lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170727153713.GG18666@lunn.ch>
Date:   Thu, 27 Jul 2017 17:37:13 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     "Brown, Aaron F" <aaron.f.brown@...el.com>
Cc:     "John W. Linville" <linville@...driver.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "intel-wired-lan@...ts.osuosl.org" <intel-wired-lan@...ts.osuosl.org>
Subject: Re: [Intel-wired-lan] [PATCH] igb: support BCM54616 PHY

On Thu, Jul 27, 2017 at 12:40:01AM +0000, Brown, Aaron F wrote:
> > From: Intel-wired-lan [mailto:intel-wired-lan-bounces@...osl.org] On Behalf
> > Of John W. Linville
> > Sent: Friday, July 21, 2017 11:12 AM
> > To: netdev@...r.kernel.org
> > Cc: intel-wired-lan@...ts.osuosl.org; John W. Linville
> > <linville@...driver.com>
> > Subject: [Intel-wired-lan] [PATCH] igb: support BCM54616 PHY
> > 
> > The management port on an Edgecore AS7712-32 switch uses an igb MAC,
> > but
> > it uses a BCM54616 PHY. Without a patch like this, loading the igb
> > module produces dmesg output like this:
> > 
> > [    3.439125] igb: Copyright (c) 2007-2014 Intel Corporation.
> > [    3.439866] igb: probe of 0000:00:14.0 failed with error -2
> > 
> > Signed-off-by: John W. Linville <linville@...driver.com>
> > Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
> > ---
> >  drivers/net/ethernet/intel/igb/e1000_82575.c   | 6 ++++++
> >  drivers/net/ethernet/intel/igb/e1000_defines.h | 1 +
> >  drivers/net/ethernet/intel/igb/e1000_hw.h      | 1 +
> >  3 files changed, 8 insertions(+)
> 
> I do not have the specific hardware (Edgecore switch) but as far as regression tests go this works fine.
> Tested-by: Aaron Brown <aaron.f.brown@...el.com>

Sorry, missed the initial post, so replying to a reply.

Linux has supported the BCM54616 PHY since April 2015. If the Intel
drivers used the Linux PHY drivers, you would not of had this problem.

It would be good if somebody spent the time to migrate these MAC
drivers to use the common Linux PHY infrastructure.

	Andrew

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