| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170607000317.14729-6-f.fainelli@gmail.com>
Date: Tue, 6 Jun 2017 17:03:17 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: andrew@...n.ch, vivien.didelot@...oirfairelinux.com,
john@...ozen.org, davem@...emloft.net,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next v2 5/5] net: dsa: Stop accessing ds->dst->cpu_dp in drivers
Out of the few drivers that do access ds->dst->cpu_dp, there is only a
handful for which we cannot substitute that for either an existing and
equivalent piece of information (b53, bcm_sf2, qca8k), and there is only
one for which we need to introduce a helper: mt7530. We do introduce
dsa_ds_get_cpu_dp() which reads the CPU port from ds->cpu_port_mask.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/dsa/b53/b53_common.c | 4 ++--
drivers/net/dsa/bcm_sf2.c | 10 ++++++----
drivers/net/dsa/mt7530.c | 4 +++-
drivers/net/dsa/mv88e6060.c | 2 +-
drivers/net/dsa/qca8k.c | 2 +-
include/net/dsa.h | 6 ++++++
net/dsa/dsa2.c | 11 +++++++++++
net/dsa/legacy.c | 1 +
net/dsa/slave.c | 1 -
9 files changed, 31 insertions(+), 10 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index e68d368e20ac..faec6fcacd31 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1341,7 +1341,7 @@ EXPORT_SYMBOL(b53_fdb_dump);
int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
{
struct b53_device *dev = ds->priv;
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = dev->cpu_port;
u16 pvlan, reg;
unsigned int i;
@@ -1387,7 +1387,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
{
struct b53_device *dev = ds->priv;
struct b53_vlan *vl = &dev->vlans[0];
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = dev->cpu_port;
unsigned int i;
u16 pvlan, reg, pvid;
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 76e98e8ed315..9744100d0276 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -227,7 +227,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = priv->dev->cpu_port;
unsigned int i;
u32 reg;
@@ -806,8 +806,9 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = ds->dst[ds->index].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ struct dsa_port *cpu_dp = ds->ports[port].cpu_dp;
+ struct net_device *p = cpu_dp->netdev;
struct ethtool_wolinfo pwol;
/* Get the parent device WoL settings */
@@ -829,9 +830,10 @@ static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = ds->dst[ds->index].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- s8 cpu_port = ds->dst->cpu_dp->index;
+ struct dsa_port *cpu_dp = ds->ports[port].cpu_dp;
+ struct net_device *p = cpu_dp->netdev;
+ s8 cpu_port = cpu_dp->index;
struct ethtool_wolinfo pwol;
p->ethtool_ops->get_wol(p, &pwol);
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 1e46418a3b74..9b1b76c7b927 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -907,6 +907,7 @@ static int
mt7530_setup(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
+ struct dsa_port *cpu_dp;
int ret, i;
u32 id, val;
struct device_node *dn;
@@ -916,7 +917,8 @@ mt7530_setup(struct dsa_switch *ds)
* controller also is the container for two GMACs nodes representing
* as two netdev instances.
*/
- dn = ds->dst->cpu_dp->netdev->dev.of_node->parent;
+ cpu_dp = dsa_ds_get_cpu_dp(ds);
+ dn = cpu_dp->netdev->dev.of_node->parent;
priv->ethernet = syscon_node_to_regmap(dn);
if (IS_ERR(priv->ethernet))
return PTR_ERR(priv->ethernet);
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index dce7fa57eb55..621cdc46ad81 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -176,7 +176,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
(dsa_is_cpu_port(ds, p) ?
ds->enabled_port_mask :
- BIT(ds->dst->cpu_dp->index)));
+ BIT(ds->ports[p].cpu_dp->index)));
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index b3bee7eab45f..68b45298f6d1 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -506,7 +506,7 @@ qca8k_setup(struct dsa_switch *ds)
pr_warn("regmap initialization failed");
/* Initialize CPU port pad mode (xMII type, delays...) */
- phy_mode = of_get_phy_mode(ds->dst->cpu_dp->dn);
+ phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
if (phy_mode < 0) {
pr_err("Can't find phy-mode for master device\n");
return phy_mode;
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 58969b9a090c..264cb3f93764 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -11,6 +11,7 @@
#ifndef __LINUX_NET_DSA_H
#define __LINUX_NET_DSA_H
+#include <linux/bitops.h>
#include <linux/if.h>
#include <linux/if_ether.h>
#include <linux/list.h>
@@ -261,6 +262,11 @@ static inline bool dsa_is_port_initialized(struct dsa_switch *ds, int p)
return ds->enabled_port_mask & (1 << p) && ds->ports[p].netdev;
}
+static inline struct dsa_port *dsa_ds_get_cpu_dp(struct dsa_switch *ds)
+{
+ return &ds->ports[fls(ds->cpu_port_mask) - 1];
+}
+
static inline u8 dsa_upstream_port(struct dsa_switch *ds)
{
struct dsa_switch_tree *dst = ds->dst;
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 2674bdf03fef..3878dcd081bb 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -488,6 +488,8 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
enum dsa_tag_protocol tag_protocol;
struct net_device *ethernet_dev;
struct device_node *ethernet;
+ struct dsa_port *p;
+ unsigned int i;
if (port->dn) {
ethernet = of_parse_phandle(port->dn, "ethernet", 0);
@@ -505,6 +507,15 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
if (!dst->cpu_dp) {
dst->cpu_dp = port;
dst->cpu_dp->netdev = ethernet_dev;
+
+ for (i = 0; i < ds->num_ports; i++) {
+ p = &ds->ports[i];
+ if (!dsa_port_is_valid(p) ||
+ i == index)
+ continue;
+
+ p->cpu_dp = port;
+ }
}
tag_protocol = ds->ops->get_tag_protocol(ds);
diff --git a/net/dsa/legacy.c b/net/dsa/legacy.c
index 443ebf3b5e5b..217034cb25cd 100644
--- a/net/dsa/legacy.c
+++ b/net/dsa/legacy.c
@@ -129,6 +129,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
ds->dsa_port_mask |= 1 << i;
} else {
ds->enabled_port_mask |= 1 << i;
+ ds->ports[i].cpu_dp = dst->cpu_dp;
}
valid_name_found = true;
}
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index a73c1de398b5..46fd4a985e0a 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1179,7 +1179,6 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
p->old_duplex = -1;
ds->ports[port].netdev = slave_dev;
- p->dp->cpu_dp = cpu_dp;
ret = register_netdev(slave_dev);
if (ret) {
netdev_err(master, "error %d registering interface %s\n",
--
2.9.3
Powered by blists - more mailing lists