lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1510563806-8012-1-git-send-email-liuhangbin@gmail.com>
Date:   Mon, 13 Nov 2017 17:03:26 +0800
From:   Hangbin Liu <liuhangbin@...il.com>
To:     netdev@...r.kernel.org
Cc:     Eric Garver <e@...g.me>, Pravin B Shelar <pshelar@....org>,
        "David S. Miller" <davem@...emloft.net>,
        Jiri Benc <jbenc@...hat.com>,
        Hangbin Liu <liuhangbin@...il.com>
Subject: [PATCH net] geneve: show remote address and checksum info even after link down

geneve->sock4/6 were added with geneve_open and released with geneve_stop.
So when geneve link down, we will not able to show remote address and
checksum info after commit 11387fe4a98 ("geneve: fix fill_info when using
collect_metadata").

Fix this by reset back to the previous behavior: only show the corresponding
remote address and always show checksum info.

Fixes: 11387fe4a98 ("geneve: fix fill_info when using collect_metadata")
Signed-off-by: Hangbin Liu <liuhangbin@...il.com>
---
 drivers/net/geneve.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index ed51018..b010db7 100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -1511,32 +1511,18 @@ static int geneve_fill_info(struct sk_buff *skb, const struct net_device *dev)
 	if (nla_put_u32(skb, IFLA_GENEVE_ID, vni))
 		goto nla_put_failure;
 
-	if (rtnl_dereference(geneve->sock4)) {
+	if (ip_tunnel_info_af(info) == AF_INET) {
 		if (nla_put_in_addr(skb, IFLA_GENEVE_REMOTE,
 				    info->key.u.ipv4.dst))
 			goto nla_put_failure;
 
-		if (nla_put_u8(skb, IFLA_GENEVE_UDP_CSUM,
-			       !!(info->key.tun_flags & TUNNEL_CSUM)))
-			goto nla_put_failure;
-
-	}
-
 #if IS_ENABLED(CONFIG_IPV6)
-	if (rtnl_dereference(geneve->sock6)) {
+	} else {
 		if (nla_put_in6_addr(skb, IFLA_GENEVE_REMOTE6,
 				     &info->key.u.ipv6.dst))
 			goto nla_put_failure;
-
-		if (nla_put_u8(skb, IFLA_GENEVE_UDP_ZERO_CSUM6_TX,
-			       !(info->key.tun_flags & TUNNEL_CSUM)))
-			goto nla_put_failure;
-
-		if (nla_put_u8(skb, IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
-			       !geneve->use_udp6_rx_checksums))
-			goto nla_put_failure;
-	}
 #endif
+	}
 
 	if (nla_put_u8(skb, IFLA_GENEVE_TTL, info->key.ttl) ||
 	    nla_put_u8(skb, IFLA_GENEVE_TOS, info->key.tos) ||
@@ -1550,6 +1536,14 @@ static int geneve_fill_info(struct sk_buff *skb, const struct net_device *dev)
 		if (nla_put_flag(skb, IFLA_GENEVE_COLLECT_METADATA))
 			goto nla_put_failure;
 	}
+
+	if (nla_put_u8(skb, IFLA_GENEVE_UDP_CSUM,
+		       !!(info->key.tun_flags & TUNNEL_CSUM)) ||
+	    nla_put_u8(skb, IFLA_GENEVE_UDP_ZERO_CSUM6_TX,
+		       !(info->key.tun_flags & TUNNEL_CSUM)) ||
+	    nla_put_u8(skb, IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
+		       !geneve->use_udp6_rx_checksums))
+		goto nla_put_failure;
 	return 0;
 
 nla_put_failure:
-- 
2.5.5

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