netdev - Re: Waiting for the PHY to complete auto-negotiation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20171206182633.GP27063@lunn.ch>
Date:   Wed, 6 Dec 2017 19:26:33 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Mason <slash.tmp@...e.fr>
Cc:     netdev <netdev@...r.kernel.org>,
        Florian Fainelli <f.fainelli@...il.com>,
        David Miller <davem@...emloft.net>
Subject: Re: Waiting for the PHY to complete auto-negotiation

> The problem with this is the following mind-boggling quirk of
> the hardware: once RX DMA is enabled, there is no supported
> way to disable it! Thus, I'm trying to find a clean way to set
> the control flow parameter BEFORE enabling the MAC.

There is no solution. I can pull the cable out, and plug it into a
different computer. The first could use flow control, the second not.

If you cannot disable RX DMA, you should probably disable unloading of
the module. Also kexec.

    Andrew