netdev - Re: [PATCH] ARM64: dts: meson-axg: add ethernet mac controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <7hy3mfr572.fsf@baylibre.com>
Date:   Wed, 06 Dec 2017 12:07:13 -0800
From:   Kevin Hilman <khilman@...libre.com>
To:     Yixun Lan <yixun.lan@...ogic.com>
Cc:     <devicetree@...r.kernel.org>,
        Neil Armstrong <narmstrong@...libre.com>,
        Jerome Brunet <jbrunet@...libre.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Carlo Caione <carlo@...one.org>,
        <linux-amlogic@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: Re: [PATCH] ARM64: dts: meson-axg: add ethernet mac controller

Yixun Lan <yixun.lan@...ogic.com> writes:

> Add DT info for the stmmac ethernet MAC which found in
> the Amlogic's Meson-AXG SoC, also describe the ethernet
> pinctrl & clock information here.
>
> This is tested in the S400 dev board which use a RTL8211F PHY,
> and the pins connect to the 'eth_rgmii_y_pins' group.
>
> Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>

This doesn't apply cleanly to mainline.  Are there some dependencies
here that I'm not aware of?

Also...

> ---
>  arch/arm64/boot/dts/amlogic/meson-axg-s400.dts |  7 ++++
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi     | 53 ++++++++++++++++++++++++++
>  2 files changed, 60 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> index 9eb6aaee155d..7b39a9fe2b0f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> @@ -21,3 +21,10 @@
>  	status = "okay";
>  };
>  
> +&ethmac {
> +	status = "okay";
> +	phy-mode = "rgmii";
> +
> +	pinctrl-0 = <&eth_rgmii_y_pins>;
> +	pinctrl-names = "default";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index 65945c6c8b65..57faaa9d8013 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -157,6 +157,19 @@
>  			#address-cells = <0>;
>  		};
>  
> +		ethmac: ethernet@...f0000 {
> +			compatible = "amlogic,meson-axg-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";

The new "meson-axg-dwmac" is not documented in the binding.  Can you add
that?

Kevin