lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <baca694c-9265-afa2-5807-3101244a0ef4@st.com>
Date:   Sat, 2 Dec 2017 14:19:36 +0100
From:   Giuseppe CAVALLARO <peppe.cavallaro@...com>
To:     Bhadram Varka <vbhadram@...dia.com>,
        "Joao.Pinto@...opsys.com" <Joao.Pinto@...opsys.com>
CC:     linux-netdev <netdev@...r.kernel.org>
Subject: Re: NETDEV WATCHDOG: eth0 (dwc-eth-dwmac): transmit queue 1 timed out

Ok Bhadram

thx for this check, I was afraid that the HW FIFO had some issues.

Best Regards
Peppe

On 12/1/2017 4:39 PM, Bhadram Varka wrote:
> Hi Giuseppe,
>
> I don't see any issue with if we execute "ping -s 1400" case. I believe in this case TSO not triggered.
>
> Thanks,
> Bhadram.
>
> -----Original Message-----
> From: Giuseppe CAVALLARO [mailto:peppe.cavallaro@...com]
> Sent: Thursday, November 23, 2017 11:58 AM
> To: Bhadram Varka <vbhadram@...dia.com>; Joao.Pinto@...opsys.com
> Cc: linux-netdev <netdev@...r.kernel.org>
> Subject: Re: NETDEV WATCHDOG: eth0 (dwc-eth-dwmac): transmit queue 1 timed out
>
> Hi Bhadram
>
> you said that  In normal ping scenario this is not observed, I wonder if you could try for example, ping with -s 1400. In that case, if still fail I think the issue could be the FIFO tuning and I expect overflow on RX MMC counters.
>
> Let me know
> Regards,
> Peppe
>
> On 11/20/2017 3:22 PM, Bhadram Varka wrote:
>> Hi Giuseppe,
>>
>> Thanks for responding.
>>
>> Actually I am using net-next tree for making the changes. Below patches already present in code base.
>>
>> a0daae1 net: stmmac: Disable flow ctrl for RX AVB queues and really
>> enable TX AVB queues
>> 52a7623 net: stmmac: Use correct values in TQS/RQS fields
>>
>> Thanks,
>> Bhadram.
>>
>> -----Original Message-----
>> From: Giuseppe CAVALLARO [mailto:peppe.cavallaro@...com]
>> Sent: Monday, November 20, 2017 6:37 PM
>> To: Bhadram Varka <vbhadram@...dia.com>; Joao.Pinto@...opsys.com
>> Cc: linux-netdev <netdev@...r.kernel.org>
>> Subject: Re: NETDEV WATCHDOG: eth0 (dwc-eth-dwmac): transmit queue 1
>> timed out
>>
>> Hello Bhadram
>>
>> there are some new patches actually in net/net-next repo that you should have; for example:
>>
>>       [PATCH net-next v2 0/2] net: stmmac: Improvements for
>> multi-queuing and for AVB
>>
>> Let me know if these help you.
>>
>> Regards
>> Peppe
>>
>> On 11/20/2017 7:38 AM, Bhadram Varka wrote:
>>> Hi Joao/Peppe,
>>>
>>> Observed this issue more frequently with multi-channel case. Am I missing something in DT ?
>>> Please help here to understand the issue.
>>>
>>> Thanks,
>>> Bhadram
>>>
>>> -----Original Message-----
>>> From: Bhadram Varka
>>> Sent: Thursday, November 16, 2017 9:41 AM
>>> To: linux-netdev <netdev@...r.kernel.org>
>>> Subject: NETDEV WATCHDOG: eth0 (dwc-eth-dwmac): transmit queue 1
>>> timed out
>>>
>>> Hi,
>>>
>>> I am trying to enable multi-queue in Tegra186 EQOS (which has support for 4 channels). Observed below netdev watchdog warning. Its easily reproable with iperf test.
>>> In normal ping scenario this is not observed. I did not observe any issue if we disable TSO. Looks like issue in stmmac_tso_xmit() in multi-channel scenario.
