| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170930002657.15291-6-vinicius.gomes@intel.com>
Date: Fri, 29 Sep 2017 17:26:57 -0700
From: Vinicius Costa Gomes <vinicius.gomes@...el.com>
To: netdev@...r.kernel.org, intel-wired-lan@...ts.osuosl.org
Cc: Andre Guedes <andre.guedes@...el.com>, jhs@...atatu.com,
xiyou.wangcong@...il.com, jiri@...nulli.us, ivan.briano@...el.com,
jesus.sanchez-palencia@...el.com, boon.leong.ong@...el.com,
richardcochran@...il.com, henrik@...tad.us, levipearson@...il.com,
rodney.cummings@...com
Subject: [next-queue PATCH v2 5/5] igb: Add support for CBS offload
From: Andre Guedes <andre.guedes@...el.com>
This patch adds support for Credit-Based Shaper (CBS) qdisc offload
from Traffic Control system. This support enable us to leverage the
Forwarding and Queuing for Time-Sensitive Streams (FQTSS) features
from Intel i210 Ethernet Controller. FQTSS is the former 802.1Qav
standard which was merged into 802.1Q in 2014. It enables traffic
prioritization and bandwidth reservation via the Credit-Based Shaper
which is implemented in hardware by i210 controller.
The patch introduces the igb_setup_tc() function which implements the
support for CBS qdisc hardware offload in the IGB driver. CBS offload
is the only traffic control offload supported by the driver at the
moment.
FQTSS transmission mode from i210 controller is automatically enabled
by the IGB driver when the CBS is enabled for the first hardware
queue. Likewise, FQTSS mode is automatically disabled when CBS is
disabled for the last hardware queue. Changing FQTSS mode requires NIC
reset.
FQTSS feature is supported by i210 controller only.
Signed-off-by: Andre Guedes <andre.guedes@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_defines.h | 23 ++
drivers/net/ethernet/intel/igb/e1000_regs.h | 8 +
drivers/net/ethernet/intel/igb/igb.h | 6 +
drivers/net/ethernet/intel/igb/igb_main.c | 347 +++++++++++++++++++++++++
4 files changed, 384 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 1de82f247312..83cabff1e0ab 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -353,7 +353,18 @@
#define E1000_RXPBS_CFG_TS_EN 0x80000000
#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */
+#define I210_RXPBSIZE_MASK 0x0000003F
+#define I210_RXPBSIZE_PB_32KB 0x00000020
#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */
+#define I210_TXPBSIZE_MASK 0xC0FFFFFF
+#define I210_TXPBSIZE_PB0_8KB (8 << 0)
+#define I210_TXPBSIZE_PB1_8KB (8 << 6)
+#define I210_TXPBSIZE_PB2_4KB (4 << 12)
+#define I210_TXPBSIZE_PB3_4KB (4 << 18)
+
+#define I210_DTXMXPKTSZ_DEFAULT 0x00000098
+
+#define I210_SR_QUEUES_NUM 2
/* SerDes Control */
#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
@@ -1051,4 +1062,16 @@
#define E1000_VLAPQF_P_VALID(_n) (0x1 << (3 + (_n) * 4))
#define E1000_VLAPQF_QUEUE_MASK 0x03
+/* TX Qav Control fields */
+#define E1000_TQAVCTRL_XMIT_MODE BIT(0)
+#define E1000_TQAVCTRL_DATAFETCHARB BIT(4)
+#define E1000_TQAVCTRL_DATATRANARB BIT(8)
+
+/* TX Qav Credit Control fields */
+#define E1000_TQAVCC_IDLESLOPE_MASK 0xFFFF
+#define E1000_TQAVCC_QUEUEMODE BIT(31)
+
+/* Transmit Descriptor Control fields */
+#define E1000_TXDCTL_PRIORITY BIT(27)
+
#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 58adbf234e07..8eee081d395f 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -421,6 +421,14 @@ do { \
#define E1000_I210_FLA 0x1201C
+#define E1000_I210_DTXMXPKTSZ 0x355C
+
+#define E1000_I210_TXDCTL(_n) (0x0E028 + ((_n) * 0x40))
+
+#define E1000_I210_TQAVCTRL 0x3570
+#define E1000_I210_TQAVCC(_n) (0x3004 + ((_n) * 0x40))
+#define E1000_I210_TQAVHC(_n) (0x300C + ((_n) * 0x40))
+
#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n))
