netdev - [RFC PATCH net-next v2 04/15] bpf: Sample bpf program to set SYN/SYN-ACK RTOs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170615200844.2752485-5-brakmo@fb.com>
Date:   Thu, 15 Jun 2017 13:08:33 -0700
From:   Lawrence Brakmo <brakmo@...com>
To:     netdev <netdev@...r.kernel.org>
CC:     Kernel Team <kernel-team@...com>, Blake Matheny <bmatheny@...com>,
        Alexei Starovoitov <ast@...com>,
        Daniel Borkmann <daniel@...earbox.net>,
        David Ahern <dsa@...ulusnetworks.com>
Subject: [RFC PATCH net-next v2 04/15] bpf: Sample bpf program to set SYN/SYN-ACK RTOs

The sample BPF program, tcp_synrto_kern.c, sets the SYN and SYN-ACK
RTOs to 10ms when both hosts are within the same datacenter (i.e.
small RTTs) in an environment where common IPv6 prefixes indicate
both hosts are in the same data center.

Signed-off-by: Lawrence Brakmo <brakmo@...com>
---
 samples/bpf/Makefile          |  1 +
 samples/bpf/tcp_synrto_kern.c | 54 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 samples/bpf/tcp_synrto_kern.c

diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index ed6bc75..21cb016 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -113,6 +113,7 @@ always += lwt_len_hist_kern.o
 always += xdp_tx_iptunnel_kern.o
 always += test_map_in_map_kern.o
 always += cookie_uid_helper_example.o
+always += tcp_synrto_kern.o
 
 HOSTCFLAGS += -I$(objtree)/usr/include
 HOSTCFLAGS += -I$(srctree)/tools/lib/
diff --git a/samples/bpf/tcp_synrto_kern.c b/samples/bpf/tcp_synrto_kern.c
new file mode 100644
index 0000000..03579cb
--- /dev/null
+++ b/samples/bpf/tcp_synrto_kern.c
@@ -0,0 +1,54 @@
+/*
+ * BPF program to set SYN and SYN-ACK RTOs to 10ms when using IPv6 addresses
+ * and the first 5.5 bytes of the IPv6 addresses are the same (in this example
+ * that means both hosts are in the same datacenter.
+ */
+
+#include <uapi/linux/bpf.h>
+#include <uapi/linux/if_ether.h>
+#include <uapi/linux/if_packet.h>
+#include <uapi/linux/ip.h>
+#include <linux/socket.h>
+#include "bpf_helpers.h"
+
+#define DEBUG 1
+
+SEC("sockops")
+int bpf_synrto(struct bpf_socket_ops *skops)
+{
+	char fmt1[] = "BPF command: %d\n";
+	char fmt2[] = "  Returning %d\n";
+	int rv = -1;
+	int op;
+
+	/* For testing purposes, only execute rest of BPF program
+	 * if neither port numberis 55601
+	 */
+	if (skops->remote_port != 55601 && skops->local_port != 55601)
+		return -1;
+
+	op = (int) skops->op;
+
+#ifdef DEBUG
+	bpf_trace_printk(fmt1, sizeof(fmt1), op);
+#endif
+
+	/* Check for TIMEOUT_INIT operation and IPv6 addresses */
+	if (op == BPF_SOCKET_OPS_TIMEOUT_INIT &&
+		skops->family == AF_INET6) {
+
+		/* If the first 5.5 bytes of the IPv6 address are the same
+		 * then both hosts are in the same datacenter
+		 * so use an RTO of 10ms
+		 */
+		if (skops->local_ip6[0] == skops->remote_ip6[0] &&
+		    (skops->local_ip6[1] & 0xfff00000) ==
+		    (skops->remote_ip6[1] & 0xfff00000))
+			rv = 10;
+	}
+#ifdef DEBUG
+	bpf_trace_printk(fmt2, sizeof(fmt2), rv);
+#endif
+	return rv;
+}
+char _license[] SEC("license") = "GPL";
-- 
2.9.3