lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3176678f-5e6b-daed-dfca-5e3cfb4b84ac@intel.com>
Date:   Thu, 26 Oct 2017 14:10:41 -0700
From:   "Nambiar, Amritha" <amritha.nambiar@...el.com>
To:     Shannon Nelson <shannon.nelson@...cle.com>,
        intel-wired-lan@...osl.org
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [Intel-wired-lan] [jkirsher/next-queue PATCH v4 3/6] i40e: Cloud
 filter mode for set_switch_config command

On 10/11/2017 4:30 PM, Shannon Nelson wrote:
> On 10/10/2017 5:24 PM, Amritha Nambiar wrote:
>> Add definitions for L4 filters and switch modes based on cloud filters
>> modes and extend the set switch config command to include the
>> additional cloud filter mode.
>>
>> Signed-off-by: Amritha Nambiar <amritha.nambiar@...el.com>
>> Signed-off-by: Kiran Patil <kiran.patil@...el.com>
>> ---
>>   drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h |   30 ++++++++++++++++++++-
>>   drivers/net/ethernet/intel/i40e/i40e_common.c     |    4 ++-
>>   drivers/net/ethernet/intel/i40e/i40e_ethtool.c    |    2 +
>>   drivers/net/ethernet/intel/i40e/i40e_main.c       |    2 +
>>   drivers/net/ethernet/intel/i40e/i40e_prototype.h  |    2 +
>>   drivers/net/ethernet/intel/i40e/i40e_type.h       |    9 ++++++
>>   6 files changed, 44 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
>> index 6a5db1b..729976b 100644
>> --- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
>> +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
>> @@ -790,7 +790,35 @@ struct i40e_aqc_set_switch_config {
>>   	 */
>>   	__le16	first_tag;
>>   	__le16	second_tag;
>> -	u8	reserved[6];
>> +	/* Next byte is split into following:
>> +	 * Bit 7 : 0: No action, 1: Switch to mode defined by bits 6:0
>> +	 * Bit 6: 0 : Destination Port, 1: source port
>> +	 * Bit 5..4: L4 type
> 
> Can you tweak the formatting on these comments to line up the first 
> couple of ':'s?
> 
>> +	 * 0: rsvd
>> +	 * 1: TCP
>> +	 * 2: UDP
>> +	 * 3: Both TCP and UDP
>> +	 * Bits 3:0 Mode
>> +	 * 0: default mode
>> +	 * 1: L4 port only mode
>> +	 * 2: non-tunneled mode
>> +	 * 3: tunneled mode
>> +	 */
>> +#define I40E_AQ_SET_SWITCH_BIT7_VALID		0x80
>> +
>> +#define I40E_AQ_SET_SWITCH_L4_SRC_PORT		0x40
>> +
>> +#define I40E_AQ_SET_SWITCH_L4_TYPE_RSVD		0x00
>> +#define I40E_AQ_SET_SWITCH_L4_TYPE_TCP		0x10
>> +#define I40E_AQ_SET_SWITCH_L4_TYPE_UDP		0x20
>> +#define I40E_AQ_SET_SWITCH_L4_TYPE_BOTH		0x30
>> +
>> +#define I40E_AQ_SET_SWITCH_MODE_DEFAULT		0x00
>> +#define I40E_AQ_SET_SWITCH_MODE_L4_PORT		0x01
>> +#define I40E_AQ_SET_SWITCH_MODE_NON_TUNNEL	0x02
>> +#define I40E_AQ_SET_SWITCH_MODE_TUNNEL		0x03
>> +	u8	mode;
>> +	u8	rsvd5[5];
>>   };
>>   
>>   I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
>> index 1b85eb3..0b3c5b7 100644
>> --- a/drivers/net/ethernet/intel/i40e/i40e_common.c
>> +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
>> @@ -2402,13 +2402,14 @@ i40e_status i40e_aq_get_switch_config(struct i40e_hw *hw,
>>    * @hw: pointer to the hardware structure
>>    * @flags: bit flag values to set
>>    * @valid_flags: which bit flags to set
>> + * @mode: cloud filter mode
>>    * @cmd_details: pointer to command details structure or NULL
>>    *
>>    * Set switch configuration bits
>>    **/
>>   enum i40e_status_code i40e_aq_set_switch_config(struct i40e_hw *hw,
>>   						u16 flags,
>> -						u16 valid_flags,
>> +						u16 valid_flags, u8 mode,
>>   				struct i40e_asq_cmd_details *cmd_details)
>>   {
>>   	struct i40e_aq_desc desc;
>> @@ -2420,6 +2421,7 @@ enum i40e_status_code i40e_aq_set_switch_config(struct i40e_hw *hw,