>>>
>>> [   88.801672] NETDEV WATCHDOG: eth0 (dwc-eth-dwmac): transmit queue 0 timed out
>>> [   88.808818] ------------[ cut here ]------------
>>> [   88.813435] WARNING: CPU: 5 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x2cc/0x2d8
>>> [   88.821681] Modules linked in: dwmac_dwc_qos_eth stmmac_platform crc32_ce crct10dif_ce stmmac ip_tables x_tables ipv6
>>> [   88.832290] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G S              4.14.0-rc7-01956-g9395db5-dirty #21
>>> [   88.841663] Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
>>> [   88.848697] task: ffff8001ec8fd400 task.stack: ffff000009e38000
>>> [   88.854606] PC is at dev_watchdog+0x2cc/0x2d8
>>> [   88.858952] LR is at dev_watchdog+0x2cc/0x2d8
>>> [   88.863300] pc : [<ffff00000894a76c>] lr : [<ffff00000894a76c>] pstate: 20000145
>>> [   88.870678] sp : ffff00000802bd80
>>> [   88.873983] x29: ffff00000802bd80 x28: 00000000000000a0
>>> [   88.879287] x27: 00000000ffffffff x26: ffff8001eae2c3b0
>>> [   88.884589] x25: 0000000000000005 x24: ffff8001ecb6be80
>>> [   88.889891] x23: ffff8001eae2c39c x22: ffff8001eae2bfb0
>>> [   88.895192] x21: ffff8001eae2c000 x20: ffff000008fe7000
>>> [   88.900493] x19: 0000000000000001 x18: 0000000000000010
>>> [   88.905795] x17: 0000000000000000 x16: 0000000000000000
>>> [   88.911098] x15: ffffffffffffffff x14: 756f2064656d6974
>>> [   88.916399] x13: 2031206575657571 x12: ffff000008fe9df0
>>> [   88.921699] x11: ffff000008586180 x10: 642d6874652d6377
>>> [   88.927000] x9 : 0000000000000016 x8 : 3a474f4448435441
>>> [   88.932301] x7 : 572056454454454e x6 : 000000000000014f
>>> [   88.937602] x5 : 0000000000000020 x4 : 0000000000000000
>>> [   88.942902] x3 : 0000000000000000 x2 : ffff000008fec4c0
>>> [   88.948203] x1 : ffff8001ec8fd400 x0 : 0000000000000041
>>> [   88.953504] Call trace:
>>> [   88.955944] Exception stack(0xffff00000802bc40 to 0xffff00000802bd80)
>>> [   88.962371] bc40: 0000000000000041 ffff8001ec8fd400 ffff000008fec4c0 0000000000000000
>>> [   88.970184] bc60: 0000000000000000 0000000000000020 000000000000014f 572056454454454e
>>> [   88.977998] bc80: 3a474f4448435441 0000000000000016 642d6874652d6377 ffff000008586180
>>> [   88.985811] bca0: ffff000008fe9df0 2031206575657571 756f2064656d6974 ffffffffffffffff
>>> [   88.993624] bcc0: 0000000000000000 0000000000000000 0000000000000010 0000000000000001
>>> [   89.001439] bce0: ffff000008fe7000 ffff8001eae2c000 ffff8001eae2bfb0 ffff8001eae2c39c
>>> [   89.009252] bd00: ffff8001ecb6be80 0000000000000005 ffff8001eae2c3b0 00000000ffffffff
>>> [   89.017065] bd20: 00000000000000a0 ffff00000802bd80 ffff00000894a76c ffff00000802bd80
>>> [   89.024879] bd40: ffff00000894a76c 0000000020000145 ffff000000b67570 0000000000000001
>>> [   89.032693] bd60: 0001000000000000 ffff8001ecb6b200 ffff00000802bd80 ffff00000894a76c
>>> [   89.040508] [<ffff00000894a76c>] dev_watchdog+0x2cc/0x2d8
>>> [   89.045900] [<ffff000008130d1c>] call_timer_fn.isra.5+0x24/0x80
>>> [   89.051809] [<ffff000008130e1c>] expire_timers+0xa4/0xb0
>>> [   89.057111] [<ffff000008130f68>] run_timer_softirq+0x140/0x170
>>> [   89.062933] [<ffff00000808196c>] __do_softirq+0x12c/0x228
>>> [   89.068323] [<ffff0000080ce180>] irq_exit+0xd0/0x108
>>> [   89.073278] [<ffff00000811a180>] __handle_domain_irq+0x60/0xb8
>>> [   89.079098] [<ffff000008081670>] gic_handle_irq+0x58/0xa8
>>> [   89.084484] Exception stack(0xffff000009e3be20 to 0xffff000009e3bf60)
>>> [   89.090910] be20: 0000000000000000 0000000000000000 0000000000000001 0000000000000000
>>> [   89.098724] be40: 0000000000000000 ffff000009e3bf60 00008001ecffd000 0000000000000001
