lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <1495785519-1468-2-git-send-email-bogdan.purcareata@nxp.com> Date: Fri, 26 May 2017 07:58:38 +0000 From: Bogdan Purcareata <bogdan.purcareata@....com> To: <andrew@...n.ch>, <f.fainelli@...il.com>, <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org> Subject: [PATCH v3 1/2] net: phy: Add Cortina CS4340 driver Add basic support for Cortina PHY drivers. Support only CS4340 for now. The phys are not compatible with IEEE 802.3 clause 22/45 registers. Implement proper read_status support. The generic 10G phy driver causes bus register access errors. The driver should be described using the "ethernet-phy-id" device tree compatible. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@....com> --- v2 -> v3: - Add probe function to check the device we're talking with is the same as the one described in the device tree. - Change the link status (GPIO interrupt status) register and validate that the read is done from the right place (cable plug-in / plug-out). - Some functions + Kconfig entry renaming. v1 -> v2: - Rename "mdio-cortina.c" to "cortina.c" since it's a phy driver. - Test probing based on the "ethernet-phy-id" compatible. In the previous version, getting the phy_id via get_phy_c45_ids() involved an additional hack. Drop that approach and document probing in the commit message. drivers/net/phy/Kconfig | 5 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/cortina.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 121 insertions(+) create mode 100644 drivers/net/phy/cortina.c diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 22dea7f..8cd7a0e 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -240,6 +240,11 @@ config CICADA_PHY ---help--- Currently supports the cis8204 +config CORTINA_PHY + tristate "Cortina EDC CDR 10G Ethernet PHY" + ---help--- + Currently supports the CS4340 phy. + config DAVICOM_PHY tristate "Davicom PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 79365be..0de3e20 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_CICADA_PHY) += cicada.o +obj-$(CONFIG_CORTINA_PHY) += cortina.o obj-$(CONFIG_DAVICOM_PHY) += davicom.o obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_DP83848_PHY) += dp83848.o diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c new file mode 100644 index 0000000..209c022 --- /dev/null +++ b/drivers/net/phy/cortina.c @@ -0,0 +1,115 @@ +/* + * Copyright 2017 NXP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/module.h> +#include <linux/phy.h> + +#define PHY_ID_CS4340 0x13e51002 + +#define VILLA_GLOBAL_CHIP_ID_LSB 0x0 +#define VILLA_GLOBAL_CHIP_ID_MSB 0x1 + +#define VILLA_GLOBAL_GPIO_1_INTS 0x017 + +static int cortina_read_reg(struct phy_device *phydev, u16 regnum) +{ + return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, + MII_ADDR_C45 | regnum); +} + +static int cortina_config_aneg(struct phy_device *phydev) +{ + phydev->supported = SUPPORTED_10000baseT_Full; + phydev->advertising = SUPPORTED_10000baseT_Full; + + return 0; +} + +static int cortina_read_status(struct phy_device *phydev) +{ + int gpio_int_status, ret = 0; + + gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS); + if (gpio_int_status < 0) { + ret = gpio_int_status; + goto err; + } + + if (gpio_int_status & 0x8) { + /* up when edc_convergedS set */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + phydev->link = 1; + } else { + phydev->link = 0; + } + +err: + return ret; +} + +static int cortina_soft_reset(struct phy_device *phydev) +{ + return 0; +} + +static int cortina_probe(struct phy_device *phydev) +{ + u32 phy_id = 0, id_lsb, id_msb; + + /* Read device id from phy registers. */ + id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB); + if (id_lsb < 0) + return -ENXIO; + + phy_id = id_lsb << 16; + + id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB); + if (id_msb < 0) + return -ENXIO; + + phy_id |= id_msb; + + /* Make sure the device tree binding matched the driver with the + * right device. + */ + if (phy_id != phydev->drv->phy_id) { + phydev_err(phydev, "Error matching phy with %s driver\n", + phydev->drv->name); + return -ENODEV; + } + + return 0; +} + +static struct phy_driver cortina_driver[] = { +{ + .phy_id = PHY_ID_CS4340, + .phy_id_mask = 0xffffffff, + .name = "Cortina CS4340", + .config_aneg = cortina_config_aneg, + .read_status = cortina_read_status, + .soft_reset = cortina_soft_reset, + .probe = cortina_probe, +}, +}; + +module_phy_driver(cortina_driver); + +static struct mdio_device_id __maybe_unused cortina_tbl[] = { + { PHY_ID_CS4340, 0xffffffff}, + {}, +}; + +MODULE_DEVICE_TABLE(mdio, cortina_tbl); -- 1.9.1
Powered by blists - more mailing lists