#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 06ffb2bc713e..92845692087a 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -281,6 +281,11 @@ struct igb_ring {
u16 count; /* number of desc. in the ring */
u8 queue_index; /* logical index of the ring*/
u8 reg_idx; /* physical index of the ring */
+ bool cbs_enable; /* indicates if CBS is enabled */
+ s32 idleslope; /* idleSlope in kbps */
+ s32 sendslope; /* sendSlope in kbps */
+ s32 hicredit; /* hiCredit in bytes */
+ s32 locredit; /* loCredit in bytes */
/* everything past this point are written often */
u16 next_to_clean;
@@ -621,6 +626,7 @@ struct igb_adapter {
#define IGB_FLAG_EEE BIT(14)
#define IGB_FLAG_VLAN_PROMISC BIT(15)
#define IGB_FLAG_RX_LEGACY BIT(16)
+#define IGB_FLAG_FQTSS BIT(17)
/* Media Auto Sense */
#define IGB_MAS_ENABLE_0 0X0001
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index fd4a46b03cc8..03b8d0f4acfd 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
+#include <net/pkt_sched.h>
#include <linux/net_tstamp.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
@@ -62,6 +63,17 @@
#define BUILD 0
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
__stringify(BUILD) "-k"
+
+enum queue_mode {
+ QUEUE_MODE_STRICT_PRIORITY,
+ QUEUE_MODE_STREAM_RESERVATION,
+};
+
+enum tx_queue_prio {
+ TX_QUEUE_PRIO_HIGH,
+ TX_QUEUE_PRIO_LOW,
+};
+
char igb_driver_name[] = "igb";
char igb_driver_version[] = DRV_VERSION;
static const char igb_driver_string[] =
@@ -1271,6 +1283,12 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
ring->count = adapter->tx_ring_count;
ring->queue_index = txr_idx;
+ ring->cbs_enable = false;
+ ring->idleslope = 0;
+ ring->sendslope = 0;
+ ring->hicredit = 0;
+ ring->locredit = 0;
+
u64_stats_init(&ring->tx_syncp);
u64_stats_init(&ring->tx_syncp2);
@@ -1598,6 +1616,284 @@ static void igb_get_hw_control(struct igb_adapter *adapter)
ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
}
+static void enable_fqtss(struct igb_adapter *adapter, bool enable)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+
+ WARN_ON(hw->mac.type != e1000_i210);
+
+ if (enable)
+ adapter->flags |= IGB_FLAG_FQTSS;
+ else
+ adapter->flags &= ~IGB_FLAG_FQTSS;
+
+ if (netif_running(netdev))
+ schedule_work(&adapter->reset_task);
+}
+
+static bool is_fqtss_enabled(struct igb_adapter *adapter)
+{
+ return (adapter->flags & IGB_FLAG_FQTSS) ? true : false;
+}
+
+static void set_tx_desc_fetch_prio(struct e1000_hw *hw, int queue,
+ enum tx_queue_prio prio)
+{
+ u32 val;
+
+ WARN_ON(hw->mac.type != e1000_i210);
+ WARN_ON(queue < 0 || queue > 4);
+
+ val = rd32(E1000_I210_TXDCTL(queue));
+
+ if (prio == TX_QUEUE_PRIO_HIGH)
+ val |= E1000_TXDCTL_PRIORITY;
+ else
+ val &= ~E1000_TXDCTL_PRIORITY;
+
+ wr32(E1000_I210_TXDCTL(queue), val);
+}
+
+static void set_queue_mode(struct e1000_hw *hw, int queue, enum queue_mode mode)
+{
+ u32 val;
+
+ WARN_ON(hw->mac.type != e1000_i210);
+ WARN_ON(queue < 0 || queue > 1);
+
+ val = rd32(E1000_I210_TQAVCC(queue));
+
+ if (mode == QUEUE_MODE_STREAM_RESERVATION)
+ val |= E1000_TQAVCC_QUEUEMODE;
+ else
+ val &= ~E1000_TQAVCC_QUEUEMODE;
+
+ wr32(E1000_I210_TQAVCC(queue), val);
+}
+
+/**
+ * igb_configure_cbs - Configure Credit-Based Shaper (CBS)
+ * @adapter: pointer to adapter struct
+ * @queue: queue number
+ * @enable: true = enable CBS, false = disable CBS
+ * @idleslope: idleSlope in kbps
+ * @sendslope: sendSlope in kbps
+ * @hicredit: hiCredit in bytes
+ * @locredit: loCredit in bytes
+ *
+ * Configure CBS for a given hardware queue. When disabling, idleslope,
+ * sendslope, hicredit, locredit arguments are ignored. Returns 0 if
+ * success. Negative otherwise.
