netdev - Re: [PATCH NET] net/hns:bugfix of ethtool -t phy self

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f526345d-b0a4-1c45-8472-81c6c548950c@huawei.com>
Date:   Tue, 20 Jun 2017 11:18:48 +0800
From:   l00371289 <linyunsheng@...wei.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>
CC:     <davem@...emloft.net>, <huangdaode@...ilicon.com>,
        <xuwei5@...ilicon.com>, <liguozhu@...ilicon.com>,
        <Yisen.Zhuang@...wei.com>, <gabriele.paoloni@...wei.com>,
        <john.garry@...wei.com>, <linuxarm@...wei.com>,
        <salil.mehta@...wei.com>, <lipeng321@...wei.com>,
        <yankejian@...wei.com>, <tremyfr@...il.com>,
        <xieqianqian@...wei.com>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH NET] net/hns:bugfix of ethtool -t phy self_test

Hi, Andrew

On 2017/6/20 5:54, Andrew Lunn wrote:
> On Mon, Jun 19, 2017 at 02:00:43PM -0700, Florian Fainelli wrote:
>> On 06/16/2017 02:24 AM, Lin Yun Sheng wrote:
>>> This patch fixes the phy loopback self_test failed issue. when
>>> Marvell Phy Module is loaded, it will powerdown fiber when doing
>>> phy loopback self test, which cause phy loopback self_test fail.
>>>
>>> Signed-off-by: Lin Yun Sheng <linyunsheng@...wei.com>
>>> ---
>>>  drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 ++++++++++++++--
>>>  1 file changed, 14 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
>>> index b8fab14..e95795b 100644
>>> --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
>>> +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
>>> @@ -288,9 +288,15 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
>>
>> The question really is, why is not this properly integrated into the PHY
>> driver and PHYLIB such that the only thing the Ethernet MAC driver has
>> to call is a function of the PHY driver putting it in self-test?
> 
> This whole driver pokes various PHY registers, rather than use
> phylib. And it does so without taking the PHY lock. 
I will consider using phylib as much as possible, thanks.

It also assumes it
> is a Marvell PHY and i don't see anywhere it actually verifies this.
When it said Marvell Phy , I meant Marvell Phy with fibre support.
I will send anther patch to only setting bit in Fiber Control when
it is a Marvell Phy with fibre support.

Thanks for reply.
Best Regards
Yunsheng Lin
> 
> This is all broken.
> 
>      Andrew
> 
> .
>