netdev - Re: Ethtool question

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <59DFE275.3050805@candelatech.com>
Date:   Thu, 12 Oct 2017 14:45:25 -0700
From:   Ben Greear <greearb@...delatech.com>
To:     David Miller <davem@...emloft.net>, linville@...driver.com
CC:     netdev@...r.kernel.org
Subject: Re: Ethtool question

On 10/11/2017 01:49 PM, David Miller wrote:
> From: "John W. Linville" <linville@...driver.com>
> Date: Wed, 11 Oct 2017 16:44:07 -0400
>
>> On Wed, Oct 11, 2017 at 09:51:56AM -0700, Ben Greear wrote:
>>> I noticed today that setting some ethtool settings to the same value
>>> returns an error code.  I would think this should silently return
>>> success instead?  Makes it easier to call it from scripts this way:
>>>
>>> [root@...313-6477 lanforge]# ethtool -L eth3 combined 1
>>> combined unmodified, ignoring
>>> no channel parameters changed, aborting
>>> current values: tx 0 rx 0 other 1 combined 1
>>> [root@...313-6477 lanforge]# echo $?
>>> 1
>>
>> I just had this discussion a couple of months ago with someone. My
>> initial feeling was like you, a no-op is not a failure. But someone
>> convinced me otherwise...I will now endeavour to remember who that
>> was and how they convinced me...
>>
>> Anyone else have input here?
>
> I guess this usually happens when drivers don't support changing the
> settings at all.  So they just make their ethtool operation for the
> 'set' always return an error.
>
> We could have a generic ethtool helper that does "get" and then if the
> "set" request is identical just return zero.
>
> But from another perspective, the error returned from the "set" in this
> situation also indicates to the user that the driver does not support
> the "set" operation which has value and meaning in and of itself.  And
> we'd lose that with the given suggestion.

In my case, the driver (igb) does support the set, my program just made the same
ethtool call several times and it fails after the initial change (that actually
changes something), as best as I can figure.

Thanks,
Ben

-- 
Ben Greear <greearb@...delatech.com>
Candela Technologies Inc  http://www.candelatech.com