+ **/
+static void igb_configure_cbs(struct igb_adapter *adapter, int queue,
+ bool enable, int idleslope, int sendslope,
+ int hicredit, int locredit)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tqavcc;
+ u16 value;
+
+ WARN_ON(hw->mac.type != e1000_i210);
+ WARN_ON(queue < 0 || queue > 1);
+
+ if (enable) {
+ set_tx_desc_fetch_prio(hw, queue, TX_QUEUE_PRIO_HIGH);
+ set_queue_mode(hw, queue, QUEUE_MODE_STREAM_RESERVATION);
+
+ /* According to i210 datasheet section 7.2.7.7, we should set
+ * the 'idleSlope' field from TQAVCC register following the
+ * equation:
+ *
+ * For 100 Mbps link speed:
+ *
+ * value = BW * 0x7735 * 0.2 (E1)
+ *
+ * For 1000Mbps link speed:
+ *
+ * value = BW * 0x7735 * 2 (E2)
+ *
+ * E1 and E2 can be merged into one equation as shown below.
+ * Note that 'link-speed' is in Mbps.
+ *
+ * value = BW * 0x7735 * 2 * link-speed
+ * -------------- (E3)
+ * 1000
+ *
+ * 'BW' is the percentage bandwidth out of full link speed
+ * which can be found with the following equation. Note that
+ * idleSlope here is the parameter from this function which
+ * is in kbps.
+ *
+ * BW = idleSlope
+ * ----------------- (E4)
+ * link-speed * 1000
+ *
+ * That said, we can come up with a generic equation to
+ * calculate the value we should set it TQAVCC register by
+ * replacing 'BW' in E3 by E4. The resulting equation is:
+ *
+ * value = idleSlope * 0x7735 * 2 * link-speed
+ * ----------------- -------------- (E5)
+ * link-speed * 1000 1000
+ *
+ * 'link-speed' is present in both sides of the fraction so
+ * it is canceled out. The final equation is the following:
+ *
+ * value = idleSlope * 61034
+ * ----------------- (E6)
+ * 1000000
+ */
+ value = DIV_ROUND_UP_ULL(idleslope * 61034ULL, 1000000);
+
+ tqavcc = rd32(E1000_I210_TQAVCC(queue));
+ tqavcc &= ~E1000_TQAVCC_IDLESLOPE_MASK;
+ tqavcc |= value;
+ wr32(E1000_I210_TQAVCC(queue), tqavcc);
+
+ wr32(E1000_I210_TQAVHC(queue), 0x80000000 + hicredit * 0x7735);
+ } else {
+ set_tx_desc_fetch_prio(hw, queue, TX_QUEUE_PRIO_LOW);
+ set_queue_mode(hw, queue, QUEUE_MODE_STRICT_PRIORITY);
+
+ /* Set idleSlope to zero. */
+ tqavcc = rd32(E1000_I210_TQAVCC(queue));
+ tqavcc &= ~E1000_TQAVCC_IDLESLOPE_MASK;
+ wr32(E1000_I210_TQAVCC(queue), tqavcc);
+
+ /* Set hiCredit to zero. */
+ wr32(E1000_I210_TQAVHC(queue), 0);
+ }
+
+ /* XXX: In i210 controller the sendSlope and loCredit parameters from
+ * CBS are not configurable by software so we don't do any 'controller
+ * configuration' in respect to these parameters.
