[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170531071852.12422-16-clabbe.montjoie@gmail.com>
Date: Wed, 31 May 2017 09:18:46 +0200
From: Corentin Labbe <clabbe.montjoie@...il.com>
To: robh+dt@...nel.org, mark.rutland@....com,
maxime.ripard@...e-electrons.com, wens@...e.org,
linux@...linux.org.uk, catalin.marinas@....com,
will.deacon@....com, peppe.cavallaro@...com,
alexandre.torgue@...com
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...glegroups.com,
Corentin Labbe <clabbe.montjoie@...il.com>
Subject: [PATCH v6 15/21] arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
connections. It is very similar to the device found in the Allwinner
H3, but lacks the internal 100 Mbit PHY and its associated control
bits.
This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
it disabled at this level.
Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 35 +++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 2eeba0d44074..7a07353ac1f6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -309,6 +309,21 @@
bias-pull-up;
};
+ rmii_pins: rmii_pins {
+ pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+ "PD18", "PD19", "PD20", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
+ rgmii_pins: rgmii_pins {
+ pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+ "PD13", "PD15", "PD16", "PD17", "PD18",
+ "PD19", "PD20", "PD21", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
@@ -433,6 +448,26 @@
#size-cells = <0>;
};
+ emac: ethernet@...0000 {
+ compatible = "allwinner,sun50i-a64-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x100>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gic: interrupt-controller@...1000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
--
2.13.0
Powered by blists - more mailing lists