netdev - Re: [PATCH net-next v2 10/10] arm64: dts: marvell: mcbin: enable more networking ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 23 Aug 2017 10:28:42 +0300
From:   Baruch Siach <baruch@...s.co.il>
To:     Antoine Tenart <antoine.tenart@...e-electrons.com>
Cc:     davem@...emloft.net, jason@...edaemon.net, andrew@...n.ch,
        gregory.clement@...e-electrons.com,
        sebastian.hesselbarth@...il.com,
        thomas.petazzoni@...e-electrons.com, netdev@...r.kernel.org,
        linux@...linux.org.uk, nadavh@...vell.com, stefanc@...vell.com,
        mw@...ihalf.com, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net-next v2 10/10] arm64: dts: marvell: mcbin: enable
 more networking ports

Hi Antoine,

On Tue, Aug 22, 2017 at 07:08:30PM +0200, Antoine Tenart wrote:
> This patch enables the two GE/SFP ports. They are configured in 10GKR
> mode by default. To do this the cpm_xdmio is enabled as well, and two
> phy descriptions are added.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
> Tested-by: Marcin Wojtas <mw@...ihalf.com>
> ---
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 30 +++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> index abd39d1c1739..6cb4b000e1ac 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> @@ -127,6 +127,30 @@
>  	};
>  };
>  
> +&cpm_xmdio {
> +	status = "okay";
> +
> +	phy0: ethernet-phy@0 {
> +		compatible = "ethernet-phy-ieee802.3-c45";
> +		reg = <0>;
> +	};
> +
> +	phy1: ethernet-phy@1 {

Should be named 'ethernet-phy@8' to match the 'reg' property.

> +		compatible = "ethernet-phy-ieee802.3-c45";
> +		reg = <8>;
> +	};
> +};

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@...s.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -