| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 7 Sep 2017 21:09:04 +0000
From: <Tristram.Ha@...rochip.com>
To: <andrew@...n.ch>, <muvarov@...il.com>, <pavel@....cz>,
<nathan.leigh.conrad@...il.com>,
<vivien.didelot@...oirfairelinux.com>, <f.fainelli@...il.com>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<Woojung.Huh@...rochip.com>
Subject: [PATCH RFC 2/6] Create new file ksz9477.c from KSZ9477 code in
ksz_common.c
From: Tristram Ha <Tristram.Ha@...rochip.com>
Create new ksz9477.c file from original ksz_common.c.
Signed-off-by: Tristram Ha <Tristram.Ha@...rochip.com>
---
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
new file mode 100644
index 0000000..bc722b4
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -0,0 +1,1317 @@
+/*
+ * Microchip switch driver main logic
+ *
+ * Copyright (C) 2017
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+any
+ * purpose with or without fee is hereby granted, provided that the
+above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE
+FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+#include "ksz_9477_reg.h"
+
+static const struct {
+ int index;
+ char string[ETH_GSTRING_LEN];
+} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+ { 0x00, "rx_hi" },
+ { 0x01, "rx_undersize" },
+ { 0x02, "rx_fragments" },
+ { 0x03, "rx_oversize" },
+ { 0x04, "rx_jabbers" },
+ { 0x05, "rx_symbol_err" },
+ { 0x06, "rx_crc_err" },
+ { 0x07, "rx_align_err" },
+ { 0x08, "rx_mac_ctrl" },
+ { 0x09, "rx_pause" },
+ { 0x0A, "rx_bcast" },
+ { 0x0B, "rx_mcast" },
+ { 0x0C, "rx_ucast" },
+ { 0x0D, "rx_64_or_less" },
+ { 0x0E, "rx_65_127" },
+ { 0x0F, "rx_128_255" },
+ { 0x10, "rx_256_511" },
+ { 0x11, "rx_512_1023" },
+ { 0x12, "rx_1024_1522" },
+ { 0x13, "rx_1523_2000" },
+ { 0x14, "rx_2001" },
+ { 0x15, "tx_hi" },
+ { 0x16, "tx_late_col" },
+ { 0x17, "tx_pause" },
+ { 0x18, "tx_bcast" },
+ { 0x19, "tx_mcast" },
+ { 0x1A, "tx_ucast" },
+ { 0x1B, "tx_deferred" },
+ { 0x1C, "tx_total_col" },
+ { 0x1D, "tx_exc_col" },
+ { 0x1E, "tx_single_col" },
+ { 0x1F, "tx_mult_col" },
+ { 0x80, "rx_total" },
+ { 0x81, "tx_total" },
+ { 0x82, "rx_discards" },
+ { 0x83, "tx_discards" },
+};
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool
+set) {
+ u8 data;
+
+ ksz_read8(dev, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ ksz_write8(dev, addr, data);
+}
+
+static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool
+set) {
+ u32 data;
+
+ ksz_read32(dev, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ ksz_write32(dev, addr, data);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+ bool set)
+{
+ u32 addr;
+ u8 data;
+
+ addr = PORT_CTRL_ADDR(port, offset);
+ ksz_read8(dev, addr, &data);
+
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+
+ ksz_write8(dev, addr, data);
+}
+
+static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
+ u32 bits, bool set)
+{
+ u32 addr;
+ u32 data;
+
+ addr = PORT_CTRL_ADDR(port, offset);
+ ksz_read32(dev, addr, &data);
+
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+
+ ksz_write32(dev, addr, data);
+}
+
+static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int
+timeout) {
+ u8 data;
+
+ do {
+ ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32
+*vlan_table) {
+ struct ksz_device *dev = ds->priv;
+ int ret;
+
+ mutex_lock(&dev->vlan_mutex);
+
+ ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+ ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+ /* wait to be cleared */
+ ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read vlan table\n");
+ goto exit;
+ }
+
+ ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+ ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+ ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+ ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+ mutex_unlock(&dev->vlan_mutex);
+
+ return ret;
+}
+
+static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32
+*vlan_table) {
+ struct ksz_device *dev = ds->priv;
+ int ret;
+
+ mutex_lock(&dev->vlan_mutex);
+
+ ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+ ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+ ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+ ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+ ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+ /* wait to be cleared */
+ ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to write vlan table\n");
+ goto exit;
+ }
+
+ ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+ /* update vlan cache table */
+ dev->vlan_cache[vid].table[0] = vlan_table[0];
+ dev->vlan_cache[vid].table[1] = vlan_table[1];
+ dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+ mutex_unlock(&dev->vlan_mutex);
