[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1512452116-14795-4-git-send-email-shannon.nelson@oracle.com>
Date: Mon, 4 Dec 2017 21:35:09 -0800
From: Shannon Nelson <shannon.nelson@...cle.com>
To: intel-wired-lan@...ts.osuosl.org, jeffrey.t.kirsher@...el.com
Cc: steffen.klassert@...unet.com, sowmini.varadhan@...cle.com,
netdev@...r.kernel.org
Subject: [next-queue 03/10] ixgbe: add ipsec engine start and stop routines
Add in the code for running and stopping the hardware ipsec
encryption/decryption engine. It is good to keep the engine
off when not in use in order to save on the power draw.
Signed-off-by: Shannon Nelson <shannon.nelson@...cle.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 140 +++++++++++++++++++++++++
1 file changed, 140 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index 14dd011..38a1a16 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -148,10 +148,150 @@ void ixgbe_ipsec_clear_hw_tables(struct ixgbe_adapter *adapter)
}
/**
+ * ixgbe_ipsec_stop_data
+ * @adapter: board private structure
+ **/
+static void ixgbe_ipsec_stop_data(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ bool link = adapter->link_up;
+ u32 t_rdy, r_rdy;
+ u32 reg;
+
+ /* halt data paths */
+ reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
+ reg |= IXGBE_SECTXCTRL_TX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ reg |= IXGBE_SECRXCTRL_RX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg);
+
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* If the tx fifo doesn't have link, but still has data,
+ * we can't clear the tx sec block. Set the MAC loopback
+ * before block clear
+ */
+ if (!link) {
+ reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ reg |= IXGBE_MACC_FLU;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ reg |= IXGBE_HLREG0_LPBK;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg);
+
+ IXGBE_WRITE_FLUSH(hw);
+ mdelay(3);
+ }
+
+ /* wait for the paths to empty */
+ do {
+ mdelay(10);
+ t_rdy = IXGBE_READ_REG(hw, IXGBE_SECTXSTAT) &
+ IXGBE_SECTXSTAT_SECTX_RDY;
+ r_rdy = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT) &
+ IXGBE_SECRXSTAT_SECRX_RDY;
+ } while (!t_rdy && !r_rdy);
+
+ /* undo loopback if we played with it earlier */
+ if (!link) {
+ reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ reg &= ~IXGBE_MACC_FLU;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ reg &= ~IXGBE_HLREG0_LPBK;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg);
+
+ IXGBE_WRITE_FLUSH(hw);
+ }
+}
+
+/**
+ * ixgbe_ipsec_stop_engine
+ * @adapter: board private structure
+ **/
+static void ixgbe_ipsec_stop_engine(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 reg;
+
+ ixgbe_ipsec_stop_data(adapter);
+
+ /* disable Rx and Tx SA lookup */
+ IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, 0);
+ IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, 0);
+
+ /* disable the Rx and Tx engines and full packet store-n-forward */
+ reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
+ reg |= IXGBE_SECTXCTRL_SECTX_DIS;
+ reg &= ~IXGBE_SECTXCTRL_STORE_FORWARD;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ reg |= IXGBE_SECRXCTRL_SECRX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg);
+
+ /* restore the "tx security buffer almost full threshold" to 0x250 */
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, 0x250);
+
+ /* Set minimum IFG between packets back to the default 0x1 */
+ reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
+ reg = (reg & 0xfffffff0) | 0x1;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
+
+ /* final set for normal (no ipsec offload) processing */
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_SECTX_DIS);
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, IXGBE_SECRXCTRL_SECRX_DIS);
+
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_ipsec_start_engine
+ * @adapter: board private structure
+ *
+ * NOTE: this increases power consumption whether being used or not
+ **/
+static void ixgbe_ipsec_start_engine(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 reg;
+
+ ixgbe_ipsec_stop_data(adapter);
+
+ /* Set minimum IFG between packets to 3 */
+ reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
+ reg = (reg & 0xfffffff0) | 0x3;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
+
+ /* Set "tx security buffer almost full threshold" to 0x15 so that the
+ * almost full indication is generated only after buffer contains at
+ * least an entire jumbo packet.
+ */
+ reg = IXGBE_READ_REG(hw, IXGBE_SECTXBUFFAF);
+ reg = (reg & 0xfffffc00) | 0x15;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, reg);
+
+ /* restart the data paths by clearing the DISABLE bits */
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, 0);
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_STORE_FORWARD);
+
+ /* enable Rx and Tx SA lookup */
+ IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, IXGBE_RXTXIDX_IPS_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, IXGBE_RXTXIDX_IPS_EN);
+
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
* ixgbe_init_ipsec_offload - initialize security registers for IPSec operation
* @adapter: board private structure
**/
void ixgbe_init_ipsec_offload(struct ixgbe_adapter *adapter)
{
ixgbe_ipsec_clear_hw_tables(adapter);
+ ixgbe_ipsec_stop_engine(adapter);
}
--
2.7.4
Powered by blists - more mailing lists