netdev - Re: RTL8192EE PCIe Wireless Network Adapter crashed with linux-4.13

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <35856452-c05c-d116-f91b-0964947ec8ae@lwfinger.net>
Date:   Fri, 15 Sep 2017 14:21:21 -0500
From:   Larry Finger <Larry.Finger@...inger.net>
To:     Zwindl <zwindl@...tonmail.com>
Cc:     "linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
        "chaoming_li@...lsil.com.cn" <chaoming_li@...lsil.com.cn>,
        "kvalo@...eaurora.org" <kvalo@...eaurora.org>,
        "pkshih@...ltek.com" <pkshih@...ltek.com>,
        "johannes.berg@...el.com" <johannes.berg@...el.com>,
        "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: RTL8192EE PCIe Wireless Network Adapter crashed with linux-4.13

On 09/15/2017 12:12 PM, Zwindl wrote:
> Thanks for your patient and advice, I'll keep that in mind.
> I do want help, and I got 1 day to build the system, but I can't recall how to 
> compile it, The last time I compile kernel is 2013, so, maybe I'll ask you so 
> many stupid questions during the build time.
> ZWindL

Building a new kernel is not difficult. In an average week, I make at least 10 
new kernels. Many of them are done on slow machines that take many hours. At 
least, your i5 CPU should do it in less that one hour.

Step 1: Download the kernel sources using

git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

If your system complains that the git command is unknown, then you will need to 
install it with your package manager (pacman?).

Step 2: "cd  linux" and copy the latest /boot/config-..... to the linux source 
directory as ".config". Edit .config, find the line that says
"# CONFIG_LOCALVERSION_AUTO is not set", and change the line to read 
"CONFIG_LOCALVERSION_AUTO=y".

Step 3: Build and install the latest version using

make -j9
sudo make modules_install install

You will need to answer some configuration questions at the start of the first 
make line. Answer with the default value, i.e. just use an ENTER. When the build 
is complete, reboot. Grub should show an entry for something like 
v4.13-12084-ged43e4d190d0. The numbers after the 4.13 will likely be different, 
but the form will match. Check that the new kernel still has the fault. If not, 
it has been fixed and we do not need to find it.

It the problem is still in the latest version of the kernel, then we start the 
bisection with the following:

git bisect start
git bisect bad v4.13
git bisect good v4.12

At this point, git will report the number of revisions to test, the likely 
number of tries, and the SHA hash for the new kernel. Record the first 7 digits 
of the hash, and repeat the make commands above. After the build is complete, 
reboot into the kernel with the hash in the version name and test. Then enter 
the command "git bisect xxx", where xxx is good or bad depending on the test. A 
new trial will be generated by bisecting the appropriate half of the commits. 
Record its hash and redo the build. Repeat until git tells you the bad commit.

This process will generate a number of kernels that will take quite a bit of 
disk space. If you run short, you can delete kernels that have already been 
tested from /boot. You should also delete the corresponding modules from 
/lib/modules.

Good luck,

Larry