[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <224de02be0821bae18f5060f6cfd60d8caf02b8b.1513242414.git.igor.russkikh@aquantia.com>
Date: Thu, 14 Dec 2017 12:34:46 +0300
From: Igor Russkikh <igor.russkikh@...antia.com>
To: "David S . Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, David Arcari <darcari@...hat.com>,
Pavel Belous <pavel.belous@...antia.com>,
Nadezhda Krupnina <Nadezhda.Krupnina@...antia.com>,
Simon Edelhaus <simon.edelhaus@...antia.com>,
Igor Russkikh <igor.russkikh@...antia.com>
Subject: [PATCH net v3 7/9] net: aquantia: Update hw counters on hw init
On very first start we should read out current HW counter values
to make diff based calculations later.
This also should be done each time NIC gets down/up or wakes up
after sleep state. We reset link state explicitly to prevent diffs
from being summed this first time.
Signed-off-by: Igor Russkikh <igor.russkikh@...antia.com>
---
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 4 ++++
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c
index b0abd18..f18dce14 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c
@@ -344,6 +344,10 @@ static int hw_atl_a0_hw_init(struct aq_hw_s *self,
hw_atl_a0_hw_rss_set(self, &aq_nic_cfg->aq_rss);
hw_atl_a0_hw_rss_hash_set(self, &aq_nic_cfg->aq_rss);
+ /* Reset link status and read out initial hardware counters */
+ self->aq_link_status.mbps = 0;
+ hw_atl_utils_update_stats(self);
+
err = aq_hw_err_from_flags(self);
if (err < 0)
goto err_exit;
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index 36fddb1..e4a22ce 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -397,6 +397,10 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self,
*/
aq_hw_write_reg(self, tx_dma_total_req_limit_adr, 24);
+ /* Reset link status and read out initial hardware counters */
+ self->aq_link_status.mbps = 0;
+ hw_atl_utils_update_stats(self);
+
err = aq_hw_err_from_flags(self);
if (err < 0)
goto err_exit;
--
2.7.4
Powered by blists - more mailing lists