| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1507815262-33294-2-git-send-email-steven.lin1@broadcom.com>
Date: Thu, 12 Oct 2017 09:34:20 -0400
From: Steve Lin <steven.lin1@...adcom.com>
To: netdev@...r.kernel.org
Cc: jiri@...lanox.com, davem@...emloft.net, michael.chan@...adcom.com,
linux-pci@...r.kernel.org, linville@...driver.com,
gospo@...adcom.com, steven.lin1@...adcom.com
Subject: [RFC 1/3] devlink: Add config parameter get/set operations
Add support for config parameter get/set commands. Initially used by
bnxt driver, but other drivers can use the same, or new, attributes.
The config_get() and config_set() operations operate as expected, but
note that the driver implementation of the config_set() operation can
indicate whether a restart is necessary for the setting to take
effect.
Signed-off-by: Steve Lin <steven.lin1@...adcom.com>
Acked-by: Andy Gospodarek <gospo@...adcom.com>
---
include/net/devlink.h | 4 +
include/uapi/linux/devlink.h | 108 ++++++++++++++++++++++
net/core/devlink.c | 207 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 319 insertions(+)
diff --git a/include/net/devlink.h b/include/net/devlink.h
index b9654e1..952966c 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -270,6 +270,10 @@ struct devlink_ops {
int (*eswitch_inline_mode_set)(struct devlink *devlink, u8 inline_mode);
int (*eswitch_encap_mode_get)(struct devlink *devlink, u8 *p_encap_mode);
int (*eswitch_encap_mode_set)(struct devlink *devlink, u8 encap_mode);
+ int (*config_get)(struct devlink *devlink, enum devlink_attr attr,
+ u32 *value);
+ int (*config_set)(struct devlink *devlink, enum devlink_attr attr,
+ u32 value, u8 *restart_reqd);
};
static inline void *devlink_priv(struct devlink *devlink)
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 0cbca96..e959716 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -70,6 +70,9 @@ enum devlink_command {
DEVLINK_CMD_DPIPE_HEADERS_GET,
DEVLINK_CMD_DPIPE_TABLE_COUNTERS_SET,
+ DEVLINK_CMD_CONFIG_GET,
+ DEVLINK_CMD_CONFIG_SET,
+
/* add new commands above here */
__DEVLINK_CMD_MAX,
DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
@@ -124,6 +127,68 @@ enum devlink_eswitch_encap_mode {
DEVLINK_ESWITCH_ENCAP_MODE_BASIC,
};
+enum devlink_dcbx_mode {
+ DEVLINK_DCBX_MODE_DISABLED,
+ DEVLINK_DCBX_MODE_IEEE,
+ DEVLINK_DCBX_MODE_CEE,
+ DEVLINK_DCBX_MODE_IEEE_CEE,
+};
+
+enum devlink_multifunc_mode {
+ DEVLINK_MULTIFUNC_MODE_ALLOWED, /* Ext switch activates MF */
+ DEVLINK_MULTIFUNC_MODE_FORCE_SINGFUNC,
+ DEVLINK_MULTIFUNC_MODE_NPAR10, /* NPAR 1.0 */
+ DEVLINK_MULTIFUNC_MODE_NPAR15, /* NPAR 1.5 */
+ DEVLINK_MULTIFUNC_MODE_NPAR20, /* NPAR 2.0 */
+};
+
+enum devlink_autoneg_protocol {
+ DEVLINK_AUTONEG_PROTOCOL_IEEE8023BY_BAM,
+ DEVLINK_AUTONEG_PROTOCOL_IEEE8023BY_CONSORTIUM,
+ DEVLINK_AUTONEG_PROTOCOL_IEEE8023BY,
+ DEVLINK_AUTONEG_PROTOCOL_BAM, /* Broadcom Autoneg Mode */
+ DEVLINK_AUTONEG_PROTOCOL_CONSORTIUM, /* Consortium Autoneg Mode */
+};
+
+enum devlink_pre_os_link_speed {
+ DEVLINK_PRE_OS_LINK_SPEED_AUTONEG,
+ DEVLINK_PRE_OS_LINK_SPEED_1G,
+ DEVLINK_PRE_OS_LINK_SPEED_10G,
+ DEVLINK_PRE_OS_LINK_SPEED_25G,
+ DEVLINK_PRE_OS_LINK_SPEED_40G,
+ DEVLINK_PRE_OS_LINK_SPEED_50G,
