| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1494984364-19496-5-git-send-email-andrew@lunn.ch>
Date: Wed, 17 May 2017 03:26:02 +0200
From: Andrew Lunn <andrew@...n.ch>
To: David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next 4/6] net: phy: marvell: Refactor some bigger functions
Break big functions up by using a number of smaller helper
function. Solves some of the over 80 lines warnings, by reducing the
indentation level.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/phy/marvell.c | 484 ++++++++++++++++++++++++++--------------------
1 file changed, 271 insertions(+), 213 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index e9632f576a24..b84380db945e 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -695,102 +695,133 @@ static int m88e3016_config_init(struct phy_device *phydev)
return marvell_config_init(phydev);
}
-static int m88e1111_config_init(struct phy_device *phydev)
+static int m88e1111_config_init_rgmii(struct phy_device *phydev)
{
int err;
int temp;
- if (phy_interface_is_rgmii(phydev)) {
- temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
- if (temp < 0)
- return temp;
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
- temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
- } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
- temp &= ~MII_M1111_TX_DELAY;
- temp |= MII_M1111_RX_DELAY;
- } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
- temp &= ~MII_M1111_RX_DELAY;
- temp |= MII_M1111_TX_DELAY;
- }
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
- err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
- if (err < 0)
- return err;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
- temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- if (temp < 0)
- return temp;
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
- temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
- if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
- temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
- else
- temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
+ if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
+ temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
+ else
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
- err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
- if (err < 0)
- return err;
- }
+ return phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+}
- if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
- temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- if (temp < 0)
- return temp;
+static int m88e1111_config_init_sgmii(struct phy_device *phydev)
+{
+ int err;
+ int temp;
- temp &= ~(MII_M1111_HWCFG_MODE_MASK);
- temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
- temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
- err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
- if (err < 0)
- return err;
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+ temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
- /* make sure copper is selected */
- err = phy_read(phydev, MII_M1145_PHY_EXT_ADDR_PAGE);
- if (err < 0)
- return err;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
- err = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE,
- err & (~0xff));
- if (err < 0)
- return err;
- }
+ /* make sure copper is selected */
+ err = phy_read(phydev, MII_M1145_PHY_EXT_ADDR_PAGE);
+ if (err < 0)
+ return err;
- if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
- temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
- if (temp < 0)
- return temp;
- temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
- err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
- if (err < 0)
- return err;
+ return phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, err & (~0xff));
+}
- temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- if (temp < 0)
- return temp;
- temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
- temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
- err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
- if (err < 0)
+static int m88e1111_config_init_rtbi(struct phy_device *phydev)
+{
+ int err;
+ int temp;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK |
+ MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+
+ /* soft reset */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ do
+ temp = phy_read(phydev, MII_BMCR);
+ while (temp & BMCR_RESET);
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK |
+ MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI |
+ MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+
+ return phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+}
+
+static int m88e1111_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ if (phy_interface_is_rgmii(phydev)) {
+ err = m88e1111_config_init_rgmii(phydev);
+ if (err)
return err;
+ }
- /* soft reset */
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ err = m88e1111_config_init_sgmii(phydev);
if (err < 0)
return err;
- do
- temp = phy_read(phydev, MII_BMCR);
- while (temp & BMCR_RESET);
+ }
- temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- if (temp < 0)
- return temp;
- temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
- temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
- err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
+ err = m88e1111_config_init_rtbi(phydev);
if (err < 0)
return err;
}
@@ -941,10 +972,63 @@ static int m88e1149_config_init(struct phy_device *phydev)
return phy_write(phydev, MII_BMCR, BMCR_RESET);
}
+static int m88e1145_config_init_rgmii(struct phy_device *phydev)
+{
+ int err;
+ int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
+
+ if (temp < 0)
+ return temp;
+
+ temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
+ err = phy_write(phydev, 0x1d, 0x0012);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, 0x1e);
+ if (temp < 0)
+ return temp;
+
+ temp &= 0xf03f;
+ temp |= 2 << 9; /* 36 ohm */
+ temp |= 2 << 6; /* 39 ohm */
+
+ err = phy_write(phydev, 0x1e, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x3);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x8000);