>>> [   89.106537] be60: 0000000000000002 ffff000009e3bee0 0000000000000a00 0000000000000000
>>> [   89.114351] be80: 0000000000000001 0000000000000000 001c3dfbd9959589 00001daf5b7a4860
>>> [   89.122164] bea0: ffff00000825b000 0000000000000000 0000ffffc0311284 ffff000008fc5000
>>> [   89.129978] bec0: ffff000008fe9000 ffff000008fe9000 ffff000008fd04a0 ffff000008fe9e90
>>> [   89.137792] bee0: 0000000000000000 0000000000000000 ffff8001ec8fd400 0000000000000000
>>> [   89.145605] bf00: 0000000000000000 ffff000009e3bf60 ffff00000808548c ffff000009e3bf60
>>> [   89.153418] bf20: ffff000008085490 0000000000000145 0000000000000000 0000000000000000
>>> [   89.161231] bf40: ffffffffffffffff ffff0000081409c4 ffff000009e3bf60 ffff000008085490
>>> [   89.169044] [<ffff0000080830f0>] el1_irq+0xb0/0x124
>>> [   89.173912] [<ffff000008085490>] arch_cpu_idle+0x10/0x18
>>> [   89.179213] [<ffff000008105f10>] do_idle+0x120/0x1e0
>>> [   89.184166] [<ffff00000810616c>] cpu_startup_entry+0x24/0x28
>>> [   89.189814] [<ffff00000808f1c8>] secondary_start_kernel+0x110/0x120
>>> [   89.196067] ---[ end trace 039d403d63546b77 ]---
>>>     
>>> Below are the DT changes -
>>>
>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
>>> b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
>>> index 0b0552c..ffe1b80 100644
>>> --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
>>> +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
>>> @@ -27,21 +27,40 @@
>>>                    #gpio-cells = <2>;
>>>                    gpio-controller;
>>>            };
>>> +
>>> +       mtl_tx_setup: tx-queues-config {
>>> +               snps,tx-queues-to-use = <0x4>;
>>> +               snps,tx-sched-sp;
>>> +               queue0 {
>>> +                       snps,weight = <0x10>;
>>> +                       snps,dcb-algorithm;
>>> +                       snps,priority = <0x0>;
>>> +               };
>>> +               queue1 {
>>> +                       snps,avb-algorithm;
>>> +                       snps,send_slope = <0x1000>;
>>> +                       snps,idle_slope = <0x1000>;
>>> +                       snps,high_credit = <0x3E800>;
>>> +                       snps,low_credit = <0xFFC18000>;
>>> +                       snps,priority = <0x1>;
>>> +               };
>>> +       };
>>> +
>>> +       mtl_rx_setup: rx-queues-config {
>>> +               snps,rx-queues-to-use = <0x4>;
>>> +               snps,rx-sched-sp;
>>> +               queue0 {
>>> +                       snps,dcb-algorithm;
>>> +                       snps,map-to-dma-channel = <0x0>;
>>> +                       snps,priority = <0x0>;
>>> +               };
>>> +       };
>>>           ethernet@...0000 {
>>>                    compatible = "nvidia,tegra186-eqos",
>>>                                 "snps,dwc-qos-ethernet-4.10";
>>>                    reg = <0x0 0x02490000 0x0 0x10000>; @@ -57,6 +76,10 @@
>>>                    snps,burst-map = <0x7>;
>>>                    snps,txpbl = <32>;
>>>                    snps,rxpbl = <8>;
>>> +
>>> +               snps,mtl-tx-config = <&mtl_tx_setup>;
>>> +               snps,mtl-rx-config = <&mtl_rx_setup>;
>>>
>> ----------------------------------------------------------------------
>> ------------- This email message is for the sole use of the intended
>> recipient(s) and may contain confidential information.  Any
>> unauthorized review, use, disclosure or distribution is prohibited.
>> If you are not the intended recipient, please contact the sender by
>> reply email and destroy all copies of the original message.
>> ----------------------------------------------------------------------
>> -------------
>>
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