netdev - Re: [PATCH net-next 2/4] net-next: mediatek: add platform data to adapt into various hardware

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1500083261.16278.40.camel@mtkswgap22>
Date:   Sat, 15 Jul 2017 09:47:41 +0800
From:   Sean Wang <sean.wang@...iatek.com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     <john@...ozen.org>, <davem@...emloft.net>, <nbd@...nwrt.org>,
        <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH net-next 2/4] net-next: mediatek: add platform data to
 adapt into various hardware

On Wed, 2017-07-12 at 16:50 +0200, Andrew Lunn wrote:
> > +static int mtk_clk_enable(struct mtk_eth *eth)
> > +{
> > +	int clk, ret;
> > +
> > +	for (clk = 0; clk < MTK_CLK_MAX ; clk++) {
> > +		if (eth->clks[clk]) {
> > +			ret = clk_prepare_enable(eth->clks[clk]);
> > +			if (ret)
> > +				goto err_disable_clks;
> > +		}
> > +	}
> > +
> > +	return 0;
> > +
> > +err_disable_clks:
> > +	while (--clk >= 0) {
> > +		if (eth->clks[clk])
> > +			clk_disable_unprepare(eth->clks[clk]);
> > +	}
> > +
> > +	return ret;
> > +}
> 
> > +
> >  static int mtk_hw_init(struct mtk_eth *eth)
> >  {
> >  	int i, val;
> > @@ -1847,10 +1881,8 @@ static int mtk_hw_init(struct mtk_eth *eth)
> >  	pm_runtime_enable(eth->dev);
> >  	pm_runtime_get_sync(eth->dev);
> >  
> > -	clk_prepare_enable(eth->clks[MTK_CLK_ETHIF]);
> > -	clk_prepare_enable(eth->clks[MTK_CLK_ESW]);
> > -	clk_prepare_enable(eth->clks[MTK_CLK_GP1]);
> > -	clk_prepare_enable(eth->clks[MTK_CLK_GP2]);
> > +	mtk_clk_enable(eth);
> > +
> 
> mtk_clk_enable() returns an error code. It is probably a good idea to
> use it, especially if it could be EPRODE_DEFER.

okay, I will improve those clocks handling better along with Florian's
suggestion in the next version

	Sean












> 
>     Andrew