netdev - Re: [PATCH net-next v2 05/14] net: mvpp2: do not force the link mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20170828113203.GF2568@kwain>
Date:   Mon, 28 Aug 2017 13:32:03 +0200
From:   Antoine Tenart <antoine.tenart@...e-electrons.com>
To:     Russell King - ARM Linux <linux@...linux.org.uk>
Cc:     Antoine Tenart <antoine.tenart@...e-electrons.com>,
        Marcin Wojtas <mw@...ihalf.com>,
        "David S. Miller" <davem@...emloft.net>, kishon@...com,
        Andrew Lunn <andrew@...n.ch>,
        Jason Cooper <jason@...edaemon.net>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Gregory Clément 
        <gregory.clement@...e-electrons.com>,
        Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
        nadavh@...vell.com, linux-kernel@...r.kernel.org,
        Stefan Chulski <stefanc@...vell.com>,
        Miquèl Raynal 
        <miquel.raynal@...e-electrons.com>, netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next v2 05/14] net: mvpp2: do not force the link mode

On Mon, Aug 28, 2017 at 12:06:24PM +0100, Russell King - ARM Linux wrote:
> On Mon, Aug 28, 2017 at 11:40:51AM +0200, Antoine Tenart wrote:
> > On Mon, Aug 28, 2017 at 09:51:52AM +0100, Russell King - ARM Linux wrote:
> > > On Mon, Aug 28, 2017 at 10:38:37AM +0200, Marcin Wojtas wrote:
> > > >
> > > > Can you be 100% sure that when using SGMII with PHY's (like Marvell
> > > > Alaska 88E1xxx series), is in-band link information always available?
> > > > I'd be very cautious with such assumption and use in-band management
> > > > only when set in the DT, like mvneta. I think phylib can properly can
> > > > do its work when MDIO connection is provided on the board.
> > > 
> > > There is another issue to be aware of: if you're wanting to use flow
> > > control autonegotiation, that is not carried across SGMII's in-band
> > > signalling.  If you want to use SGMII's in-band signalling for the
> > > duplex and speed information, you still need phylib's notification
> > > to properly set the flow control.
> > > 
> > > <plug>
> > > Switching mvpp2 to use phylink (which is needed for the 1G SFP slot on
> > > mcbin) will handle all this for you - dealing with both in-band and
> > > out-of-band negotiation methods, and combining them in the appropriate
> > > manner for the selected operation mode.
> > > </plug>
> > 
> > So probably the best move here is to remove this patch, and wait for the
> > phylink support in the PPv2 driver.
> 
> I've nothing on that specifically for the mvpp2 driver - what I have is
> for mvneta and the Marvell mvpp2x driver, with GMAC support extracted
> from mvneta (that last bit is rather dirty at the moment so not
> published anywhere, and doesn't cater for PP v2.1 at all.)
> 
> I ought to have posted the mvneta part of the phylink patches, but I
> didn't get around to it early enough in this cycle - there are probably
> quite a number of conflicts with net-next now, so I think it's too late
> to submit it for mainline.
> 
> I know Andrew has already looked at them in my git tree as part of the
> review of phylink when that was merged - which should be adequate to
> give an example of how to implement it for the mainline PP v2 driver.

OK, good. When looking at the phylink support in the PPv2 driver we'll
look into what you did for mvneta (I saw it as well on your tree). In
the meantime I'll respin this series without this patch.

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)