+
+ return ret;
+}
+
+static void read_table(struct dsa_switch *ds, u32 *table) {
+ struct ksz_device *dev = ds->priv;
+
+ ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+ ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+ ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+ ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); }
+
+static void write_table(struct dsa_switch *ds, u32 *table) {
+ struct ksz_device *dev = ds->priv;
+
+ ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+ ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+ ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+ ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); }
+
+static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int
+timeout) {
+ u32 data;
+
+ do {
+ ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int
+timeout) {
+ u32 data;
+
+ do {
+ ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ksz_reset_switch(struct ksz_device *dev) {
+ u8 data8;
+ u16 data16;
+ u32 data32;
+
+ /* reset switch */
+ ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+ /* turn off SPI DO Edge select */
+ ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+ data8 &= ~SPI_AUTO_EDGE_DETECTION;
+ ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+
+ /* default configuration */
+ ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+ data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+ SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+ ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+ /* disable interrupts */
+ ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+ ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+ ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+ /* set broadcast storm protection 10% rate */
+ ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
+ data16 &= ~BROADCAST_STORM_RATE;
+ data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
+ ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
+
+ return 0;
+}
+
+static void port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+ u8 data8;
+ u16 data16;
+
+ /* enable tag tail for host port */
+ if (cpu_port)
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+ true);
+
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+ /* set back pressure */
+ ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE,
+true);
+
+ /* set flow control */
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+ PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true);
+
+ /* enable broadcast storm limit */
+ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM,
+true);
+
+ /* disable DiffServ priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE,
+false);
+
+ /* replace priority */
+ ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+ false);
+ ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+ MTI_PVID_REPLACE, false);
+
+ /* enable 802.1p priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+ /* configure MAC to 1G & RGMII mode */
+ ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
+ data8 |= PORT_RGMII_ID_EG_ENABLE;
+ data8 &= ~PORT_MII_NOT_1GBIT;
+ data8 &= ~PORT_MII_SEL_M;
+ data8 |= PORT_RGMII_SEL;
+ ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
+
+ /* clear pending interrupts */
+ ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); }
+
+static void ksz_config_cpu_port(struct dsa_switch *ds) {
+ struct ksz_device *dev = ds->priv;
+ int i;
+
+ ds->num_ports = dev->port_cnt;
+
+ for (i = 0; i < ds->num_ports; i++) {
+ if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+ dev->cpu_port = i;
+
+ /* enable cpu port */
+ port_setup(dev, i, true);
+ dev->HOST_MASK = (1 << dev->cpu_port);
+ dev->PORT_MASK |= dev->HOST_MASK;
+ }
+ }
+}
+
+static int ksz_setup(struct dsa_switch *ds) {
+ struct ksz_device *dev = ds->priv;
+ int ret = 0;
+
+ dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+ dev->num_vlans, GFP_KERNEL);
+ if (!dev->vlan_cache)
+ return -ENOMEM;
+
+ ret = ksz_reset_switch(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+ return ret;
+ }
+
+ /* accept packet up to 2000bytes */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+
+ ksz_config_cpu_port(ds);
+
+ ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
+
+ /* queue based egress rate limit */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+ /* start switch */
+ ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
+
+ return 0;
+}
+
+static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch
+*ds) {
+ return DSA_TAG_PROTO_KSZ;
+}
+
+static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) {
+ struct ksz_device *dev = ds->priv;
