netdev - [PATCH net-next v3] ip6_vti: adjust vti mtu according to mtu of output device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1513265870-29851-1-git-send-email-alexey.kodanev@oracle.com>
Date:   Thu, 14 Dec 2017 18:37:50 +0300
From:   Alexey Kodanev <alexey.kodanev@...cle.com>
To:     netdev@...r.kernel.org
Cc:     Steffen Klassert <steffen.klassert@...unet.com>,
        David Miller <davem@...emloft.net>,
        Petr Vorel <pvorel@...e.cz>,
        Shannon Nelson <shannon.nelson@...cle.com>,
        Alexey Kodanev <alexey.kodanev@...cle.com>
Subject: [PATCH net-next v3] ip6_vti: adjust vti mtu according to mtu of output device

LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams that
require fragmentation and the underlying device has MTU <= 1500. This
happens because ip6_vti sets mtu to ETH_DATA_LEN and not updating it
depending on a destination address or link parameter.

Further attempts to send UDP packets may succeed because pmtu gets
updated on ICMPV6_PKT_TOOBIG in vti6_err().

Here is the example when the output device MTU is set to 9000:

  # ip a sh ltp_ns_veth2
      ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ...
        inet 10.0.0.2/24 scope global ltp_ns_veth2
        inet6 fd00::2/64 scope global

  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@...E: <POINTOPOINT,NOARP> mtu 1500 ...
        link/tunnel6 fd00::2 peer fd00::1

After the patch:
  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@...E: <POINTOPOINT,NOARP> mtu 8832 ...
        link/tunnel6 fd00::2 peer fd00::1

Regarding ip_vti, it already tunes MTU with ip_tunnel_bind_dev().

Reported-by: Petr Vorel <pvorel@...e.cz>
Signed-off-by: Alexey Kodanev <alexey.kodanev@...cle.com>
Acked-by: Shannon Nelson <shannon.nelson@...cle.com>
---
v3: * fix style issue with curly braces around single-statement if block

v2: * cleanup commit message issues (thanks to Shannon)

    * handle the case when we don't have route but have device parameter

    * cast new MTU to int and then check the maximum (tdev->mtu can be
      less than dev->hard_header_len)

 net/ipv6/ip6_vti.c |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index dbb74f3..5404443 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -626,6 +626,7 @@ static void vti6_link_config(struct ip6_tnl *t)
 {
 	struct net_device *dev = t->dev;
 	struct __ip6_tnl_parm *p = &t->parms;
+	struct net_device *tdev = NULL;
 
 	memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
 	memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
@@ -638,6 +639,26 @@ static void vti6_link_config(struct ip6_tnl *t)
 		dev->flags |= IFF_POINTOPOINT;
 	else
 		dev->flags &= ~IFF_POINTOPOINT;
+
+	if (p->flags & IP6_TNL_F_CAP_XMIT) {
+		int strict = (ipv6_addr_type(&p->raddr) &
+			      (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL));
+
+		struct rt6_info *rt = rt6_lookup(t->net,
+						 &p->raddr, &p->laddr,
+						 p->link, strict);
+
+		if (rt)
+			tdev = rt->dst.dev;
+		ip6_rt_put(rt);
+	}
+
+	if (!tdev && p->link)
+		tdev = __dev_get_by_index(t->net, p->link);
+
+	if (tdev)
+		dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len,
+				 IPV6_MIN_MTU);
 }
 
 /**
-- 
1.7.1