netdev - [net-next 06/15] i40e: comment that udp

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170621011802.81768-7-jeffrey.t.kirsher@intel.com>
Date:   Tue, 20 Jun 2017 18:17:53 -0700
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Jacob Keller <jacob.e.keller@...el.com>, netdev@...r.kernel.org,
        nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 06/15] i40e: comment that udp_port must be in host byte order

From: Jacob Keller <jacob.e.keller@...el.com>

The firmware expects the port number passed when setting up
the UDP tunnel configuration to be in Little Endian format.
The i40e_aq_add_udp_tunnel command byte swaps the value from
host order to Little Endian.

Since commit fe0b0cd97b4f ("i40e: send correct port number to
AdminQ when enabling UDP tunnels") we've correctly
sent the value in host order.

Let's also add a comment to the function explaining that it must
be in host order, as the port numbers are commonly stored as Big
Endian values.

Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index cbad4eba7ae7..8e082a946411 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -3614,11 +3614,15 @@ i40e_status i40e_aq_get_cee_dcb_config(struct i40e_hw *hw,
 /**
  * i40e_aq_add_udp_tunnel
  * @hw: pointer to the hw struct
- * @udp_port: the UDP port to add
+ * @udp_port: the UDP port to add in Host byte order
  * @header_len: length of the tunneling header length in DWords
  * @protocol_index: protocol index type
  * @filter_index: pointer to filter index
  * @cmd_details: pointer to command details structure or NULL
+ *
+ * Note: Firmware expects the udp_port value to be in Little Endian format,
+ * and this function will call cpu_to_le16 to convert from Host byte order to
+ * Little Endian order.
  **/
 i40e_status i40e_aq_add_udp_tunnel(struct i40e_hw *hw,
 				u16 udp_port, u8 protocol_index,
-- 
2.12.2