[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171221113254.GB9930@lunn.ch>
Date: Thu, 21 Dec 2017 12:32:54 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Cc: David Miller <davem@...emloft.net>, netdev@...r.kernel.org,
Mark Rutland <mark.rutland@....com>,
Florian Fainelli <f.fainelli@...il.com>,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Rob Herring <robh+dt@...nel.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net-next v7 1/2] dt-bindings: net: add DT bindings for
Socionext UniPhier AVE
> +Optional properties:
> + - resets: A phandle to the reset control for the MAC
> + - local-mac-address: See ethernet.txt in the same directory.
> +
> +Required subnode:
> + - mdio: Device tree subnode with the following required properties:
> +
> +Example:
It sounds like there should be some properties before the Example.
Andrew
> +
> + ether: ethernet@...00000 {
> + compatible = "socionext,uniphier-ld20-ave4";
> + reg = <0x65000000 0x8500>;
> + interrupts = <0 66 4>;
> + phy-mode = "rgmii";
> + phy-handle = <ðphy>;
> + clocks = <&sys_clk 6>;
> + resets = <&sys_rst 6>;
> + local-mac-address = [00 00 00 00 00 00];
Typically you would put a blank line here, before the mdio node.
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ethphy: ethphy@1 {
> + reg = <1>;
> + };
> + };
> + };
Andrew
Powered by blists - more mailing lists