+ DEVLINK_PRE_OS_LINK_SPEED_100G,
+ DEVLINK_PRE_OS_LINK_SPEED_5G = 0xe,
+ DEVLINK_PRE_OS_LINK_SPEED_100M = 0xf,
+};
+
+enum devlink_mba_boot_type {
+ DEVLINK_MBA_BOOT_TYPE_AUTO_DETECT,
+ DEVLINK_MBA_BOOT_TYPE_BBS, /* BIOS Boot Specification */
+ DEVLINK_MBA_BOOT_TYPE_INTR18, /* Hook interrupt 0x18 */
+ DEVLINK_MBA_BOOT_TYPE_INTR19, /* Hook interrupt 0x19 */
+};
+
+enum devlink_mba_setup_hot_key {
+ DEVLINK_MBA_SETUP_HOT_KEY_CTRL_S,
+ DEVLINK_MBA_SETUP_HOT_KEY_CTRL_B,
+};
+
+enum devlink_mba_boot_protocol {
+ DEVLINK_MBA_BOOT_PROTOCOL_PXE,
+ DEVLINK_MBA_BOOT_PROTOCOL_ISCSI,
+ DEVLINK_MBA_BOOT_PROTOCOL_NONE = 0x7,
+};
+
+enum devlink_mba_link_speed {
+ DEVLINK_MBA_LINK_SPEED_AUTONEG,
+ DEVLINK_MBA_LINK_SPEED_1G,
+ DEVLINK_MBA_LINK_SPEED_10G,
+ DEVLINK_MBA_LINK_SPEED_25G,
+ DEVLINK_MBA_LINK_SPEED_40G,
+ DEVLINK_MBA_LINK_SPEED_50G,
+};
+
enum devlink_attr {
/* don't change the order or add anything between, this is ABI! */
DEVLINK_ATTR_UNSPEC,
@@ -202,6 +267,49 @@ enum devlink_attr {
DEVLINK_ATTR_ESWITCH_ENCAP_MODE, /* u8 */
+ /* Configuration Parameters */
+ DEVLINK_ATTR_SRIOV_ENABLED, /* u8 */
+ DEVLINK_ATTR_NUM_VF_PER_PF, /* u32 */
+ DEVLINK_ATTR_MAX_NUM_PF_MSIX_VECT, /* u32 */
+ DEVLINK_ATTR_MSIX_VECTORS_PER_VF, /* u32 */
+ DEVLINK_ATTR_NPAR_NUM_PARTITIONS_PER_PORT, /* u32 */
+ DEVLINK_ATTR_NPAR_BW_IN_PERCENT, /* u8 */
+ DEVLINK_ATTR_NPAR_BW_RESERVATION, /* u8 */
+ DEVLINK_ATTR_NPAR_BW_RESERVATION_VALID, /* u8 */
+ DEVLINK_ATTR_NPAR_BW_LIMIT, /* u8 */
+ DEVLINK_ATTR_NPAR_BW_LIMIT_VALID, /* u8 */
+ DEVLINK_ATTR_DCBX_MODE, /* u8 */
+ DEVLINK_ATTR_RDMA_ENABLED, /* u8 */
+ DEVLINK_ATTR_MULTIFUNC_MODE, /* u8 */
+ DEVLINK_ATTR_SECURE_NIC_ENABLED, /* u8 */
+ DEVLINK_ATTR_IGNORE_ARI_CAPABILITY, /* u8 */
+ DEVLINK_ATTR_LLDP_NEAREST_BRIDGE_ENABLED, /* u8 */
+ DEVLINK_ATTR_LLDP_NEAREST_NONTPMR_BRIDGE_ENABLED, /* u8 */
+ DEVLINK_ATTR_PME_CAPABILITY_ENABLED, /* u8 */
+ DEVLINK_ATTR_MAGIC_PACKET_WOL_ENABLED, /* u8 */
+ DEVLINK_ATTR_EEE_PWR_SAVE_ENABLED, /* u8 */
+ DEVLINK_ATTR_AUTONEG_PROTOCOL, /* u8 */
+ DEVLINK_ATTR_MEDIA_AUTO_DETECT, /* u8 */
+ DEVLINK_ATTR_PHY_SELECT, /* u8 */
+ DEVLINK_ATTR_PRE_OS_LINK_SPEED_D0, /* u8 */
+ DEVLINK_ATTR_PRE_OS_LINK_SPEED_D3, /* u8 */
+ DEVLINK_ATTR_MBA_ENABLED, /* u8 */
+ DEVLINK_ATTR_MBA_BOOT_TYPE, /* u8 */
+ DEVLINK_ATTR_MBA_DELAY_TIME, /* u32 */
+ DEVLINK_ATTR_MBA_SETUP_HOT_KEY, /* u8 */
+ DEVLINK_ATTR_MBA_HIDE_SETUP_PROMPT, /* u8 */
+ DEVLINK_ATTR_MBA_BOOT_RETRY_COUNT, /* u32 */
+ DEVLINK_ATTR_MBA_VLAN_ENABLED, /* u8 */
+ DEVLINK_ATTR_MBA_VLAN_TAG, /* u16 */
+ DEVLINK_ATTR_MBA_BOOT_PROTOCOL, /* u8 */
+ DEVLINK_ATTR_MBA_LINK_SPEED, /* u8 */
+
+ /* When config doesn't take effect until next reboot (config
+ * just changed NVM which isn't read until boot, for example),
+ * this attribute should be set by the driver.
+ */
+ DEVLINK_ATTR_RESTART_REQUIRED, /* u8 */
+
/* add new attributes above here, update the policy in devlink.c */
__DEVLINK_ATTR_MAX,
diff --git a/net/core/devlink.c b/net/core/devlink.c
index 7d430c1..701c84b 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -1566,6 +1566,164 @@ static int devlink_nl_cmd_eswitch_set_doit(struct sk_buff *skb,
return 0;
}
