[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7749e13a-56ef-0d43-1a41-dbd457227575@gmail.com>
Date: Thu, 14 Dec 2017 15:24:17 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>,
David Miller <davem@...emloft.net>, netdev@...r.kernel.org
Cc: Andrew Lunn <andrew@...n.ch>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>
Subject: Re: [PATCH net-next v6 1/2] dt-bindings: net: add DT bindings for
Socionext UniPhier AVE
On 12/14/2017 02:05 AM, Kunihiko Hayashi wrote:
> DT bindings for the AVE ethernet controller found on Socionext's
> UniPhier platforms.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
> Signed-off-by: Jassi Brar <jaswinder.singh@...aro.org>
> Acked-by: Rob Herring <robh@...nel.org>
> ---
> .../bindings/net/socionext,uniphier-ave4.txt | 48 ++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
>
> diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
> new file mode 100644
> index 0000000..4700377
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
> @@ -0,0 +1,48 @@
> +* Socionext AVE ethernet controller
> +
> +This describes the devicetree bindings for AVE ethernet controller
> +implemented on Socionext UniPhier SoCs.
> +
> +Required properties:
> + - compatible: Should be
> + - "socionext,uniphier-pro4-ave4" : for Pro4 SoC
> + - "socionext,uniphier-pxs2-ave4" : for PXs2 SoC
> + - "socionext,uniphier-ld11-ave4" : for LD11 SoC
> + - "socionext,uniphier-ld20-ave4" : for LD20 SoC
> + - reg: Address where registers are mapped and size of region.
> + - interrupts: Should contain the MAC interrupt.
> + - phy-mode: See ethernet.txt in the same directory. Allow to choose
> + "rgmii", "rmii", or "mii" according to the PHY.
> + - phy-handle: Should point to the external phy device.
> + See ethernet.txt file in the same directory.
> + - clocks: A phandle to the clock for the MAC.
> +
> +Optional properties:
> + - resets: A phandle to the reset control for the MAC
> + - local-mac-address: See ethernet.txt in the same directory.
> +
> +Required subnode:
> + - mdio: Device tree subnode with the following required properties:
> + - #address-cells: Must be <1>.
> + - #size-cells: Must be <0>.
> + - reg: phy ID number, usually a small integer.
Almost, the "reg" property applies to the MDIO child nodes: the Ethernet
PHYs/MDIO devices. For the MDIO controller itself, the "reg" property,
if specified, would be relative to the Ethernet controller's base
register address.
Please drop this property's description here.
> +
> +Example:
> +
> + ether: ethernet@...00000 {
> + compatible = "socionext,uniphier-ld20-ave4";
> + reg = <0x65000000 0x8500>;
> + interrupts = <0 66 4>;
> + phy-mode = "rgmii";
> + phy-handle = <ðphy>;
> + clocks = <&sys_clk 6>;
> + resets = <&sys_rst 6>;
> + local-mac-address = [00 00 00 00 00 00];
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ethphy: ethphy@1 {
> + reg = <1>;
> + };
> + };
> + };
>
--
Florian
Powered by blists - more mailing lists