[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171130195744.17743-1-f.fainelli@gmail.com>
Date: Thu, 30 Nov 2017 11:57:39 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, andrew@...n.ch, rmk+kernel@...linux.org.uk,
vivien.didelot@...oirfairelinux.com,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 0/5] PHYLINK preparatory patches for DSA
Hi all,
In preparation for having DSA migrate to PHYLINK, I had to come up with a
number of preparatory patches:
- we need to be able to pass phy_flags from an external component calling
phylink_of_phy_connect()
- DSA tries to connect through OF first, then fallsback using its own internal
MDIO bus, in that case we would both show an error, but also not know what
the correct phy_interface_t would be, instead use the PHY device/driver provided
one
- Finally bcm_sf2 makes use of all possible PHYs out there: internal, external,
fixed, and MoCA, the latter requires a bit of help to signal link notifications
through a MMIO interrupt, as well a report a correct PORT type
Florian Fainelli (5):
net: phy: phylink: Allow specifying PHY device flags
net: phy: phylink: Use PHY device interface if N/A
net: phy: phylink: Demote error message to debug
net: phy: phylink: Allow setting a custom link state callback
net: phy: phylink: Report MoCA as PORT_BNC
drivers/net/phy/phylink.c | 45 +++++++++++++++++++++++++++++++++++++++------
include/linux/phylink.h | 5 ++++-
2 files changed, 43 insertions(+), 7 deletions(-)
--
2.14.3
Powered by blists - more mailing lists