+ u16 val = 0;
+
+ ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+
+ return val;
+}
+
+static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg,
+u16 val) {
+ struct ksz_device *dev = ds->priv;
+
+ ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+
+ return 0;
+}
+
+static int ksz_enable_port(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct ksz_device *dev = ds->priv;
+
+ /* setup slave port */
+ port_setup(dev, port, false);
+
+ return 0;
+}
+
+static void ksz_disable_port(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct ksz_device *dev = ds->priv;
+
+ /* there is no port disable */
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true); }
+
+static int ksz_sset_count(struct dsa_switch *ds) {
+ return TOTAL_SWITCH_COUNTER_NUM;
+}
+
+static void ksz_get_strings(struct dsa_switch *ds, int port, uint8_t
+*buf) {
+ int i;
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
+ ETH_GSTRING_LEN);
+ }
+}
+
+static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *buf)
+{
+ struct ksz_device *dev = ds->priv;
+ int i;
+ u32 data;
+ int timeout;
+
+ mutex_lock(&dev->stats_mutex);
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ data = MIB_COUNTER_READ;
+ data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
+ ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+ timeout = 1000;
+ do {
+ ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+ &data);
+ usleep_range(1, 10);
+ if (!(data & MIB_COUNTER_READ))
+ break;
+ } while (timeout-- > 0);
+
+ /* failed to read MIB. get out of loop */
+ if (!timeout) {
+ dev_dbg(dev->dev, "Failed to get MIB\n");
+ break;
+ }
+
+ /* count resets upon read */
+ ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+
+ dev->ports[port].mib.info[i].counter += (uint64_t)data;
+ buf[i] = dev->ports[port].mib.info[i].counter;
+ }
+
+ mutex_unlock(&dev->stats_mutex);
+}
+
+static void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8
+state) {
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ ksz_pread8(dev, port, P_STP_CTRL, &data);
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ data |= PORT_LEARN_DISABLE;
+ break;
+ case BR_STATE_LISTENING:
+ data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+ break;
+ case BR_STATE_LEARNING:
+ data |= PORT_RX_ENABLE;
+ break;
+ case BR_STATE_FORWARDING:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+ break;
+ case BR_STATE_BLOCKING:
+ data |= PORT_LEARN_DISABLE;
+ break;
+ default:
+ dev_err(ds->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ ksz_pwrite8(dev, port, P_STP_CTRL, data); }
+
+static void ksz_port_fast_age(struct dsa_switch *ds, int port) {
+ struct ksz_device *dev = ds->priv;
+ u8 data8;
+
+ ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+ data8 |= SW_FAST_AGING;
+ ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+ data8 &= ~SW_FAST_AGING;
+ ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); }
+
+static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port,
+bool flag) {
+ struct ksz_device *dev = ds->priv;
+
+ if (flag) {
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+ PORT_VLAN_LOOKUP_VID_0, true);
+ ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
+ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+ } else {
+ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+ ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+ PORT_VLAN_LOOKUP_VID_0, false);
+ }
+
+ return 0;
+}
+
+static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
+{
+ /* nothing needed */
+
+ return 0;
+}
+
+static void ksz_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans) {
+ struct ksz_device *dev = ds->priv;
+ u32 vlan_table[3];
+ u16 vid;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ if (get_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to get vlan table\n");
+ return;
+ }
+
+ vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
+ if (untagged)
+ vlan_table[1] |= BIT(port);
+ else
+ vlan_table[1] &= ~BIT(port);
+ vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+ vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+ if (set_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to set vlan table\n");
+ return;
+ }
+
+ /* change PVID */
+ if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+ ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
+ }
+}
+
+static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan) {
+ struct ksz_device *dev = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ u32 vlan_table[3];
+ u16 vid;
+ u16 pvid;
+
+ ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+ pvid = pvid & 0xFFF;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ if (get_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to get vlan table\n");