>>   					  i40e_aqc_opc_set_switch_config);
>>   	scfg->flags = cpu_to_le16(flags);
>>   	scfg->valid_flags = cpu_to_le16(valid_flags);
>> +	scfg->mode = mode;
>>   	if (hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) {
>>   		scfg->switch_tag = cpu_to_le16(hw->switch_tag);
>>   		scfg->first_tag = cpu_to_le16(hw->first_tag);
>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
>> index a760d75..37ca294 100644
>> --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
>> +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
>> @@ -4341,7 +4341,7 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
>>   			sw_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
>>   		valid_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
>>   		ret = i40e_aq_set_switch_config(&pf->hw, sw_flags, valid_flags,
>> -						NULL);
>> +						0, NULL);
>>   		if (ret && pf->hw.aq.asq_last_status != I40E_AQ_RC_ESRCH) {
>>   			dev_info(&pf->pdev->dev,
>>   				 "couldn't set switch config bits, err %s aq_err %s\n",
>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
>> index 33a8f429..0539d43 100644
>> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
>> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
>> @@ -12165,7 +12165,7 @@ static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
>>   		u16 valid_flags;
>>   
>>   		valid_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
>> -		ret = i40e_aq_set_switch_config(&pf->hw, flags, valid_flags,
>> +		ret = i40e_aq_set_switch_config(&pf->hw, flags, valid_flags, 0,
>>   						NULL);
>>   		if (ret && pf->hw.aq.asq_last_status != I40E_AQ_RC_ESRCH) {
>>   			dev_info(&pf->pdev->dev,
>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
>> index 0150256..92869f5 100644
>> --- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
>> +++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
>> @@ -190,7 +190,7 @@ i40e_status i40e_aq_get_switch_config(struct i40e_hw *hw,
>>   				struct i40e_asq_cmd_details *cmd_details);
>>   enum i40e_status_code i40e_aq_set_switch_config(struct i40e_hw *hw,
>>   						u16 flags,
>> -						u16 valid_flags,
>> +						u16 valid_flags, u8 mode,
>>   				struct i40e_asq_cmd_details *cmd_details);
>>   i40e_status i40e_aq_request_resource(struct i40e_hw *hw,
>>   				enum i40e_aq_resources_ids resource,
>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
>> index 17a99b5..24589a4 100644
>> --- a/drivers/net/ethernet/intel/i40e/i40e_type.h
>> +++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
>> @@ -283,6 +283,15 @@ struct i40e_hw_capabilities {
>>   #define I40E_NVM_IMAGE_TYPE_CLOUD	0x2
>>   #define I40E_NVM_IMAGE_TYPE_UDP_CLOUD	0x3
>>   
>> +	/* Cloud filter modes:
>> +	 * Mode1: Filter on L4 port only
>> +	 * Mode2: Filter for non-tunneled traffic
>> +	 * Mode3: Filter for tunnel traffic
>> +	 */
>> +#define I40E_NVM_IMAGE_TYPE_MODE1	0x6
>> +#define I40E_NVM_IMAGE_TYPE_MODE2	0x7
>> +#define I40E_NVM_IMAGE_TYPE_MODE3	0x8
> 
> These names aren't very descriptive... out of context these look like 
> they are describing NVM image types, not message filter types.

I will address all your comments in v5. I'm thinking of changing these
names to I40E_CLOUD_FILTER_MODEX.

> 
>> +
>>   	u32  management_mode;
>>   	u32  mng_protocols_over_mctp;
>>   #define I40E_MNG_PROTOCOL_PLDM		0x2
>>
>> _______________________________________________
>> Intel-wired-lan mailing list
>> Intel-wired-lan@...osl.org
>> https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
>>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