netdev - [PATCH net] net: stmmac: First Queue must always be in DCB mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <d0f29981af9cfc700709af274acd7dba4b2014a7.1509008601.git.joabreu@synopsys.com>
Date:   Thu, 26 Oct 2017 10:07:12 +0100
From:   Jose Abreu <Jose.Abreu@...opsys.com>
To:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Jose Abreu <Jose.Abreu@...opsys.com>,
        Joao Pinto <Joao.Pinto@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>
Subject: [PATCH net] net: stmmac: First Queue must always be in DCB mode

According to DWMAC databook the first queue operating mode
must always be in DCB.

As MTL_QUEUE_DCB = 1, we need to always set the first queue
operating mode to DCB otherwise driver will think that queue
is in AVB mode (because MTL_QUEUE_AVB = 0).

Signed-off-by: Jose Abreu <joabreu@...opsys.com>
Cc: Joao Pinto <jpinto@...opsys.com>
Cc: David S. Miller <davem@...emloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 21f59fe..603225b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -150,6 +150,13 @@ static void stmmac_mtl_setup(struct platform_device *pdev,
 	plat->rx_queues_to_use = 1;
 	plat->tx_queues_to_use = 1;
 
+	/* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need
+	 * to always set this, otherwise Queue will be classified as AVB
+	 * (because MTL_QUEUE_AVB = 0).
+	 */
+	plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
+	plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
+
 	rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0);
 	if (!rx_node)
 		return;
-- 
1.9.1