+static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1];
+
+static int devlink_nl_config_fill(struct sk_buff *msg,
+ struct devlink *devlink,
+ enum devlink_command cmd,
+ struct genl_info *info)
+{
+ const struct devlink_ops *ops = devlink->ops;
+ void *hdr;
+ int err;
+ enum devlink_attr attr = -1;
+ u32 value;
+ int i;
+ struct nla_policy policy;
+ u8 restart_reqd;
+
+ if (!ops->config_get)
+ return -EOPNOTSUPP;
+
+ hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq,
+ &devlink_nl_family, 0, cmd);
+ if (!hdr) {
+ err = -EMSGSIZE;
+ goto nla_msg_failure;
+ }
+
+ err = devlink_nl_put_handle(msg, devlink);
+ if (err)
+ goto nla_put_failure;
+
+ for (i = 0; i < DEVLINK_ATTR_MAX; i++)
+ if (info->attrs[i])
+ attr = i;
+
+ if (attr == -1) {
+ /* Not found - invalid/unknown attribute? */
+ err = -EINVAL;
+ goto nla_put_failure;
+ }
+
+ policy = devlink_nl_policy[attr];
+
+ if (cmd == DEVLINK_CMD_CONFIG_GET) {
+ err = ops->config_get(devlink, attr, &value);
+
+ if (err)
+ goto nla_put_failure;
+
+ switch (policy.type) {
+ case NLA_U8:
+ err = nla_put_u8(msg, attr, value);
+ break;
+ case NLA_U16:
+ err = nla_put_u16(msg, attr, value);
+ break;
+ case NLA_U32:
+ err = nla_put_u32(msg, attr, value);
+ break;
+ default:
+ goto nla_put_failure;
+ }
+
+ if (err)
+ goto nla_put_failure;
+ } else {
+ /* Must be config_set command */
+ u8 *val8;
+ u16 *val16;
+ u32 *val32;
+
+ switch (policy.type) {
+ case NLA_U8:
+ val8 = nla_data(info->attrs[attr]);
+ value = *val8;
+ break;
+ case NLA_U16:
+ val16 = nla_data(info->attrs[attr]);
+ value = *val16;
+ break;
+ case NLA_U32:
+ val32 = nla_data(info->attrs[attr]);
+ value = *val32;
+ break;
+ default:
+ goto nla_put_failure;
+ }
+
+ err = ops->config_set(devlink, attr, value, &restart_reqd);
+ if (err)
+ goto nla_put_failure;
+
+ if (restart_reqd) {
+ err = nla_put_u8(msg, DEVLINK_ATTR_RESTART_REQUIRED,
+ restart_reqd);
+ if (err)
+ goto nla_put_failure;
+ }
+ }
+
+ genlmsg_end(msg, hdr);
+ return 0;
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+nla_msg_failure:
+ return err;
+}
+
+static int devlink_nl_cmd_config_get_doit(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct devlink *devlink = info->user_ptr[0];
+ struct sk_buff *msg;
+ int err;
+
+ if (!devlink->ops)
+ return -EOPNOTSUPP;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ err = devlink_nl_config_fill(msg, devlink, DEVLINK_CMD_CONFIG_GET,
+ info);
+
+ if (err) {
+ nlmsg_free(msg);
+ return err;
+ }
+
+ return genlmsg_reply(msg, info);
+}
+
+static int devlink_nl_cmd_config_set_doit(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct devlink *devlink = info->user_ptr[0];
+ struct sk_buff *msg;
+ int err;
+
+ if (!devlink->ops)
+ return -EOPNOTSUPP;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ err = devlink_nl_config_fill(msg, devlink, DEVLINK_CMD_CONFIG_SET,
+ info);
+
+ if (err) {
+ nlmsg_free(msg);
+ return err;
+ }
+
+ return genlmsg_reply(msg, info);
+}
+
int devlink_dpipe_match_put(struct sk_buff *skb,
struct devlink_dpipe_match *match)
{
@@ -2291,6 +2449,41 @@ static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1] = {
[DEVLINK_ATTR_ESWITCH_ENCAP_MODE] = { .type = NLA_U8 },
