netdev - Re: [PATCH] net: dsa: allow XAUI phy interface mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20171208162643.GD30846@lunn.ch>
Date:   Fri, 8 Dec 2017 17:26:43 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Russell King <rmk+kernel@...linux.org.uk>
Cc:     Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
        Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org
Subject: Re: [PATCH] net: dsa: allow XAUI phy interface mode

On Fri, Dec 08, 2017 at 04:04:59PM +0000, Russell King wrote:
> XGMII is a 32-bit bus plus two clock signals per direction.  XAUI is
> four serial lanes per direction.  The 88e6190 supports XAUI but not
> XGMII as it doesn't have enough pins.  The same is true of 88e6176.
> 
> Match on PHY_INTERFACE_MODE_XAUI for the XAUI port type, but keep
> accepting XGMII for backwards compatibility.

Hi Russell

The backwards compatibility is for the ZII devel C, the DSA link
between the two switches? I don't think there are any other boards
using this.

I will ask around, but i don't think we need to worry about backwards
compatibility. There is no region of flash set aside for the DT blob,
etc. I always TFTP boot using the one from the kernel, etc.

  Andrew