netdev - [PATCH net-next 2/3] net: dsa: b53: Stop using dev->cpu

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20171109222606.2987-3-f.fainelli@gmail.com>
Date:   Thu,  9 Nov 2017 14:26:05 -0800
From:   Florian Fainelli <f.fainelli@...il.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, andrew@...n.ch,
        vivien.didelot@...oirfairelinux.com,
        Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 2/3] net: dsa: b53: Stop using dev->cpu_port incorrectly

dev->cpu_port is the driver local information that should only be used
to look up register offsets for a particular port, when they differ
(e.g: IMP port override), but it should certainly not be used in place
of the DSA configured CPU port.

Since the DSA switch layer calls port_vlan_{add,del}() on the CPU port
as well, we can remove the specific setting of the CPU port within
port_vlan_{add,del}.

Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/net/dsa/b53/b53_common.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a7ca62ba27b7..5e48e98b6187 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -325,7 +325,6 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
 
 static void b53_set_forwarding(struct b53_device *dev, int enable)
 {
-	struct dsa_switch *ds = dev->ds;
 	u8 mgmt;
 
 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
@@ -505,7 +504,7 @@ EXPORT_SYMBOL(b53_imp_vlan_setup);
 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	struct b53_device *dev = ds->priv;
-	unsigned int cpu_port = dev->cpu_port;
+	unsigned int cpu_port = ds->ports[port].cpu_dp->index;
 	u16 pvlan;
 
 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
@@ -1054,7 +1053,6 @@ void b53_vlan_add(struct dsa_switch *ds, int port,
 	struct b53_device *dev = ds->priv;
 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
 	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
-	unsigned int cpu_port = dev->cpu_port;
 	struct b53_vlan *vl;
 	u16 vid;
 
@@ -1063,12 +1061,11 @@ void b53_vlan_add(struct dsa_switch *ds, int port,
 
 		b53_get_vlan_entry(dev, vid, vl);
 
-		vl->members |= BIT(port) | BIT(cpu_port);
+		vl->members |= BIT(port);
 		if (untagged)
 			vl->untag |= BIT(port);
 		else
 			vl->untag &= ~BIT(port);
-		vl->untag &= ~BIT(cpu_port);
 
 		b53_set_vlan_entry(dev, vid, vl);
 		b53_fast_age_vlan(dev, vid);
@@ -1432,8 +1429,8 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
 		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
 	} else {
 		b53_get_vlan_entry(dev, pvid, vl);
-		vl->members |= BIT(port) | BIT(dev->cpu_port);
-		vl->untag |= BIT(port) | BIT(dev->cpu_port);
+		vl->members |= BIT(port) | BIT(cpu_port);
+		vl->untag |= BIT(port) | BIT(cpu_port);
 		b53_set_vlan_entry(dev, pvid, vl);
 	}
 }
-- 
2.9.3