[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPv3WKeC4Ry+cR5FMh5BGgp=+UdzkxRf6=EqKBmWMNQtb+YLdg@mail.gmail.com>
Date: Wed, 26 Jul 2017 08:18:18 +0200
From: Marcin Wojtas <mw@...ihalf.com>
To: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Cc: netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
Russell King <linux@....linux.org.uk>,
Antoine Tenart <antoine.tenart@...e-electrons.com>,
Miquèl Raynal <miquel.raynal@...e-electrons.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Gregory Clement <gregory.clement@...e-electrons.com>,
Nadav Haklai <nadavh@...vell.com>,
Hanna Hawa <hannah@...vell.com>,
Yehuda Yitschak <yehuday@...vell.com>,
Stefan Chulski <stefanc@...vell.com>
Subject: Re: [PATCH 0/8] net: mvpp2: add TX interrupts support
Hi Thomas,
I tested patchset on A8040-DB, everything seems fine.
Best regards,
Marcin
2017-07-25 17:55 GMT+02:00 Thomas Petazzoni
<thomas.petazzoni@...e-electrons.com>:
> Hello,
>
> So far, the mvpp2 driver was using an hrtimer to handle TX
> completion. This patch series adds support for using TX interrupts
> (for each CPU) on PPv2.2, the variant of the IP used on Marvell Armada
> 7K/8K.
>
> This series has been tested on Marvell Armada 7K (PPv2.2) and Armada
> 375 (PPv2.1).
>
> Dave:
>
> - This series depends on the previous series sent by Antoine Ténart
> "net: mvpp2: MAC/GoP configuration and optional PHYs". Functionally
> speaking there is no real dependency, but we touch in a few areas
> the same piece of code, so I based my patch series on top of
> Antoine's.
>
> - Please do not apply the last patch of this series "arm64: dts:
> marvell: add TX interrupts for PPv2.2", it will be taken by the ARM
> mvebu maintainers.
>
> Thanks!
>
> Thomas
>
> Thomas Petazzoni (8):
> net: mvpp2: fix MVPP21_ISR_RXQ_GROUP_REG definition
> net: mvpp2: remove RX queue group reset code
> net: mvpp2: introduce per-port nrxqs/ntxqs variables
> net: mvpp2: move from cpu-centric naming to "software thread" naming
> net: mvpp2: introduce queue_vector concept
> net: mvpp2: add support for TX interrupts and RX queue distribution
> modes
> dt-bindings: net: marvell-pp2: update interrupt-names with TX
> interrupts
> arm64: dts: marvell: add TX interrupts for PPv2.2
>
> .../devicetree/bindings/net/marvell-pp2.txt | 33 +-
> .../boot/dts/marvell/armada-cp110-master.dtsi | 21 +-
> .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 21 +-
> drivers/net/ethernet/marvell/mvpp2.c | 638 +++++++++++++++------
> 4 files changed, 534 insertions(+), 179 deletions(-)
>
> --
> 2.9.4
>
Powered by blists - more mailing lists