netdev - [PATCH] NET: dwmac: Make dwmac reset unconditional

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170718140715.25798-1-Eugeniy.Paltsev@synopsys.com>
Date:   Tue, 18 Jul 2017 17:07:15 +0300
From:   Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
To:     netdev@...r.kernel.org
Cc:     linux-snps-arc@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Alexandre Torgue <alexandre.torgue@...com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Subject: [PATCH] NET: dwmac: Make dwmac reset unconditional

Unconditional reset dwmac before HW init if reset controller is present.

In existing implementation we reset dwmac only after second module
probing:
(module load -> unload -> load again [reset happens])

Now we reset dwmac at every module load:
(module load [reset happens] -> unload -> load again [reset happens])

Also some reset controllers have only reset callback instead of
assert + deassert callbacks pair, so handle this case.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 12236da..c7b3d0d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4096,8 +4096,15 @@ int stmmac_dvr_probe(struct device *device,
 	if ((phyaddr >= 0) && (phyaddr <= 31))
 		priv->plat->phy_addr = phyaddr;
 
-	if (priv->plat->stmmac_rst)
+	if (priv->plat->stmmac_rst) {
+		ret = reset_control_assert(priv->plat->stmmac_rst);
 		reset_control_deassert(priv->plat->stmmac_rst);
+		/* Some reset controllers have only reset callback instead of
+		 * assert + deassert callbacks pair.
+		 */
+		if (ret == -ENOTSUPP)
+			reset_control_reset(priv->plat->stmmac_rst);
+	}
 
 	/* Init MAC and get the capabilities */
 	ret = stmmac_hw_init(priv);
-- 
2.9.3