| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <alpine.LFD.2.20.1706011415500.1688@schleppi>
Date: Thu, 1 Jun 2017 14:34:08 +0200 (CEST)
From: Sebastian Ott <sebott@...ux.vnet.ibm.com>
To: Xin Long <lucien.xin@...il.com>
cc: "David S. Miller" <davem@...emloft.net>,
Haidong Li <haili@...hat.com>,
Nikolay Aleksandrov <nikolay@...ulusnetworks.com>,
Ivan Vecera <cera@...a.cz>,
Stephen Hemminger <stephen@...workplumber.org>,
network dev <netdev@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Heiko Carstens <heiko.carstens@...ibm.com>,
Martin Schwidefsky <schwidefsky@...ibm.com>
Subject: Re: Oops with commit 6d18c73 bridge: start hello_timer when enabling
KERNEL_STP in br_stp_start
On Thu, 1 Jun 2017, Xin Long wrote:
> On Thu, Jun 1, 2017 at 12:32 AM, Sebastian Ott
> <sebott@...ux.vnet.ibm.com> wrote:
> > [...]
> I couldn't see any bridge-related thing here, and it couldn't be reproduced
> with virbr0 (stp=1) on my box (on both s390x and x86_64), I guess there
> is something else in you machine.
>
> With the latest upstream kernel, can you remove libvirt (virbr0) and boot your
> machine normally, then:
> # brctl addbr br0
> # ip link set br0 up
> # brctl stp br0 on
>
> to check if it will still hang.
Nope. That doesn't hang.
> If it can't be reproduced in this way, pls add this on your kernel:
>
> --- a/net/bridge/br_stp_if.c
> +++ b/net/bridge/br_stp_if.c
> @@ -178,9 +178,11 @@ static void br_stp_start(struct net_bridge *br)
> br->stp_enabled = BR_KERNEL_STP;
> br_debug(br, "using kernel STP\n");
>
> + WARN_ON(1);
> /* To start timers on any ports left in blocking */
> mod_timer(&br->hello_timer, jiffies + br->hello_time);
> br_port_state_selection(br);
> + pr_warn("hello timer start done\n");
> }
>
> spin_unlock_bh(&br->lock);
> diff --git a/net/bridge/br_stp_timer.c b/net/bridge/br_stp_timer.c
> index 60b6fe2..c98b3e5 100644
> --- a/net/bridge/br_stp_timer.c
> +++ b/net/bridge/br_stp_timer.c
> @@ -40,7 +40,7 @@ static void br_hello_timer_expired(unsigned long arg)
> if (br->dev->flags & IFF_UP) {
> br_config_bpdu_generation(br);
>
> - if (br->stp_enabled == BR_KERNEL_STP)
> + if (br->stp_enabled != BR_USER_STP)
> mod_timer(&br->hello_timer,
> round_jiffies(jiffies + br->hello_time));
>
>
> let's see if it hangs when starting the timer. Thanks.
No hang either:
[ 134.018104] ------------[ cut here ]------------
[ 134.018144] WARNING: CPU: 1 PID: 1339 at net/bridge/br_stp_if.c:181 br_stp_set_enabled+0x154/0x2b0 [bridge]
[ 134.018149] Modules linked in: bridge stp llc rdma_ucm ib_ucm ib_uverbs [...]
[ 134.018257] CPU: 1 PID: 1339 Comm: brctl Not tainted 4.12.0-rc3-00011-gf511c0b-dirty #587
[ 134.018262] Hardware name: IBM 2827 H66 705 (LPAR)
[ 134.018266] task: 00000000d141c100 task.stack: 00000000d1430000
[ 134.018271] Krnl PSW : 0704f00180000000 000003ff802bc4c4 (br_stp_set_enabled+0x154/0x2b0 [bridge])
[ 134.018286] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 134.018294] Krnl GPRS: 00000000c5eae501 00000000000005dc 0000000000000bb8 0000000000000001
[ 134.018298] 000003ff802bc42c 00000000d1433c78 0000000000000001 00000000d3ad2d60
[ 134.018303] 0000000000000002 000003ff802c21a8 00000000d3ad2d60 00000000fffffffe
[ 134.018308] 00000000d1671738 00000000000026a0 000003ff802bc42c 00000000d1433c38
[ 134.018320] Krnl Code: 000003ff802bc4b4: e54ca9180001 mvhi 2328(%r10),1
000003ff802bc4ba: c00400000000 brcl 0,3ff802bc4ba
#000003ff802bc4c0: a7f40001 brc 15,3ff802bc4c2
>000003ff802bc4c4: c418ffffb5aa lgrl %r1,3ff802b3018
000003ff802bc4ca: 4120ac10 la %r2,3088(%r10)
000003ff802bc4ce: e33010000004 lg %r3,0(%r1)
000003ff802bc4d4: e330a8d80008 ag %r3,2264(%r10)
000003ff802bc4da: c0e5ffffbc8b brasl %r14,3ff802b3df0
[ 134.018374] Call Trace:
[ 134.018384] ([<000003ff802bc42c>] br_stp_set_enabled+0xbc/0x2b0 [bridge])
[ 134.018393] [<000003ff802c21d2>] set_stp_state+0x2a/0x40 [bridge]
