[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171128141304.GE20797@lunn.ch>
Date: Tue, 28 Nov 2017 15:13:04 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Madalin-cristian Bucur <madalin.bucur@....com>
Cc: Bhaskar Upadhaya <bhaskar.upadhaya@....com>,
"f.fainelli@...il.com" <f.fainelli@...il.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Shengzhou Liu <shengzhou.liu@....com>,
York Sun <york.sun@....com>,
"u-boot@...ts.denx.de" <u-boot@...ts.denx.de>,
Anji Jagarlmudi <anji.jagarlmudi@....com>,
Calvin Johnson <calvin.johnson@....com>,
Poonam Aggrwal <poonam.aggrwal@....com>,
Prabhakar Kushwaha <prabhakar.kushwaha@....com>
Subject: Re: [RFC] Support for SGMII 2500
> Hi Andrew,
>
> Bhaskar is working on enabling a PFE [1] MAC connected to an Aquantia AQR107
> PHY [2] on a LS1012AQDS board. Initially I've indicated 2500Base-X too, but it
> seems the HW actually works in SGMII mode. The QDS boards are lower volume,
> higher spec boards than the RDBs [3], they exercise most of the HW capabilities.
The webpage for the AQR107 lists 2500Base-X, so i assume the issue is
with the MAC? Ideally you want to use 2500Base-X, since this is wider
known.
Anyway, you seem to have a legitimate need for it.
However, i would prefer a different name. The convention is to put the
number first. So PHY_INTERFACE_MODE_2500SGMII.
Andrew
Powered by blists - more mailing lists