[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1460beebce4ba23722cfb185b0f9f884cca3b9e9.1496224930.git.leonard.crestez@nxp.com>
Date: Wed, 31 May 2017 13:29:30 +0300
From: Leonard Crestez <leonard.crestez@....com>
To: Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Andrew Lunn <andrew@...n.ch>, Shawn Guo <shawnguo@...nel.org>
CC: Andy Duan <fugang.duan@....com>, Johan Hovold <johan@...nel.org>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
<netdev@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v2 net 2/2] net: phy: micrel: Restore led_mode and clk_sel on resume
These bits seem to be lost after a suspend/resume cycle so just set them
again. Do this by splitting the handling of these bits into a function
that is also called on resume.
This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.
Signed-off-by: Leonard Crestez <leonard.crestez@....com>
---
drivers/net/phy/micrel.c | 42 ++++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 6a5fd18..b9252b8d8 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -268,23 +268,12 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
return ret;
}
-static int kszphy_config_init(struct phy_device *phydev)
+/* Some config bits need to be set again on resume, handle them here. */
+static int kszphy_config_reset(struct phy_device *phydev)
{
struct kszphy_priv *priv = phydev->priv;
- const struct kszphy_type *type;
int ret;
- if (!priv)
- return 0;
-
- type = priv->type;
-
- if (type->has_broadcast_disable)
- kszphy_broadcast_disable(phydev);
-
- if (type->has_nand_tree_disable)
- kszphy_nand_tree_disable(phydev);
-
if (priv->rmii_ref_clk_sel) {
ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
if (ret) {
@@ -295,11 +284,30 @@ static int kszphy_config_init(struct phy_device *phydev)
}
if (priv->led_mode >= 0)
- kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
+ kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
return 0;
}
+static int kszphy_config_init(struct phy_device *phydev)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ const struct kszphy_type *type;
+
+ if (!priv)
+ return 0;
+
+ type = priv->type;
+
+ if (type->has_broadcast_disable)
+ kszphy_broadcast_disable(phydev);
+
+ if (type->has_nand_tree_disable)
+ kszphy_nand_tree_disable(phydev);
+
+ return kszphy_config_reset(phydev);
+}
+
static int ksz8041_config_init(struct phy_device *phydev)
{
struct device_node *of_node = phydev->mdio.dev.of_node;
@@ -700,8 +708,14 @@ static int kszphy_suspend(struct phy_device *phydev)
static int kszphy_resume(struct phy_device *phydev)
{
+ int ret;
+
genphy_resume(phydev);
+ ret = kszphy_config_reset(phydev);
+ if (ret)
+ return ret;
+
/* Enable PHY Interrupts */
if (phy_interrupt_is_valid(phydev)) {
phydev->interrupts = PHY_INTERRUPT_ENABLED;
--
2.7.4
Powered by blists - more mailing lists