[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1495573486-31827-1-git-send-email-andrew@lunn.ch>
Date: Tue, 23 May 2017 23:04:41 +0200
From: Andrew Lunn <andrew@...n.ch>
To: David Miller <davem@...emloft.net>
Cc: Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
netdev <netdev@...r.kernel.org>, Andrew Lunn <andrew@...n.ch>
Subject: [PATCHv2 net-next 0/5] net: dsa: mv88e6xxx: Add basic SERDES support
Some of the Marvell switches are SERDES interface, which must be
powered up before packets can be passed. This is particularly true on
the 6390, where the SERDES defaults to down, probably to save power.
This series refactors the existing SERDES support for the 6352, and
adds 6390 support.
v2:
Split phy functions out into phy.[ch]
Don't add MV88E6XXX_FLAG_G1_ATU_FID back again
Move the serdes op up in mv88e6xxx_ops
Move some #defines into serdes.h
Add a mv88e6xxx_serdes_power()
Don't keep moving calls to this helper around in the code
Andrew Lunn (5):
net: dsa: mv88e6xxx: Move phy functions into phy.[ch]
net: dsa: mv88e6xxx: Refactor mv88e6352 SERDES code into an op
net: dsa: mv88e6xxx: Remove SERDES flag
net: dsa: mv88e6xxx: mv88e6390X SERDES support
dsa: mv88e6xxx: Enable/Disable SERDES on port enable/disable
drivers/net/dsa/mv88e6xxx/Makefile | 2 +
drivers/net/dsa/mv88e6xxx/chip.c | 315 ++++++----------------------------
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 31 +---
drivers/net/dsa/mv88e6xxx/phy.c | 232 +++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/phy.h | 40 +++++
drivers/net/dsa/mv88e6xxx/serdes.c | 229 ++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/serdes.h | 48 ++++++
7 files changed, 611 insertions(+), 286 deletions(-)
create mode 100644 drivers/net/dsa/mv88e6xxx/phy.c
create mode 100644 drivers/net/dsa/mv88e6xxx/phy.h
create mode 100644 drivers/net/dsa/mv88e6xxx/serdes.c
create mode 100644 drivers/net/dsa/mv88e6xxx/serdes.h
--
2.11.0
Powered by blists - more mailing lists