| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1498815856-43402-3-git-send-email-linyunsheng@huawei.com>
Date: Fri, 30 Jun 2017 17:44:16 +0800
From: Lin Yun Sheng <linyunsheng@...wei.com>
To: <davem@...emloft.net>, <andrew@...n.ch>, <f.fainelli@...il.com>
CC: <huangdaode@...ilicon.com>, <xuwei5@...ilicon.com>,
<liguozhu@...ilicon.com>, <Yisen.Zhuang@...wei.com>,
<gabriele.paoloni@...wei.com>, <john.garry@...wei.com>,
<linuxarm@...wei.com>, <yisen.zhuang@...wei.com>,
<salil.mehta@...wei.com>, <lipeng321@...wei.com>,
<tremyfr@...il.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH net-next v8 2/2] net: hns: Use phy_driver to setup Phy loopback
Use function set_loopback in phy_driver to setup phy loopback
when doing ethtool self test.
Signed-off-by: Lin Yun Sheng <linyunsheng@...wei.com>
---
drivers/net/ethernet/hisilicon/hns/hnae.h | 1 +
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 105 ++++++++---------------
2 files changed, 35 insertions(+), 71 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.h b/drivers/net/ethernet/hisilicon/hns/hnae.h
index 04211ac..7ba653a 100644
--- a/drivers/net/ethernet/hisilicon/hns/hnae.h
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.h
@@ -360,6 +360,7 @@ enum hnae_loop {
MAC_INTERNALLOOP_MAC = 0,
MAC_INTERNALLOOP_SERDES,
MAC_INTERNALLOOP_PHY,
+ MAC_LOOP_PHY_NONE,
MAC_LOOP_NONE,
};
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index 00e57bb..a8db27e 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -259,67 +259,27 @@ static int hns_nic_set_link_ksettings(struct net_device *net_dev,
static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
{
-#define COPPER_CONTROL_REG 0
-#define PHY_POWER_DOWN BIT(11)
-#define PHY_LOOP_BACK BIT(14)
- u16 val = 0;
-
- if (phy_dev->is_c45) /* c45 branch adding for XGE PHY */
- return -ENOTSUPP;
+ int err;
if (en) {
- /* speed : 1000M */
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 2);
- phy_write(phy_dev, 21, 0x1046);
-
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
- /* Force Master */
- phy_write(phy_dev, 9, 0x1F00);
-
- /* Soft-reset */
- phy_write(phy_dev, 0, 0x9140);
- /* If autoneg disabled,two soft-reset operations */
- phy_write(phy_dev, 0, 0x9140);
-
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
-
- /* Default is 0x0400 */
- phy_write(phy_dev, 1, 0x418);
-
- /* Force 1000M Link, Default is 0x0200 */
- phy_write(phy_dev, 7, 0x20C);
-
- /* Powerup Fiber */
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
- val = phy_read(phy_dev, COPPER_CONTROL_REG);
- val &= ~PHY_POWER_DOWN;
- phy_write(phy_dev, COPPER_CONTROL_REG, val);
-
- /* Enable Phy Loopback */
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
- val = phy_read(phy_dev, COPPER_CONTROL_REG);
- val |= PHY_LOOP_BACK;
- val &= ~PHY_POWER_DOWN;
- phy_write(phy_dev, COPPER_CONTROL_REG, val);
+ /* Doing phy loopback in offline state, phy resuming is
+ * needed to power up the device.
+ */
+ err = phy_resume(phy_dev);
+ if (err)
+ goto out;
+
+ err = phy_loopback(phy_dev, true);
} else {
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
- phy_write(phy_dev, 1, 0x400);
- phy_write(phy_dev, 7, 0x200);
-
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
- val = phy_read(phy_dev, COPPER_CONTROL_REG);
- val |= PHY_POWER_DOWN;
- phy_write(phy_dev, COPPER_CONTROL_REG, val);
-
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
- phy_write(phy_dev, 9, 0xF00);
-
- val = phy_read(phy_dev, COPPER_CONTROL_REG);
- val &= ~PHY_LOOP_BACK;
- val |= PHY_POWER_DOWN;
- phy_write(phy_dev, COPPER_CONTROL_REG, val);
+ err = phy_loopback(phy_dev, false);
+ if (err)
+ goto out;
+
+ err = phy_suspend(phy_dev);
}
- return 0;
+
+out:
+ return err;
}
static int __lb_setup(struct net_device *ndev,
@@ -332,10 +292,9 @@ static int __lb_setup(struct net_device *ndev,
switch (loop) {
case MAC_INTERNALLOOP_PHY:
- if ((phy_dev) && (!phy_dev->is_c45)) {
- ret = hns_nic_config_phy_loopback(phy_dev, 0x1);
- ret |= h->dev->ops->set_loopback(h, loop, 0x1);
- }
+ ret = hns_nic_config_phy_loopback(phy_dev, 0x1);
+ if (!ret)
+ ret = h->dev->ops->set_loopback(h, loop, 0x1);
break;
case MAC_INTERNALLOOP_MAC:
if ((h->dev->ops->set_loopback) &&
@@ -346,17 +305,17 @@ static int __lb_setup(struct net_device *ndev,
if (h->dev->ops->set_loopback)
ret = h->dev->ops->set_loopback(h, loop, 0x1);
break;
+ case MAC_LOOP_PHY_NONE:
+ ret = hns_nic_config_phy_loopback(phy_dev, 0x0);
case MAC_LOOP_NONE:
- if ((phy_dev) && (!phy_dev->is_c45))
- ret |= hns_nic_config_phy_loopback(phy_dev, 0x0);
-
- if (h->dev->ops->set_loopback) {
+ if (!ret && h->dev->ops->set_loopback) {
if (priv->ae_handle->phy_if != PHY_INTERFACE_MODE_XGMII)
- ret |= h->dev->ops->set_loopback(h,
+ ret = h->dev->ops->set_loopback(h,
MAC_INTERNALLOOP_MAC, 0x0);
- ret |= h->dev->ops->set_loopback(h,
- MAC_INTERNALLOOP_SERDES, 0x0);
+ if (!ret)
+ ret = h->dev->ops->set_loopback(h,
+ MAC_INTERNALLOOP_SERDES, 0x0);
}
break;
default:
@@ -582,13 +541,16 @@ static int __lb_run_test(struct net_device *ndev,
return ret_val;
}
-static int __lb_down(struct net_device *ndev)
+static int __lb_down(struct net_device *ndev, enum hnae_loop loop)
{
struct hns_nic_priv *priv = netdev_priv(ndev);
struct hnae_handle *h = priv->ae_handle;
int ret;
- ret = __lb_setup(ndev, MAC_LOOP_NONE);
+ if (loop == MAC_INTERNALLOOP_PHY)
+ ret = __lb_setup(ndev, MAC_LOOP_PHY_NONE);
+ else
+ ret = __lb_setup(ndev, MAC_LOOP_NONE);
if (ret)
netdev_err(ndev, "%s: __lb_setup return error(%d)!\n",
__func__,
@@ -644,7 +606,8 @@ static void hns_nic_self_test(struct net_device *ndev,
if (!data[test_index]) {
data[test_index] = __lb_run_test(
ndev, (enum hnae_loop)st_param[i][0]);
- (void)__lb_down(ndev);
+ (void)__lb_down(ndev,
+ (enum hnae_loop)st_param[i][0]);
}
if (data[test_index])
--
1.9.1
Powered by blists - more mailing lists