[DEVLINK_ATTR_DPIPE_TABLE_NAME] = { .type = NLA_NUL_STRING },
[DEVLINK_ATTR_DPIPE_TABLE_COUNTERS_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_SRIOV_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_NUM_VF_PER_PF] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MAX_NUM_PF_MSIX_VECT] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MSIX_VECTORS_PER_VF] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_NPAR_NUM_PARTITIONS_PER_PORT] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_NPAR_BW_IN_PERCENT] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_NPAR_BW_RESERVATION] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_NPAR_BW_RESERVATION_VALID] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_NPAR_BW_LIMIT] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_NPAR_BW_LIMIT_VALID] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_DCBX_MODE] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_RDMA_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_MULTIFUNC_MODE] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_SECURE_NIC_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_IGNORE_ARI_CAPABILITY] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_LLDP_NEAREST_BRIDGE_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_LLDP_NEAREST_NONTPMR_BRIDGE_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_PME_CAPABILITY_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_MAGIC_PACKET_WOL_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_EEE_PWR_SAVE_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_AUTONEG_PROTOCOL] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MEDIA_AUTO_DETECT] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_PHY_SELECT] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_PRE_OS_LINK_SPEED_D0] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_PRE_OS_LINK_SPEED_D3] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MBA_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_MBA_BOOT_TYPE] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MBA_DELAY_TIME] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MBA_SETUP_HOT_KEY] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MBA_HIDE_SETUP_PROMPT] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_MBA_BOOT_RETRY_COUNT] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MBA_VLAN_ENABLED] = { .type = NLA_U8 },
+ [DEVLINK_ATTR_MBA_VLAN_TAG] = { .type = NLA_U16 },
+ [DEVLINK_ATTR_MBA_BOOT_PROTOCOL] = { .type = NLA_U32 },
+ [DEVLINK_ATTR_MBA_LINK_SPEED] = { .type = NLA_U32 },
};
static const struct genl_ops devlink_nl_ops[] = {
@@ -2451,6 +2644,20 @@ static const struct genl_ops devlink_nl_ops[] = {
.flags = GENL_ADMIN_PERM,
.internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
},
+ {
+ .cmd = DEVLINK_CMD_CONFIG_GET,
+ .doit = devlink_nl_cmd_config_get_doit,
+ .policy = devlink_nl_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
+ },
+ {
+ .cmd = DEVLINK_CMD_CONFIG_SET,
+ .doit = devlink_nl_cmd_config_set_doit,
+ .policy = devlink_nl_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
+ },
};
static struct genl_family devlink_nl_family __ro_after_init = {
--
2.7.4
Powered by blists - more mailing lists