[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1504310354-42773-1-git-send-email-f.fainelli@gmail.com>
Date: Fri, 1 Sep 2017 16:59:10 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, andrew@...n.ch,
vivien.didelot@...oirfairelinux.com, jiri@...nulli.us,
jhs@...atatu.com, xiyou.wangcong@...il.com,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 0/4] net: dsa: Allow switch drivers to indicate number of TX queues
Hi all,
This patch series extracts the parts of the patch set that are likely not to be
controversial and actually bringing multi-queue support to DSA-created network
devices.
With these patches, we can now use sch_multiq as documented under
Documentation/networking/multique.txt and let applications dedice the switch
port output queue they want to use. Currently only Broadcom tags utilize that
information.
Changes from RFC:
- dropped the ability to configure RX queues since we don't do anything with
those just yet
- dropped the patches that dealt with binding the DSA slave network devices
queues with their master network devices queues this will be worked on
separately.
Florian Fainelli (4):
net: dsa: Allow switch drivers to indicate number of TX queues
net: dsa: tag_brcm: Set output queue from skb queue mapping
net: dsa: bcm_sf2: Advertise number of egress queues
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
drivers/net/dsa/bcm_sf2.c | 12 ++++++++++++
include/net/dsa.h | 3 +++
net/dsa/slave.c | 8 ++++++--
net/dsa/tag_brcm.c | 3 ++-
4 files changed, 23 insertions(+), 3 deletions(-)
--
1.9.1
Powered by blists - more mailing lists