[ 134.018402] [<000003ff802c0f30>] store_bridge_parm+0xa8/0xf8 [bridge]
[ 134.018410] [<00000000004012f2>] kernfs_fop_write+0x132/0x208
[ 134.018417] [<000000000036088e>] __vfs_write+0x36/0x140
[ 134.018422] [<0000000000361b54>] vfs_write+0xbc/0x1a0
[ 134.018427] [<000000000036323e>] SyS_write+0x66/0xc0
[ 134.018434] [<00000000008ccc80>] system_call+0xc4/0x28c
[ 134.018438] 5 locks held by brctl/1339:
[ 134.018443] #0: (sb_writers#5){.+.+.+}, at: [<0000000000361b3e>] vfs_write+0xa6/0x1a0
[ 134.018462] #1: (&of->mutex){+.+.+.}, at: [<0000000000401372>] kernfs_fop_write+0x1b2/0x208
[ 134.018478] #2: (s_active#116){.+.+.+}, at: [<000000000040137e>] kernfs_fop_write+0x1be/0x208
[ 134.018496] #3: (rtnl_mutex){+.+.+.}, at: [<000003ff802c0f08>] store_bridge_parm+0x80/0xf8 [bridge]
[ 134.018517] #4: (&(&br->lock)->rlock){+.....}, at: [<000003ff802bc42c>] br_stp_set_enabled+0xbc/0x2b0 [bridge]
[ 134.018537] Last Breaking-Event-Address:
[ 134.018546] [<000003ff802bc4c0>] br_stp_set_enabled+0x150/0x2b0 [bridge]
[ 134.018551] ---[ end trace 0fc342e82de9b3d7 ]---
[ 134.018638] hello timer start done
In the system dump I observed that 3 cpus are within mod_timer (different
timers) and spin for some lock (one of them is the console driver which
explains the missing messages).
Using a different config with object debugging enabled I got this
interesting output:
[ 18.759850] virbr0: port 1(virbr0-nic) entered disabled state
[ 18.825885] ODEBUG: free active (active state 0) object type: timer_list hint: br_hello_timer_expired+0x0/0xb8 [bridge]
[ 18.826081] ------------[ cut here ]------------
[ 18.826085] WARNING: CPU: 1 PID: 519 at lib/debugobjects.c:289 debug_print_object+0xb0/0xd0
[ 18.826087] Modules linked in: bridge stp llc rng_core ghash_s390 prng [...]
[ 18.826118] CPU: 1 PID: 519 Comm: libvirtd Not tainted 4.12.0-rc3-00002-g475ef2f #359
[ 18.826120] Hardware name: IBM 2827 H66 705 (LPAR)
[ 18.826123] task: 000000006dca4100 task.stack: 000000006e7b0000
[ 18.826125] Krnl PSW : 0404d00180000000 00000000006420d0 (debug_print_object+0xb0/0xd0)
[ 18.826131] R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
[ 18.826135] Krnl GPRS: ffffffffffffffe9 0000000080000001 000000000000006b 0000000000a973f4
[ 18.826138] 0000000000292296 0000000000000000 0000000000a8cca2 0000000001e3bf18
[ 18.826140] 0000000001e3bf10 0000000069c4e2a8 0000000069c4c2a8 0000000000ab2f48
[ 18.826143] 0000000000cc6f18 000000006fce91a8 00000000006420cc 000000006e7b3ad0
[ 18.826152] Krnl Code: 00000000006420c0: c02000242a65 larl %r2,ac758a
00000000006420c6: c0e5ffe280c1 brasl %r14,292248
#00000000006420cc: a7f40001 brc 15,6420ce
>00000000006420d0: c41d0032960a lrl %r1,c94ce4
00000000006420d6: e340f0e80004 lg %r4,232(%r15)
00000000006420dc: a71a0001 ahi %r1,1
00000000006420e0: eb6ff0a80004 lmg %r6,%r15,168(%r15)
00000000006420e6: c41f003295ff strl %r1,c94ce4
[ 18.826177] Call Trace:
[ 18.826180] ([<00000000006420cc>] debug_print_object+0xac/0xd0)
[ 18.826183] [<00000000006431ba>] __debug_check_no_obj_freed+0xca/0x258
[ 18.826185] [<0000000000319a44>] kfree+0x264/0x410
[ 18.826188] [<00000000006a8e46>] device_release+0x76/0xb0
[ 18.826191] [<000000000060e67e>] kobject_put+0xde/0x1d8
[ 18.826194] [<00000000007bd14e>] netdev_run_todo+0x2be/0x2d0
[ 18.826201] [<000003ff8096b762>] br_del_bridge+0x82/0x98 [bridge]
[ 18.826208] [<000003ff8096d750>] br_ioctl_deviceless_stub+0x100/0x140 [bridge]
[ 18.826211] [<000000000078e562>] sock_ioctl+0x1a2/0x2f0
[ 18.826214] [<000000000035dc3c>] do_vfs_ioctl+0x714/0x7a8
[ 18.826217] [<000000000035dd4c>] SyS_ioctl+0x7c/0xb0
[ 18.826220] [<00000000008f2300>] system_call+0xc4/0x274
[ 18.826222] INFO: lockdep is turned off.
[ 18.826224] Last Breaking-Event-Address:
[ 18.826227] [<00000000006420cc>] debug_print_object+0xac/0xd0
[ 18.826230] ---[ end trace 765b1870ef16b23f ]---
Regards,
Sebastian
Powered by blists - more mailing lists