Date:   Mon, 16 Oct 2017 15:05:29 +0800
From:   Yunsheng Lin <linyunsheng@...wei.com>
To:     Yuval Mintz <yuvalm@...lanox.com>,
        "davem@...emloft.net" <davem@...emloft.net>
CC:     "huangdaode@...ilicon.com" <huangdaode@...ilicon.com>,
        "xuwei5@...ilicon.com" <xuwei5@...ilicon.com>,
        "liguozhu@...ilicon.com" <liguozhu@...ilicon.com>,
        "Yisen.Zhuang@...wei.com" <Yisen.Zhuang@...wei.com>,
        "gabriele.paoloni@...wei.com" <gabriele.paoloni@...wei.com>,
        "john.garry@...wei.com" <john.garry@...wei.com>,
        "linuxarm@...wei.com" <linuxarm@...wei.com>,
        "salil.mehta@...wei.com" <salil.mehta@...wei.com>,
        "lipeng321@...wei.com" <lipeng321@...wei.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next 0/2] Add mqprio hardware offload support in hns3
 driver

Hi, Yuval

On 2017/10/16 14:25, Yuval Mintz wrote:
>> Hi, Yuval
>>
>> On 2017/10/15 13:14, Yuval Mintz wrote:
>>>> Hi, Yuval
>>>>
>>>> On 2017/10/13 4:21, Yuval Mintz wrote:
>>>>>> This patchset adds a new hardware offload type in mqprio before
>> adding
>>>>>> mqprio hardware offload support in hns3 driver.
>>>>>
>>>>> I think one of the biggest issues in tying this to DCB configuration is the
>>>>> non-immediate [and possibly non persistent] configuration.
>>>>>
>>>>> Scenario #1:
>>>>> User is configuring mqprio offloaded with 3 TCs while device is in willing
>>>> mode.
>>>>> Would you expect the driver to immediately respond with a success or
>>>> instead
>>>>> delay the return until the DCBx negotiation is complete and the
>> operational
>>>>> num of TCs is actually 3?
>>>>
>>>> Well, when user requsts the mqprio offloaded by a hardware shared by
>> DCB,
>>>> I expect
>>>> the user is not using the dcb tool.
>>>> If user is still using dcb tool, then result is undefined.
>>>>
>>>> The scenario you mention maybe can be enforced by setting willing to
>> zero
>>>> when user
>>>> is requesting the mqprio offload, and restore the willing bit when
>> unloaded
>>>> the mqprio
>>>> offload.
>>>
>>> Sounds a bit harsh but would probably work.
>>>
>>>> But I think the real issue is that dcb and mqprio shares the tc system in the
>>>> stack,
>>>> the problem may be better to be fixed in the stack rather than in the
>> driver,
>>>> as you
>>>> suggested in the DCB patchset. What do you think?
>>>
>>> What did you have in mind?
>>
>> I was thinking maybe the tc system can provide a notification to mqprio and
>> dcb.
>> mqprio and dcb register a callback to the tc system, when there is some
>> change of
>> tc configuration, the tc system call the callback from mqprio and dcb.
>>
>>>
>>>>
>>>>>
>>>>> Scenario #2:
>>>>> Assume user explicitly offloaded mqprio with 3 TCs, but now DCB
>>>> configuration
>>>>> has changed on the peer side and 4 TCs is the new negotiated
>> operational
>>>> value.
>>>>> Your current driver logic would change the number of TCs underneath
>> the
>>>> user
>>>>> configuration [and it would actually probably work due to mqprio being a
>>>> crappy
>>>>> qdisc]. But was that the user actual intention?
>>>>> [I think the likely answer in this scenario is 'yes' since the alternative is no
>>>> better.
>>>>> But I still thought it was worth mentioning]
>>>>
>>>> You are right, the problem also have something to do with mqprio and dcb
>>>> sharing
>>>> the tc in the stack.
>>>>
>>>> Druing testing, when user explicitly offloaded mqprio with 3 TCs, all
>>>> queue has a default pfifo mqprio attached, after DCB changes the tc num
>> to
>>>> 4,
>>>> using tc qdisc shows some queue does not have a default pfifo mqprio
>>>> attached.
>>>
>>> Really? Then what did it show?
>>> [I assume it has some pfifo attached, and it's an mqprio dump kind of an
>> issue]
>>
>> When queue size of the ndev is 16 and tc num is 3, we set the real queue size
>> to
>> 15 ( 5 * 3 = 15), mqprio only attach pfifo to the first 15 queue, when tc num
>> change
>> to 4 by DCB, we set the real queue size to 16 (4 * 4 = 16).
>> So tc qdisc shows the last queue has no qdisc attached.
> 
> So there is a qdisc attached - mqprio_attach() attches to all transmission
> queues [num_tx_queues] and not only the active ones.
> But the flow for mqprio might be lacking the additional qdisc_hash_add()
> for the additional queue's qdisc.

Yes, I think you may be right.

static void mqprio_attach(struct Qdisc *sch)
{
	struct net_device *dev = qdisc_dev(sch);
	struct mqprio_sched *priv = qdisc_priv(sch);
	struct Qdisc *qdisc, *old;
	unsigned int ntx;

	/* Attach underlying qdisc */
	for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
		qdisc = priv->qdiscs[ntx];
		old = dev_graft_qdisc(qdisc->dev_queue, qdisc);
		if (old)
			qdisc_destroy(old);

----------Only call qdisc_hash_add when  ntx < dev->real_num_tx_queues---------------

		if (ntx < dev->real_num_tx_queues)
			qdisc_hash_add(qdisc, false);
	}
	kfree(priv->qdiscs);
	priv->qdiscs = NULL;
}


> 
>>
>>>
>>>>
>>>> Maybe we can add a callback to notify mqprio the configuration has
>> changed.
>>>>
>>>
>>> Which would do what?
>>> You already have the notifications available for monitoring using dcbnl logic
>> if the
>>> configuration change [for user]; So user can re-configure whatever it
>> wants.
>>
>> Yes, if user is only using dcb tool.
>>
>>> But other than dropping all the qdisc configurations and going back to the
>> default
>>> qdiscs, what default action would mqprio be able to do when configuration
>> changes
>>> that actually makes sense?
>>
>> As explained above, after dcb changing the configuration, some queue may
>> have no qdisc
>> attached, so I was thinking maybe we can add pfifo to it if there is no qdsic
>> attached
>> to it.
>>
>> Thanks,
>> Yunsheng Lin
>>
>>>
>>>> Thanks
>>>> Yunsheng Lin
>>>>
>>>>>
>>>>> Cheers,
>>>>> Yuval
>>>>>
>>>>>>
>>>>>> Yunsheng Lin (2):
>>>>>>   mqprio: Add a new hardware offload type in mqprio
>>>>>>   net: hns3: Add mqprio hardware offload support in hns3 driver
>>>>>>
>>>>>>  drivers/net/ethernet/hisilicon/hns3/hnae3.h        |  1 +
>>>>>>  .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 23
>> +++++++++++
>>>>>>  .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 46
>>>> ++++++++++++++-
>>>>>> -------
>>>>>>  include/uapi/linux/pkt_sched.h                     |  1 +
>>>>>>  4 files changed, 55 insertions(+), 16 deletions(-)
>>>>>>
>>>>>> --
>>>>>> 1.9.1
>>>>>
>>>>>
>>>>>
>>>
> 

Powered by blists - more mailing lists