[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171009223841.2557-12-jeffrey.t.kirsher@intel.com>
Date: Mon, 9 Oct 2017 15:38:38 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jayaprakash Shanmugam <jayaprakash.shanmugam@...el.com>,
netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 11/14] i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangs
From: Jayaprakash Shanmugam <jayaprakash.shanmugam@...el.com>
- When the I2C is busy, the PHY reads are delayed. The firmware will
return EGAIN in these cases with an expectation that the SW will
trigger the reads again
- This patch retries the operation for a maximum period of 500ms
Signed-off-by: Jayaprakash Shanmugam <jayaprakash.shanmugam@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_common.c | 42 ++++++++++++++++++---------
drivers/net/ethernet/intel/i40e/i40e_type.h | 3 ++
drivers/net/ethernet/intel/i40evf/i40e_type.h | 3 ++
3 files changed, 35 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 60542beda7ad..53aad378d49c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1567,30 +1567,46 @@ i40e_status i40e_aq_get_phy_capabilities(struct i40e_hw *hw,
struct i40e_aq_desc desc;
i40e_status status;
u16 abilities_size = sizeof(struct i40e_aq_get_phy_abilities_resp);
+ u16 max_delay = I40E_MAX_PHY_TIMEOUT, total_delay = 0;
if (!abilities)
return I40E_ERR_PARAM;
- i40e_fill_default_direct_cmd_desc(&desc,
- i40e_aqc_opc_get_phy_abilities);
+ do {
+ i40e_fill_default_direct_cmd_desc(&desc,
+ i40e_aqc_opc_get_phy_abilities);
- desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF);
- if (abilities_size > I40E_AQ_LARGE_BUF)
- desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB);
+ desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF);
+ if (abilities_size > I40E_AQ_LARGE_BUF)
+ desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB);
- if (qualified_modules)
- desc.params.external.param0 |=
+ if (qualified_modules)
+ desc.params.external.param0 |=
cpu_to_le32(I40E_AQ_PHY_REPORT_QUALIFIED_MODULES);
- if (report_init)
- desc.params.external.param0 |=
+ if (report_init)
+ desc.params.external.param0 |=
cpu_to_le32(I40E_AQ_PHY_REPORT_INITIAL_VALUES);
- status = i40e_asq_send_command(hw, &desc, abilities, abilities_size,
- cmd_details);
+ status = i40e_asq_send_command(hw, &desc, abilities,
+ abilities_size, cmd_details);
- if (hw->aq.asq_last_status == I40E_AQ_RC_EIO)
- status = I40E_ERR_UNKNOWN_PHY;
+ if (status)
+ break;
+
+ if (hw->aq.asq_last_status == I40E_AQ_RC_EIO) {
+ status = I40E_ERR_UNKNOWN_PHY;
+ break;
+ } else if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN) {
+ usleep_range(1000, 2000);
+ total_delay++;
+ status = I40E_ERR_TIMEOUT;
+ }
+ } while ((hw->aq.asq_last_status != I40E_AQ_RC_OK) &&
+ (total_delay < max_delay));
+
+ if (status)
+ return status;
if (report_init) {
if (hw->mac.type == I40E_MAC_XL710 &&
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 4b32b1d38a66..0410fcbdbb94 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -46,6 +46,9 @@
/* Max default timeout in ms, */
#define I40E_MAX_NVM_TIMEOUT 18000
+/* Max timeout in ms for the phy to respond */
+#define I40E_MAX_PHY_TIMEOUT 500
+
/* Switch from ms to the 1usec global time (this is the GTIME resolution) */
#define I40E_MS_TO_GTIME(time) ((time) * 1000)
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index 9364b67fff9c..213b773dfad6 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -46,6 +46,9 @@
/* Max default timeout in ms, */
#define I40E_MAX_NVM_TIMEOUT 18000
+/* Max timeout in ms for the phy to respond */
+#define I40E_MAX_PHY_TIMEOUT 500
+
/* Switch from ms to the 1usec global time (this is the GTIME resolution) */
#define I40E_MS_TO_GTIME(time) ((time) * 1000)
--
2.14.2
Powered by blists - more mailing lists