx5_core_dev *mdev = priv->mdev;
 	u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {0};
+	u32 rx_pause = 0;
+	u32 tx_pause = 0;
 	u32 eth_proto_cap;
 	u32 eth_proto_admin;
 	u32 eth_proto_lp;
@@ -877,11 +879,13 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 	an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
 	an_status        = MLX5_GET(ptys_reg, out, an_status);
 
+	mlx5_query_port_pause(mdev, &rx_pause, &tx_pause);
+
 	ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
 	ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
 
 	get_supported(eth_proto_cap, link_ksettings);
-	get_advertising(eth_proto_admin, 0, 0, link_ksettings);
+	get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings);
 	get_speed_duplex(netdev, eth_proto_oper, link_ksettings);
 
 	eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
-- 
2.11.0

Powered by blists - more mailing lists