[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1501097259.2401.33.camel@baylibre.com>
Date: Wed, 26 Jul 2017 21:27:39 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: crow <crow@...ux.org.ba>, Andrew Lunn <andrew@...n.ch>
Cc: netdev@...r.kernel.org, linux-amlogic@...ts.infradead.org
Subject: Re: ARM GLX Khadas VIM Pro - Ethernet detected as only 10Mbps and
stalled after some traffic
On Sun, 2017-06-11 at 08:31 +0200, crow wrote:
> Hi Andrew,
>
> On Sat, Jun 10, 2017 at 5:27 PM, Andrew Lunn <andrew@...n.ch> wrote:
> > > Also what Martin Blumenstingl wrote is following which is also crucial
> > > for fixing the issue:
> > > Amlogic has given their ethernet PHY driver some updates [2], it now
> > > includes wake-on-lan, and they now have an internal_phy_read_status
> > > which uses reset_internal_phy if there's a link and some error counter
> > > exceeds some magic value.
> >
> > Hi Crow
> >
> > You could probably just drop the Amlogic driver into mainline and see
> > if it works better. If that solves your problem, we can look at
> > merging the changes.
> >
> > Andrew
>
> Thank your for the suggestion, and thanks Martin to explaining me over
> IRC what actually I should do.
>
> I recompiled mainline kernel 4.12-rc4 with the Amlogic driver:
> replaced drivers/net/phy/meson-gxl.c with
> https://github.com/khadas/linux/blob/ubuntu-4.9/drivers/amlogic/ethernet/phy/a
> mlogic.c
>
> But this did not solve the issue. As soon as i start git clone i lose
> network connection to device (no session timeout/disconnect this time,
> but I am unable to reconnect over SSH or to get OK ping replay back).
>
> Here are the tests:
> Linux khadasvimpro 4.12.0-rc4-4-ARCH #1 SMP Sun Jun 11 03:39:21 CEST
> 2017 aarch64 GNU/Linux
>
> # modinfo meson_gxl
> filename:
> /lib/modules/4.12.0-rc4-4-ARCH/kernel/drivers/net/phy/meson-gxl.ko.gz
> license: GPL
> author: Neil Armstrong <narmstrong@...libre.com>
> author: Baoqi wang
> description: Amlogic Meson GXL Internal PHY driver
> alias: mdio:0000000110000001010001000000????
> depends:
> intree: Y
> vermagic: 4.12.0-rc4-4-ARCH SMP mod_unload aarch64
> #
> # mii-tool -vvv eth0
> Using SIOCGMIIPHY=0x8947
> eth0: negotiated 1000baseT-HD flow-control, link ok
Hum, 1000Mbps Half duplex looks duplex looks suspicious
The PHY is supposed to be a 10/100, right ? or did I miss something ?
> registers for MII PHY 8:
> 1000 782d 0181 4400 01e1 c1e1 000f 2001
> ffff ffff ffff ffff ffff ffff ffff ffff
> 0040 0002 40e8 5400 1c1c 0000 0000 aaaa
> fff0 ffff 0000 040a 1407 004a 0000 105a
> product info: vendor 00:60:51, model 0 rev 0
> basic mode: autonegotiation enabled
> basic status: autonegotiation complete, link ok
> capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
> 10baseT-FD 10baseT-HD
> advertising: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
> 10baseT-FD 10baseT-HD
> link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
> 10baseT-FD 10baseT-HD
> $
>
> over SSH startet following but it stall already at 0%:
>
> $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-
> stable.git
> Cloning into 'linux-stable'...
> remote: Counting objects: 5948690, done.
> remote: Compressing objects: 100% (124799/124799), done.
> Receiving objects: 0% (11668/5948690), 2.27 MiB | 4.52 MiB/s
>
> shows timeout while trying to sync with NTP server:
>
> # journalctl -f
> systemd-timesyncd[299]: Timed out waiting for reply from
> 83.68.137.76:123 (2.at.pool.ntp.org).
> systemd-timesyncd[299]: Timed out waiting for reply from
> 86.59.113.114:123 (2.at.pool.ntp.org).
>
> while still not working dump the register:
> # mii-tool -vvv eth0
> Using SIOCGMIIPHY=0x8947
> eth0: negotiated 1000baseT-HD flow-control, link ok
> registers for MII PHY 8:
> 1000 782d 0181 4400 01e1 c1e1 000d 2001
> ffff ffff ffff ffff ffff ffff ffff ffff
> 0040 0002 40e8 5400 1c1c 0000 0000 aaaa
> fff0 ffff 0000 040a 1407 0000 0000 105a
> product info: vendor 00:60:51, model 0 rev 0
> basic mode: autonegotiation enabled
> basic status: autonegotiation complete, link ok
> capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
> 10baseT-FD 10baseT-HD
> advertising: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
> 10baseT-FD 10baseT-HD
> link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
> 10baseT-FD 10baseT-HD
> #
>
> # ifconfig eth0 down && ifconfig eth0 up
> # dmesg -T | tail -n 10
> [Sun Jun 11 07:40:34 2017] meson8b-dwmac c9410000.ethernet eth0:
> device MAC address 00:15:18:01:81:31
> [Sun Jun 11 07:40:34 2017] random: crng init done
> [Sun Jun 11 07:40:34 2017] Meson GXL Internal PHY 0.e40908ff:08:
> attached PHY driver [Meson GXL Internal PHY]
> (mii_bus:phy_addr=0.e40908ff:08, irq=-1)
> [Sun Jun 11 07:40:34 2017] meson8b-dwmac c9410000.ethernet eth0: PTP
> not supported by HW
> [Sun Jun 11 07:40:36 2017] brcmfmac: brcmf_c_preinit_dcmds: Firmware
> version = wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID
> 01-6a2c8ad4
> [Sun Jun 11 07:40:36 2017] meson8b-dwmac c9410000.ethernet eth0: Link
> is Up - 100Mbps/Full - flow control off
> [Sun Jun 11 07:41:23 2017] EXT4-fs (mmcblk1p1): mounted filesystem
> with ordered data mode. Opts: (null)
> [Sun Jun 11 07:54:28 2017] Meson GXL Internal PHY 0.e40908ff:08:
> attached PHY driver [Meson GXL Internal PHY]
> (mii_bus:phy_addr=0.e40908ff:08, irq=-1)
> [Sun Jun 11 07:54:28 2017] meson8b-dwmac c9410000.ethernet eth0: PTP
> not supported by HW
> [Sun Jun 11 07:54:30 2017] meson8b-dwmac c9410000.ethernet eth0: Link
> is Up - 100Mbps/Full - flow control off
> #
>
> then I took eth0 and wlan0 up (same ArchLinuxArm with same mainline
> kernel same place where the files are stored eMMC) and this was
> working so it should not be the ArchLinuxArm which makes problem, and
> did same git clone as with custom Amlogic kernel (3.1.4 and 4.9.26
> under Khadas Ubuntu image) and test was successfully:
>
> $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-
> stable.git
> Cloning into 'linux-stable'...
> remote: Counting objects: 5948690, done.
> remote: Compressing objects: 100% (124799/124799), done.
> remote: Total 5948690 (delta 427756), reused 549521 (delta 425675)
> Receiving objects: 100% (5948690/5948690), 1.21 GiB | 4.94 MiB/s, done.
> Resolving deltas: 100% (4961965/4961965), done.
> Checking out files: 100% (59844/59844), done.
> $
>
> Regards,
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
Powered by blists - more mailing lists