netdev - [PATCH 1/2] dt-bindings: add sff,sff binding for SFP support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1ePQju-0003ps-QW@rmk-PC.armlinux.org.uk>
Date:   Thu, 14 Dec 2017 10:27:42 +0000
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     devicetree@...r.kernel.org, Mark Rutland <mark.rutland@....com>,
        netdev@...r.kernel.org
Subject: [PATCH 1/2] dt-bindings: add sff,sff binding for SFP support

Add "sff,sff" for SFF module support with SFP.  These have a different
phys_id value, and also have the present and rate select signals omitted
compared with their socketed counter-parts.

Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 Documentation/devicetree/bindings/net/sff,sfp.txt | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt
index 60e970ce10ee..f1c441bedf68 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.txt
+++ b/Documentation/devicetree/bindings/net/sff,sfp.txt
@@ -3,7 +3,9 @@ Transceiver
 
 Required properties:
 
-- compatible : must be "sff,sfp"
+- compatible : must be one of
+  "sff,sfp" for SFP modules
+  "sff,sff" for soldered down SFF modules
 
 Optional Properties:
 
@@ -11,7 +13,8 @@ Transceiver
   interface
 
 - mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
-  module presence input gpio signal, active (module absent) high
+  module presence input gpio signal, active (module absent) high. Must
+  not be present for SFF modules
 
 - los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
   Indication input gpio signal, active (signal lost) high
@@ -24,10 +27,11 @@ Transceiver
 
 - rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
   Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
+  Must not be present for SFF modules
 
 - rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
   Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
-  high Tx rate
+  high Tx rate. Must not be present for SFF modules
 
 Example #1: Direct serdes to SFP connection
 
-- 
2.7.4