+ }
+ return err;
+}
+
+static int m88e1145_config_init_sgmii(struct phy_device *phydev)
+{
+ int temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
+
+ if (temp < 0)
+ return temp;
+
+ temp &= ~MII_M1145_HWCFG_MODE_MASK;
+ temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
+
+ return phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
+}
+
static int m88e1145_config_init(struct phy_device *phydev)
{
int err;
- int temp;
/* Take care of errata E0 & E1 */
err = phy_write(phydev, 0x1d, 0x001b);
@@ -964,54 +1048,13 @@ static int m88e1145_config_init(struct phy_device *phydev)
return err;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
- int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
-
- if (temp < 0)
- return temp;
-
- temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
-
- err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
+ err = m88e1145_config_init_rgmii(phydev);
if (err < 0)
return err;
-
- if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
- err = phy_write(phydev, 0x1d, 0x0012);
- if (err < 0)
- return err;
-
- temp = phy_read(phydev, 0x1e);
- if (temp < 0)
- return temp;
-
- temp &= 0xf03f;
- temp |= 2 << 9; /* 36 ohm */
- temp |= 2 << 6; /* 39 ohm */
-
- err = phy_write(phydev, 0x1e, temp);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1d, 0x3);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0x8000);
- if (err < 0)
- return err;
- }
}
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
- temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
- if (temp < 0)
- return temp;
-
- temp &= ~MII_M1145_HWCFG_MODE_MASK;
- temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
- temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
-
- err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
+ err = m88e1145_config_init_sgmii(phydev);
if (err < 0)
return err;
}
@@ -1072,6 +1115,110 @@ static int marvell_update_link(struct phy_device *phydev, int fiber)
return 0;
}
+static int marvell_read_status_page_an(struct phy_device *phydev,
+ int fiber)
+{
+ int status;
+ int lpa;
+ int lpagb;
+ int adv;
+
+ status = phy_read(phydev, MII_M1011_PHY_STATUS);
+ if (status < 0)
+ return status;
+
+ lpa = phy_read(phydev, MII_LPA);
+ if (lpa < 0)
+ return lpa;
+
+ lpagb = phy_read(phydev, MII_STAT1000);
+ if (lpagb < 0)
+ return lpagb;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ lpa &= adv;
+
+ if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ status = status & MII_M1011_PHY_STATUS_SPD_MASK;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ switch (status) {
+ case MII_M1011_PHY_STATUS_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MII_M1011_PHY_STATUS_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ if (!fiber) {
+ phydev->lp_advertising =
+ mii_stat1000_to_ethtool_lpa_t(lpagb) |
+ mii_lpa_to_ethtool_lpa_t(lpa);
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ /* The fiber link is only 1000M capable */
+ phydev->lp_advertising = fiber_lpa_to_ethtool_lpa_t(lpa);
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ if (!(lpa & LPA_PAUSE_FIBER)) {
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+ } else if ((lpa & LPA_PAUSE_ASYM_FIBER)) {
+ phydev->pause = 1;
+ phydev->asym_pause = 1;
+ } else {
+ phydev->pause = 1;
+ phydev->asym_pause = 0;
+ }
+ }
+ }
+ return 0;
+}
+
+static int marvell_read_status_page_fixed(struct phy_device *phydev)
+{
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+ phydev->lp_advertising = 0;
+
+ return 0;
+}
+
/* marvell_read_status_page
*
* Description:
@@ -1082,12 +1229,8 @@ static int marvell_update_link(struct phy_device *phydev, int fiber)
*/
static int marvell_read_status_page(struct phy_device *phydev, int page)
{
- int adv;
- int err;
- int lpa;
- int lpagb;
- int status = 0;
int fiber;
+ int err;
/* Detect and update the link, but return if there
* was an error
@@ -1101,97 +1244,12 @@ static int marvell_read_status_page(struct phy_device *phydev, int page)
if (err)
return err;
- if (phydev->autoneg == AUTONEG_ENABLE) {
- status = phy_read(phydev, MII_M1011_PHY_STATUS);
- if (status < 0)
- return status;
-
- lpa = phy_read(phydev, MII_LPA);
- if (lpa < 0)
- return lpa;
-
- lpagb = phy_read(phydev, MII_STAT1000);
- if (lpagb < 0)
- return lpagb;
-
- adv = phy_read(phydev, MII_ADVERTISE);
- if (adv < 0)
- return adv;
-
- lpa &= adv;
-
- if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
- phydev->duplex = DUPLEX_FULL;
- else
- phydev->duplex = DUPLEX_HALF;
-
- status = status & MII_M1011_PHY_STATUS_SPD_MASK;
- phydev->pause = 0;
- phydev->asym_pause = 0;
-
- switch (status) {
- case MII_M1011_PHY_STATUS_1000:
- phydev->speed = SPEED_1000;
- break;
-
- case MII_M1011_PHY_STATUS_100:
- phydev->speed = SPEED_100;
- break;
-
- default:
- phydev->speed = SPEED_10;
- break;
- }
-
- if (!fiber) {
- phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb) |
- mii_lpa_to_ethtool_lpa_t(lpa);
-
- if (phydev->duplex == DUPLEX_FULL) {
- phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
- phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
- }
- } else {
- /* The fiber link is only 1000M capable */
- phydev->lp_advertising = fiber_lpa_to_ethtool_lpa_t(lpa);
-
- if (phydev->duplex == DUPLEX_FULL) {
- if (!(lpa & LPA_PAUSE_FIBER)) {
- phydev->pause = 0;
- phydev->asym_pause = 0;
- } else if ((lpa & LPA_PAUSE_ASYM_FIBER)) {
- phydev->pause = 1;
- phydev->asym_pause = 1;
- } else {
- phydev->pause = 1;
- phydev->asym_pause = 0;
- }
- }
- }
- } else {
- int bmcr = phy_read(phydev, MII_BMCR);
-
- if (bmcr < 0)
- return bmcr;
-
- if (bmcr & BMCR_FULLDPLX)
- phydev->duplex = DUPLEX_FULL;
- else
- phydev->duplex = DUPLEX_HALF;
-
- if (bmcr & BMCR_SPEED1000)
- phydev->speed = SPEED_1000;
- else if (bmcr & BMCR_SPEED100)
- phydev->speed = SPEED_100;
- else
- phydev->speed = SPEED_10;
-
- phydev->pause = 0;
- phydev->asym_pause = 0;
- phydev->lp_advertising = 0;
- }
+ if (phydev->autoneg == AUTONEG_ENABLE)
+ err = marvell_read_status_page_an(phydev, fiber);
+ else
+ err = marvell_read_status_page_fixed(phydev);
- return 0;
+ return err;
}
/* marvell_read_status
--
2.11.0
Powered by blists - more mailing lists