[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VI1PR0401MB2271295D92FA847415BED57FFF350@VI1PR0401MB2271.eurprd04.prod.outlook.com>
Date: Wed, 13 Dec 2017 02:21:04 +0000
From: Andy Duan <fugang.duan@....com>
To: Richard Leitner <dev@...l1n.net>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"andrew@...n.ch" <andrew@...n.ch>,
"f.fainelli@...il.com" <f.fainelli@...il.com>,
"frowand.list@...il.com" <frowand.list@...il.com>
CC: "davem@...emloft.net" <davem@...emloft.net>,
"geert+renesas@...der.be" <geert+renesas@...der.be>,
"sergei.shtylyov@...entembedded.com"
<sergei.shtylyov@...entembedded.com>,
"baruch@...s.co.il" <baruch@...s.co.il>,
"david.wu@...k-chips.com" <david.wu@...k-chips.com>,
"lukma@...x.de" <lukma@...x.de>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"richard.leitner@...data.com" <richard.leitner@...data.com>
Subject: RE: [PATCH net-next v5 0/4] net: fec: fix refclk enable for SMSC
LAN8710/20
From: Richard Leitner <dev@...l1n.net> Sent: Monday, December 11, 2017 8:17 PM
>This patch series fixes the use of the SMSC LAN8710/20 with a Freescale ETH
>when the refclk is generated by the FSL.
>
>This patchset depends on the "phylib: Add device reset GPIO support" patch
>submitted by Geert Uytterhoeven/Sergei Shtylyov, which was merged to net-
>next as commit bafbdd527d56 ("phylib: Add device reset GPIO support").
>
>Changes v5:
> - fix reset delay calculation (max_t instead of min_t)
>
>Changes v4:
> - simplify dts parsing
> - simplify reset delay evaluation and execution
> - fec: ensure to only reset once during fec_enet_open()
> - remove dependency notes from commit message
> - add reviews and acks
>
>Changes v3:
> - use phylib to hard-reset the PHY
> - implement reset delays in phylib
> - add new phylib API & flag (PHY_RST_AFTER_CLK_EN) to determine if
> a PHY is affected
>
>Changes v2:
> - simplify and fix fec_reset_phy function to support multiple calls
> - include: linux: phy: harmonize phy_id{,_mask} type
> - reset the phy instead of not turning the clock on and off
> (which would have caused a power consumption regression)
>
>Richard Leitner (4):
> phylib: Add device reset delay support
> phylib: add reset after clk enable support
> net: phy: smsc: LAN8710/20: add PHY_RST_AFTER_CLK_EN flag
> net: fec: add phy_reset_after_clk_enable() support
>
> Documentation/devicetree/bindings/net/phy.txt | 10 ++++++++++
> drivers/net/ethernet/freescale/fec_main.c | 20 ++++++++++++++++++++
> drivers/net/phy/mdio_device.c | 13 +++++++++++--
> drivers/net/phy/phy_device.c | 24 ++++++++++++++++++++++++
> drivers/net/phy/smsc.c | 2 +-
> drivers/of/of_mdio.c | 4 ++++
> include/linux/mdio.h | 2 ++
> include/linux/phy.h | 2 ++
> 8 files changed, 74 insertions(+), 3 deletions(-)
>
>--
>2.11.0
The series look fine better. Thanks.
Acked-by: Fugang Duan <fugang.duan@....com>
Powered by blists - more mailing lists