[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c0bb020ffcf3448988217ecf05137472@IL-EXCH01.marvell.com>
Date: Thu, 30 Nov 2017 08:51:21 +0000
From: Yan Markman <ymarkman@...vell.com>
To: Russell King - ARM Linux <linux@...linux.org.uk>
CC: Antoine Tenart <antoine.tenart@...e-electrons.com>,
"andrew@...n.ch" <andrew@...n.ch>,
"f.fainelli@...il.com" <f.fainelli@...il.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"gregory.clement@...e-electrons.com"
<gregory.clement@...e-electrons.com>,
"thomas.petazzoni@...e-electrons.com"
<thomas.petazzoni@...e-electrons.com>,
"miquel.raynal@...e-electrons.com" <miquel.raynal@...e-electrons.com>,
"Nadav Haklai" <nadavh@...vell.com>,
"mw@...ihalf.com" <mw@...ihalf.com>,
"Stefan Chulski" <stefanc@...vell.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [EXT] Re: [PATCH net] net: phylink: fix link state on phy-connect
The phylink_stop is called before phylink_disconnect_phy
You could see in mvpp2.c:
mvpp2_stop_dev() {
phylink_stop(port->phylink);
}
mvpp2_stop() {
mvpp2_stop_dev(port);
phylink_disconnect_phy(port->phylink);
}
.ndo_stop = mvpp2_stop,
-----Original Message-----
From: Russell King - ARM Linux [mailto:linux@...linux.org.uk]
Sent: Wednesday, November 29, 2017 11:21 PM
To: Yan Markman <ymarkman@...vell.com>
Cc: Antoine Tenart <antoine.tenart@...e-electrons.com>; andrew@...n.ch; f.fainelli@...il.com; davem@...emloft.net; gregory.clement@...e-electrons.com; thomas.petazzoni@...e-electrons.com; miquel.raynal@...e-electrons.com; Nadav Haklai <nadavh@...vell.com>; mw@...ihalf.com; Stefan Chulski <stefanc@...vell.com>; netdev@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: Re: [EXT] Re: [PATCH net] net: phylink: fix link state on phy-connect
On Wed, Nov 29, 2017 at 09:06:56PM +0000, Yan Markman wrote:
> The attached p21 patch doesn't change anything.
> But another one from the mail-text is good
> void phylink_disconnect_phy(struct phylink *pl)
> + pl->phy_state.link = false;
>
> There still (not for my MRVL-PP2) problem:
> It is expected that on ifconfig-down the callback
> pl->ops->mac_link_down(ndev, pl->link_an_mode); would be called, but
> it isn't
Are you calling phylink_stop() or are you just calling phylink_disconnect() ?
You must call phylink_stop() prior to phylink_disconnect(). This probably explains why the p21 patch did nothing.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up According to speedtest.net: 8.21Mbps down 510kbps up
Powered by blists - more mailing lists