netdev - [PATCH net-next v2 3/4] net: systemport: Set correct RSB endian bits based on host

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1504038918-49254-4-git-send-email-f.fainelli@gmail.com>
Date:   Tue, 29 Aug 2017 13:35:17 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, opendmb@...il.com, andrew@...n.ch,
        vivien.didelot@...oirfairelinux.com,
        Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next v2 3/4] net: systemport: Set correct RSB endian bits based on host

RSB_SWAP0 needs to match the host CPU endian, and it needs to be set
for LE and clear for BE. RSB_SWAP1 must always be cleared for SYSTEMPORT
Lite.

With these settings, we have the Receive Status Block always match the
host endian and we do not need to perform any conversion. Since there is
not necessarily a CONFIG_CPU_LITTLE_ENDIAN option defined, we test for
!CONFIG_CPU_BIG_ENDIAN which is guaranteed to be set.

Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index a7e84292af50..931751e4f369 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1762,10 +1762,14 @@ static void rbuf_init(struct bcm_sysport_priv *priv)
 	reg = rbuf_readl(priv, RBUF_CONTROL);
 	reg |= RBUF_4B_ALGN | RBUF_RSB_EN;
 	/* Set a correct RSB format on SYSTEMPORT Lite */
-	if (priv->is_lite) {
+	if (priv->is_lite)
 		reg &= ~RBUF_RSB_SWAP1;
+
+	/* Set a correct RSB format based on host endian */
+	if (!IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		reg |= RBUF_RSB_SWAP0;
-	}
+	else
+		reg &= ~RBUF_RSB_SWAP0;
 	rbuf_writel(priv, reg, RBUF_CONTROL);
 }
 
-- 
1.9.1