netdev - Re: [PATCH 6/6] net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170605182027.GB5235@lunn.ch>
Date:   Mon, 5 Jun 2017 20:20:27 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Russell King <rmk+kernel@...linux.org.uk>
Cc:     Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org
Subject: Re: [PATCH 6/6] net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY
 support

On Mon, Jun 05, 2017 at 12:23:16PM +0100, Russell King wrote:
> Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310).
> This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only
> supports Clause 45 accesses.
> 
> The PHY appears (based on the vendor IDs) to be two different vendors
> IP, with each devad containing several instances.
> 
> This PHY driver has only been tested with the RJ45 copper port, fiber
> port and a Marvell Armada 8040-based ethernet interface.
> 
> It should be noted that to use the full range of speeds, MAC drivers
> need to also reconfigure the link mode as per phydev->interface, since
> the PHY automatically changes its interface mode depending on the
> negotiated speed.
> 
> Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>

Reviewed-by: Andrew Lunn <andrew@...n.ch>

    Andrew