+ return -ETIMEDOUT;
+ }
+
+ vlan_table[2] &= ~BIT(port);
+
+ if (pvid == vid)
+ pvid = 1;
+
+ if (untagged)
+ vlan_table[1] &= ~BIT(port);
+
+ if (set_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to set vlan table\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+ return 0;
+}
+
+struct alu_struct {
+ /* entry 1 */
+ u8 is_static:1;
+ u8 is_src_filter:1;
+ u8 is_dst_filter:1;
+ u8 prio_age:3;
+ u32 _reserv_0_1:23;
+ u8 mstp:3;
+ /* entry 2 */
+ u8 is_override:1;
+ u8 is_use_fid:1;
+ u32 _reserv_1_1:23;
+ u8 port_forward:7;
+ /* entry 3 & 4*/
+ u32 _reserv_2_1:9;
+ u8 fid:7;
+ u8 mac[ETH_ALEN];
+};
+
+static int ksz_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid) {
+ struct ksz_device *dev = ds->priv;
+ u32 alu_table[4];
+ u32 data;
+ int ret = 0;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* find any entry with mac & vid */
+ data = vid << ALU_FID_INDEX_S;
+ data |= ((addr[0] << 8) | addr[1]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+ data = ((addr[2] << 24) | (addr[3] << 16));
+ data |= ((addr[4] << 8) | addr[5]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+ /* start read operation */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU\n");
+ goto exit;
+ }
+
+ /* read ALU entry */
+ read_table(ds, alu_table);
+
+ /* update ALU entry */
+ alu_table[0] = ALU_V_STATIC_VALID;
+ alu_table[1] |= BIT(port);
+ if (vid)
+ alu_table[1] |= ALU_V_USE_FID;
+ alu_table[2] = (vid << ALU_V_FID_S);
+ alu_table[2] |= ((addr[0] << 8) | addr[1]);
+ alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+ alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+ write_table(ds, alu_table);
+
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid) {
+ struct ksz_device *dev = ds->priv;
+ u32 alu_table[4];
+ u32 data;
+ int ret = 0;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* read any entry with mac & vid */
+ data = vid << ALU_FID_INDEX_S;
+ data |= ((addr[0] << 8) | addr[1]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+ data = ((addr[2] << 24) | (addr[3] << 16));
+ data |= ((addr[4] << 8) | addr[5]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+ /* start read operation */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU\n");
+ goto exit;
+ }
+
+ ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+ if (alu_table[0] & ALU_V_STATIC_VALID) {
+ ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+ ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+ ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+ /* clear forwarding port */
+ alu_table[2] &= ~BIT(port);
+
+ /* if there is no port to forward, clear table */
+ if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
+ alu_table[0] = 0;
+ alu_table[1] = 0;
+ alu_table[2] = 0;
+ alu_table[3] = 0;
+ }
+ } else {
+ alu_table[0] = 0;
+ alu_table[1] = 0;
+ alu_table[2] = 0;
+ alu_table[3] = 0;
+ }
+
+ write_table(ds, alu_table);
+
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static void convert_alu(struct alu_struct *alu, u32 *alu_table) {
+ alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+ alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+ alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+ alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+ ALU_V_PRIO_AGE_CNT_M;
+ alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+ alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+ alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+ alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+ alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+ alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+ alu->mac[1] = alu_table[2] & 0xFF;
+ alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+ alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+ alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+ alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data) {
+ struct ksz_device *dev = ds->priv;
+ int ret = 0;
+ u32 ksz_data;
+ u32 alu_table[4];
+ struct alu_struct alu;
+ int timeout;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* start ALU search */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+ do {
+ timeout = 1000;
+ do {
+ ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
+ if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (!timeout) {
+ dev_dbg(dev->dev, "Failed to search ALU\n");
+ ret = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* read ALU table */
+ read_table(ds, alu_table);
+
+ convert_alu(&alu, alu_table);
+
+ if (alu.port_forward & BIT(port)) {