+ */
+
+ netdev_dbg(netdev, "CBS %s: queue %d idleslope %d sendslope %d hiCredit %d locredit %d\n",
+ (enable) ? "enabled" : "disabled", queue,
+ idleslope, sendslope, hicredit, locredit);
+}
+
+static int igb_save_cbs_params(struct igb_adapter *adapter, int queue,
+ bool enable, int idleslope, int sendslope,
+ int hicredit, int locredit)
+{
+ struct igb_ring *ring;
+
+ if (queue < 0 || queue > adapter->num_tx_queues)
+ return -EINVAL;
+
+ ring = adapter->tx_ring[queue];
+
+ ring->cbs_enable = enable;
+ ring->idleslope = idleslope;
+ ring->sendslope = sendslope;
+ ring->hicredit = hicredit;
+ ring->locredit = locredit;
+
+ return 0;
+}
+
+static bool is_any_cbs_enabled(struct igb_adapter *adapter)
+{
+ struct igb_ring *ring;
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ ring = adapter->tx_ring[i];
+
+ if (ring->cbs_enable)
+ return true;
+ }
+
+ return false;
+}
+
+static void igb_setup_tx_mode(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 val;
+
+ /* Only i210 controller supports changing the transmission mode. */
+ if (hw->mac.type != e1000_i210)
+ return;
+
+ if (is_fqtss_enabled(adapter)) {
+ int i, max_queue;
+
+ /* Configure TQAVCTRL register: set transmit mode to 'Qav',
+ * set data fetch arbitration to 'round robin' and set data
+ * transfer arbitration to 'credit shaper algorithm.
+ */
+ val = rd32(E1000_I210_TQAVCTRL);
+ val |= E1000_TQAVCTRL_XMIT_MODE | E1000_TQAVCTRL_DATATRANARB;
+ val &= ~E1000_TQAVCTRL_DATAFETCHARB;
+ wr32(E1000_I210_TQAVCTRL, val);
+
+ /* Configure Tx and Rx packet buffers sizes as described in
+ * i210 datasheet section 7.2.7.7.
+ */
+ val = rd32(E1000_TXPBS);
+ val &= ~I210_TXPBSIZE_MASK;
+ val |= I210_TXPBSIZE_PB0_8KB | I210_TXPBSIZE_PB1_8KB |
+ I210_TXPBSIZE_PB2_4KB | I210_TXPBSIZE_PB3_4KB;
+ wr32(E1000_TXPBS, val);
+
+ val = rd32(E1000_RXPBS);
+ val &= ~I210_RXPBSIZE_MASK;
+ val |= I210_RXPBSIZE_PB_32KB;
+ wr32(E1000_RXPBS, val);
+
+ /* Section 8.12.9 states that MAX_TPKT_SIZE from DTXMXPKTSZ
+ * register should not exceed the buffer size programmed in
+ * TXPBS. The smallest buffer size programmed in TXPBS is 4kB
+ * so according to the datasheet we should set MAX_TPKT_SIZE to
+ * 4kB / 64.
+ *
+ * However, when we do so, no frame from queue 2 and 3 are
+ * transmitted. It seems the MAX_TPKT_SIZE should not be great
+ * or _equal_ to the buffer size programmed in TXPBS. For this
+ * reason, we set set MAX_ TPKT_SIZE to (4kB - 1) / 64.
