netdev - [PATCH 1/4] dt-bindings: net: ravb: Document optional reset-gpios property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1506614014-4398-2-git-send-email-geert+renesas@glider.be>
Date:   Thu, 28 Sep 2017 17:53:31 +0200
From:   Geert Uytterhoeven <geert+renesas@...der.be>
To:     "David S . Miller" <davem@...emloft.net>,
        Simon Horman <horms@...ge.net.au>,
        Magnus Damm <magnus.damm@...il.com>
Cc:     Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Niklas Söderlund 
        <niklas.soderlund+renesas@...natech.se>, netdev@...r.kernel.org,
        linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
        Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH 1/4] dt-bindings: net: ravb: Document optional reset-gpios property

The optional "reset-gpios" property (part of the generic MDIO bus
properties) lets us describe the GPIO used for resetting the Ethernet
PHY.

Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
 Documentation/devicetree/bindings/net/renesas,ravb.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index c902261893b913f5..4a6ec1ba32d0bf16 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -52,6 +52,7 @@ Optional properties:
 			 AVB_LINK signal.
 - renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is
 				 active-low instead of normal active-high.
+- reset-gpios: see mdio.txt in the same directory.
 
 Example:
 
@@ -99,6 +100,7 @@ Example:
 		pinctrl-0 = <&ether_pins>;
 		pinctrl-names = "default";
 		renesas,no-ether-link;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-- 
2.7.4