+ ret = cb(alu.mac, alu.fid, alu.is_static, data);
+ if (ret)
+ goto exit;
+ }
+ } while (ksz_data & ALU_START);
+
+exit:
+
+ /* stop ALU search */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans)
+{
+ /* nothing to do */
+ return 0;
+}
+
+static void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 static_table[4];
+ u32 data;
+ int index;
+ u32 mac_hi, mac_lo;
+
+ mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+ mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+ mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+ mutex_lock(&dev->alu_mutex);
+
+ for (index = 0; index < dev->num_statics; index++) {
+ /* find empty slot first */
+ data = (index << ALU_STAT_INDEX_S) |
+ ALU_STAT_READ | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ goto exit;
+ }
+
+ /* read ALU static table */
+ read_table(ds, static_table);
+
+ if (static_table[0] & ALU_V_STATIC_VALID) {
+ /* check this has same vid & mac address */
+ if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+ ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+ static_table[3] == mac_lo) {
+ /* found matching one */
+ break;
+ }
+ } else {
+ /* found empty one */
+ break;
+ }
+ }
+
+ /* no available entry */
+ if (index == dev->num_statics)
+ goto exit;
+
+ /* add entry */
+ static_table[0] = ALU_V_STATIC_VALID;
+ static_table[1] |= BIT(port);
+ if (mdb->vid)
+ static_table[1] |= ALU_V_USE_FID;
+ static_table[2] = (mdb->vid << ALU_V_FID_S);
+ static_table[2] |= mac_hi;
+ static_table[3] = mac_lo;
+
+ write_table(ds, static_table);
+
+ data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb) {
+ struct ksz_device *dev = ds->priv;
+ u32 static_table[4];
+ u32 data;
+ int index;
+ int ret = 0;
+ u32 mac_hi, mac_lo;
+
+ mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+ mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+ mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+ mutex_lock(&dev->alu_mutex);
+
+ for (index = 0; index < dev->num_statics; index++) {
+ /* find empty slot first */
+ data = (index << ALU_STAT_INDEX_S) |
+ ALU_STAT_READ | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ goto exit;
+ }
+
+ /* read ALU static table */
+ read_table(ds, static_table);
+
+ if (static_table[0] & ALU_V_STATIC_VALID) {
+ /* check this has same vid & mac address */
+
+ if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+ ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+ static_table[3] == mac_lo) {
+ /* found matching one */
+ break;
+ }
+ }
+ }
+
+ /* no available entry */
+ if (index == dev->num_statics) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* clear port */
+ static_table[1] &= ~BIT(port);
+
+ if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+ /* delete entry */
+ static_table[0] = 0;
+ static_table[1] = 0;
+ static_table[2] = 0;
+ static_table[3] = 0;
+ }
+
+ write_table(ds, static_table);
+
+ data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (ingress)
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+ else
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+ /* configure mirror port */
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, true);
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+ return 0;
+}
+
+static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror) {
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ if (mirror->ingress)
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+ else
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+ if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, false);
+}
+
+static const struct dsa_switch_ops ksz_switch_ops = {
+ .get_tag_protocol = ksz_get_tag_protocol,
+ .setup = ksz_setup,
+ .phy_read = ksz_phy_read16,
+ .phy_write = ksz_phy_write16,
+ .port_enable = ksz_enable_port,
+ .port_disable = ksz_disable_port,
+ .get_strings = ksz_get_strings,
+ .get_ethtool_stats = ksz_get_ethtool_stats,
+ .get_sset_count = ksz_sset_count,
+ .port_stp_state_set = ksz_port_stp_state_set,
+ .port_fast_age = ksz_port_fast_age,
+ .port_vlan_filtering = ksz_port_vlan_filtering,
+ .port_vlan_prepare = ksz_port_vlan_prepare,
+ .port_vlan_add = ksz_port_vlan_add,
+ .port_vlan_del = ksz_port_vlan_del,
+ .port_fdb_dump = ksz_port_fdb_dump,
+ .port_fdb_add = ksz_port_fdb_add,
+ .port_fdb_del = ksz_port_fdb_del,
+ .port_mdb_prepare = ksz_port_mdb_prepare,
+ .port_mdb_add = ksz_port_mdb_add,
+ .port_mdb_del = ksz_port_mdb_del,
+ .port_mirror_add = ksz_port_mirror_add,
+ .port_mirror_del = ksz_port_mirror_del,
+};
+
+static u32 ksz_get_port_addr(int port, int offset) {
+ return PORT_CTRL_ADDR(port, offset);
+}
+
+/* For Ingress (Host -> KSZ), 2 bytes are added before FCS.