+ */
+ val = (4096 - 1) / 64;
+ wr32(E1000_I210_DTXMXPKTSZ, val);
+
+ /* Since FQTSS mode is enabled, apply any CBS configuration
+ * previously set. If no previous CBS configuration has been
+ * done, then the initial configuration is applied, which means
+ * CBS is disabled.
+ */
+ max_queue = (adapter->num_tx_queues < I210_SR_QUEUES_NUM) ?
+ adapter->num_tx_queues : I210_SR_QUEUES_NUM;
+
+ for (i = 0; i < max_queue; i++) {
+ struct igb_ring *ring = adapter->tx_ring[i];
+
+ igb_configure_cbs(adapter, i, ring->cbs_enable,
+ ring->idleslope, ring->sendslope,
+ ring->hicredit, ring->locredit);
+ }
+ } else {
+ wr32(E1000_RXPBS, I210_RXPBSIZE_DEFAULT);
+ wr32(E1000_TXPBS, I210_TXPBSIZE_DEFAULT);
+ wr32(E1000_I210_DTXMXPKTSZ, I210_DTXMXPKTSZ_DEFAULT);
+
+ val = rd32(E1000_I210_TQAVCTRL);
+ /* According to Section 8.12.21, the other flags we've set when
+ * enabling FQTSS are not relevant when disabling FQTSS so we
+ * don't set they here.
+ */
+ val &= ~E1000_TQAVCTRL_XMIT_MODE;
+ wr32(E1000_I210_TQAVCTRL, val);
+ }
+
+ netdev_dbg(netdev, "FQTSS %s\n", (is_fqtss_enabled(adapter)) ?
+ "enabled" : "disabled");
+}
+
/**
* igb_configure - configure the hardware for RX and TX
* @adapter: private board structure
@@ -1609,6 +1905,7 @@ static void igb_configure(struct igb_adapter *adapter)
igb_get_hw_control(adapter);
igb_set_rx_mode(netdev);
+ igb_setup_tx_mode(adapter);
igb_restore_vlan(adapter);
@@ -2150,6 +2447,55 @@ igb_features_check(struct sk_buff *skb, struct net_device *dev,
return features;
}
+static int igb_offload_cbs(struct igb_adapter *adapter,
+ struct tc_cbs_qopt_offload *qopt)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* CBS offloading is only supported by i210 controller. */
+ if (hw->mac.type != e1000_i210)
+ return -EOPNOTSUPP;
+
+ /* CBS offloading is only supported by queue 0 and queue 1. */
+ if (qopt->queue < 0 || qopt->queue > 1)
+ return -EINVAL;
+
+ err = igb_save_cbs_params(adapter, qopt->queue, qopt->enable,
+ qopt->idleslope, qopt->sendslope,
+ qopt->hicredit, qopt->locredit);
+ if (err)
+ return err;
+
+ if (is_fqtss_enabled(adapter)) {
+ igb_configure_cbs(adapter, qopt->queue, qopt->enable,
+ qopt->idleslope, qopt->sendslope,
+ qopt->hicredit, qopt->locredit);
+
+ if (!is_any_cbs_enabled(adapter))
+ enable_fqtss(adapter, false);
+
+ } else {
+ enable_fqtss(adapter, true);
+ }
+
+ return 0;
+}
+
+static int igb_setup_tc(struct net_device *dev, enum tc_setup_type type,
+ void *type_data)
+{
+ struct igb_adapter *adapter = netdev_priv(dev);
+
+ switch (type) {
+ case TC_SETUP_CBS:
+ return igb_offload_cbs(adapter, type_data);
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
static const struct net_device_ops igb_netdev_ops = {
.ndo_open = igb_open,
.ndo_stop = igb_close,
@@ -2175,6 +2521,7 @@ static const struct net_device_ops igb_netdev_ops = {
.ndo_set_features = igb_set_features,
.ndo_fdb_add = igb_ndo_fdb_add,
.ndo_features_check = igb_features_check,
+ .ndo_setup_tc = igb_setup_tc,
};
/**
--
2.14.2
Powered by blists - more mailing lists