[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1514471171-3894-5-git-send-email-tariqt@mellanox.com>
Date: Thu, 28 Dec 2017 16:26:11 +0200
From: Tariq Toukan <tariqt@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Eran Ben Elisha <eranbe@...lanox.com>,
Moni Shoua <monis@...lanox.com>,
Maor Gottlieb <maorg@...lanox.com>,
Tariq Toukan <tariqt@...lanox.com>
Subject: [PATCH net-next 4/4] net/mlx4_en: Change default QoS settings
From: Moni Shoua <monis@...lanox.com>
Change the default mapping between TC and TCG as follows:
Prio | TC/TCG
| from to
| (set by FW) (set by SW)
---------+-----------------------------------
0 | 0/0 0/7
1 | 1/0 0/6
2 | 2/0 0/5
3 | 3/0 0/4
4 | 4/0 0/3
5 | 5/0 0/2
6 | 6/0 0/1
7 | 7/0 0/0
These new settings cause that a pause frame for any prio stops
traffic for all prios.
Fixes: 564c274c3df0 ("net/mlx4_en: DCB QoS support")
Signed-off-by: Moni Shoua <monis@...lanox.com>
Signed-off-by: Maor Gottlieb <maorg@...lanox.com>
Signed-off-by: Tariq Toukan <tariqt@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 5 +++++
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 +++++++
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 +
3 files changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
index 5f41dc92aa68..1a0c3bf86ead 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -310,6 +310,7 @@ static int mlx4_en_ets_validate(struct mlx4_en_priv *priv, struct ieee_ets *ets)
}
switch (ets->tc_tsa[i]) {
+ case IEEE_8021QAZ_TSA_VENDOR:
case IEEE_8021QAZ_TSA_STRICT:
break;
case IEEE_8021QAZ_TSA_ETS:
@@ -347,6 +348,10 @@ static int mlx4_en_config_port_scheduler(struct mlx4_en_priv *priv,
/* higher TC means higher priority => lower pg */
for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) {
switch (ets->tc_tsa[i]) {
+ case IEEE_8021QAZ_TSA_VENDOR:
+ pg[i] = MLX4_EN_TC_VENDOR;
+ tc_tx_bw[i] = MLX4_EN_BW_MAX;
+ break;
case IEEE_8021QAZ_TSA_STRICT:
pg[i] = num_strict++;
tc_tx_bw[i] = MLX4_EN_BW_MAX;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 99051a294fa6..21bc17fa3854 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3336,6 +3336,13 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
priv->msg_enable = MLX4_EN_MSG_LEVEL;
#ifdef CONFIG_MLX4_EN_DCB
if (!mlx4_is_slave(priv->mdev->dev)) {
+ u8 prio;
+
+ for (prio = 0; prio < IEEE_8021QAZ_MAX_TCS; ++prio) {
+ priv->ets.prio_tc[prio] = prio;
+ priv->ets.tc_tsa[prio] = IEEE_8021QAZ_TSA_VENDOR;
+ }
+
priv->dcbx_cap = DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_HOST |
DCB_CAP_DCBX_VER_IEEE;
priv->flags |= MLX4_EN_DCB_ENABLED;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 2b72677eccd4..7db3d0d9bfce 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -479,6 +479,7 @@ struct mlx4_en_frag_info {
#define MLX4_EN_BW_MIN 1
#define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */
+#define MLX4_EN_TC_VENDOR 0
#define MLX4_EN_TC_ETS 7
enum dcb_pfc_type {
--
1.8.3.1
Powered by blists - more mailing lists