+ *
+-----------------------------------------------------------------------
+----
+ *
+DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|tag1(1byte)|FCS(4by
+tes)
+ *
+-----------------------------------------------------------------------
+----
+ * tag0 : Prioritization (not used now)
+ * tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2,
+0x10=port5)
+ *
+ * For Egress (KSZ -> Host), 1 byte is added before FCS.
+ *
+-----------------------------------------------------------------------
+----
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
+ *
+-----------------------------------------------------------------------
+----
+ * tag0 : zero-based value represents port
+ * (eg, 0x00=port1, 0x02=port3, 0x06=port7)
+ */
+
+#define KSZ_INGRESS_TAG_LEN 2
+#define KSZ_EGRESS_TAG_LEN 1
+#define KSZ_PTP_TAG_LEN 4
+#define KSZ_PTP_TAG_INDICATION 0x80
+
+/**
+ * This information needs to be communicated to the MAC driver so that
+it can
+ * receive the frames correctly from the switch as some MAC drivers
+adhere to
+ * receive exactly 1518 bytes.
+ */
+static int ksz_get_rx_len(struct ksz_device *dev) {
+ int len = KSZ_EGRESS_TAG_LEN;
+
+ /* PTP function is turned on. */
+ if (dev->overrides & PTP_TAG)
+ len += KSZ_PTP_TAG_LEN;
+ return len;
+}
+
+/**
+ * This information tells how many more bytes need to be allocated to
+ * accommodate the tail tag.
+ */
+static int ksz_get_tx_len(struct ksz_device *dev) {
+ int len = KSZ_INGRESS_TAG_LEN;
+
+ /* PTP function is turned on. */
+ if (dev->overrides & PTP_TAG)
+ len += KSZ_PTP_TAG_LEN;
+ return len;
+}
+
+static void ksz_add_tail_tag(struct ksz_device *dev, struct sk_buff *skb,
+ int port)
+{
+ struct {
+ u32 timestamp;
+ u16 ports;
+ } tx_tag;
+ u8 *trailer;
+ u8 *tag;
+ int len = KSZ_INGRESS_TAG_LEN;
+ int ptp_len = 0;
+
+ port = 1 << port;
+
+ /* PTP function is turned on. */
+ if (dev->overrides & PTP_TAG)
+ ptp_len = KSZ_PTP_TAG_LEN;
+ len += ptp_len;
+ trailer = skb_put(skb, len);
+ memset(&tx_tag, 0, sizeof(tx_tag));
+ tx_tag.ports = port & dev->PORT_MASK;
+ tx_tag.ports = cpu_to_be16(tx_tag.ports);
+ tag = (u8 *)&tx_tag;
+ memcpy(trailer, &tag[4 - ptp_len], ptp_len + KSZ_INGRESS_TAG_LEN); }
+
+static int ksz_get_tail_tag(struct ksz_device *dev, struct sk_buff *skb,
+ int *port)
+{
+ u8 *trailer;
+ int len = KSZ_EGRESS_TAG_LEN;
+
+ trailer = skb_tail_pointer(skb) - len;
+ if (*trailer & KSZ_PTP_TAG_INDICATION)
+ len += KSZ_PTP_TAG_LEN;
+ *trailer &= ~KSZ_PTP_TAG_INDICATION;
+ *port = *trailer;
+ if (*port >= 0 && *port < dev->mib_port_cnt) {
+ struct ksz_port *p = &dev->ports[*port];
+
+ /**
+ * Switch is forwarding when port membership includes other
+ * ports.
+ */
+ if (p->member & ~((1 << *port) | dev->HOST_MASK))
+ skb->offload_fwd_mark = 1;
+ }
+ return len;
+}
+
+static int ksz_switch_detect(struct ksz_device *dev) {
+ u8 data8;
+ u32 id32;
+ int ret;
+
+ /* turn off SPI DO Edge select */
+ ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+ if (ret)
+ return ret;
+
+ data8 &= ~SPI_AUTO_EDGE_DETECTION;
+ ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+ if (ret)
+ return ret;
+
+ /* read chip id */
+ ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
+ if (ret)
+ return ret;
+
+ /* Number of ports can be reduced depending on chip. */
+ dev->mib_port_cnt = TOTAL_PORT_NUM;
+
+ dev->chip_id = id32;
+
+ dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+ /* Try to read MIB counters in all ports every second. */
+ dev->MIB_READ_INTERVAL = msecs_to_jiffies(1000 / dev->mib_port_cnt);
+
+ return 0;
+}
+
+struct ksz_chip_data {
+ u32 chip_id;
+ const char *dev_name;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_ports;
+ int port_cnt;
+};
+
+static const struct ksz_chip_data ksz_switch_chips[] = {
+ {
+ .chip_id = 0x00947700,
+ .dev_name = "KSZ9477",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total physical port count */
+ },
+};
+
+static int ksz_switch_init(struct ksz_device *dev) {
+ int i;
+
+ mutex_init(&dev->reg_mutex);
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->alu_mutex);
+ mutex_init(&dev->vlan_mutex);
+
+ dev->ds->ops = &ksz_switch_ops;
+
+ for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
+ const struct ksz_chip_data *chip = &ksz_switch_chips[i];
+
+ if (dev->chip_id == chip->chip_id) {
+ dev->name = chip->dev_name;
+ dev->num_vlans = chip->num_vlans;
+ dev->num_alus = chip->num_alus;
+ dev->num_statics = chip->num_statics;
+ dev->port_cnt = chip->port_cnt;
+ dev->cpu_ports = chip->cpu_ports;
+
+ break;
+ }
+ }
+
+ /* no switch found */
+ if (!dev->port_cnt)
+ return -ENODEV;
+
+ dev->PORT_MASK = (1 << dev->port_cnt) - 1;
+ dev->PORT_MASK |= dev->HOST_MASK;
+
+ i = dev->mib_port_cnt;
+ dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+ GFP_KERNEL);
+ if (!dev->ports)
+ return -ENOMEM;
+ for (i = 0; i < dev->mib_port_cnt; i++) {
+ dev->ports[i].mib.info =
+ devm_kzalloc(dev->dev,
+ sizeof(struct ksz_port_mib_info) *
+ TOTAL_SWITCH_COUNTER_NUM, GFP_KERNEL);
+ if (!dev->ports[i].mib.info)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void ksz_switch_exit(struct ksz_device *dev) { }
+
+static const struct ksz_dev_ops ksz9477_dev_ops = {
+ .get_port_addr = ksz_get_port_addr,
+ .reset = ksz_reset_switch,
+ .get_rx_len = ksz_get_rx_len,
+ .get_tx_len = ksz_get_tx_len,
+ .add_tail_tag = ksz_add_tail_tag,
+ .get_tail_tag = ksz_get_tail_tag,
+ .detect = ksz_switch_detect,
+ .init = ksz_switch_init,
+ .exit = ksz_switch_exit,
+};
+
+int ksz9477_switch_register(struct ksz_device *dev) {
+ return ksz_switch_register(dev, &ksz9477_dev_ops); }
+EXPORT_SYMBOL(ksz9477_switch_register);
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@...rochip.com>");
+MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
Powered by blists - more mailing lists